KAMUTHI MLA BOREWELL

Amount

Conduction Geocysical Survey with Scientific Instruments including transportation charges

Drilling of 150 mm bore well in Hard rock formation using rig including Erection of casing pipes,transportation and fuel charges of Rig to site and all labour charges etc complete.(As per Local market Rate)

Supply and delivery of 150 mmDia P.V.C.(cs)casing pipe as per standard specification(Cost Excluding GST,Rate as per TWAD Board-2017-2018)

Labour charges for inserting casing pipes assembly (With slot or without slot) in the rilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer

Supply and Delivery of 3 H.P submersible motor 50 lpmX175m head -Three Phase Without Panel board (IS 8034)(,Rate as per TWAD Board-2024-2025)

Supply and Delivery of Panel board (DOL)for 3 HP submersible motor(Rate as per TWAD Board-2024-2025)

4sq.mm PVC insulted copper flat cable(,Rate as per TWAD Board-2024-2025)

40 mm Dia B-Class G.I.Pipes(Medium) for submersible motors in borewell(Rate as per TWAD Board-2024-2025) (180+45)

40 mm dia G.I.Coupling((Cost Excluding GST,Rate as per TWAD Board-2024-2025)

40mm dia G.I.Elbow(Cost Excluding GST,Rate as per TWAD Board-2024-2025)

40mm dia G.I.Union(Cost Excluding GST,Rate as per TWAD Board-2024-2025)

50 mm dia G.M Gate valve & Non Return Valves(Rate as per TWAD Board-2024-2025)

150 mm dia Bore cap(Rate as per TWAD Board-2024-2025)

150 mm dia Bore Clamp set(Rate as per TWAD Board-2024-2025)

Errection for labours charges for 3 HP submersible motor and pump set etc., completed-TWAD SOR-2017-2018(5 to 10HP).

Earthwork excavation and Depositing on bank initial lead of 10 Meters and initial liftof 2 Metres in narrow trenches for laying of pipes for watersupply and sewarage works in Hard stiff clay,stiff black cotton,hard red earth,shales,murram gravel,stoney earth,earth mixed with small size boulders and hard gravelly soil to the full depth as may be directed by departmental officers etc. complete complying with standard specification.

plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30

For Grade Beam

For Lintel,Beam&Slab

For Coloumn,Sunshade

Cement concrete 1:1 1/2:3 (One cement, one and half sand and Three aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification( TNBP No:30)

Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30

Brick Work in CM 1:5 (One part of cement & five parts of sand) mix using Third Class Country Brick Kiln Burnt bricks 8 ¾ " x 4 ¼ " x 2 ¾" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31

Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57

Supplying and Fixing M.S.Door Of Sie 0.75M X 0.60M Using M.S,Flates and plates of Required size and Thickness as Directed By the Departmental Officers Etc,Complete,Cost Including Material and all Labour charges Etc,Complete.(Rate As Per T.W.A.D.S.O.R 2017-2018 Item No:20.0(V) (Rs 3471.00/0.90M X 2.00M) =Rs 1928.30/M2)

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A

Supply and delivery and fixing of HDPE 1000 Liters tank as per 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,(Rate As Per T.W.A.D.S.O.R item No:17.0)

Supplying and fixing of 32Amps DP Switch with Metal Galad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box with P.W.D.Earting(SD No.143)

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearerwire for service connection mains(SD No.68)

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm diaGI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains(SD No.73)

Earthwork excavation and Depositing on bank initial lead of 10 Meters and initial liftof 2 Metres in narrow trenches for laying of pipes for watersupply and sewarage works in Hard stiff clay,stiff black cotton,hard red earth,shales,murram gravel,stoney earth,earth mixed with small size boulders and hard gravelly soil to the full depth as may be directed by departmental officers etc. complete complying with standard specification.For Pipe Laying works(As per TWAD Schedule of rates 2017-2018.)

Supplying and Deliverying of Following HDPE pipe 90.00 mm Dia P8 all cost and conveyence etc

Labour charges for Pipe Line Laying Charges including all cost and conveyance etc., complete

Re- Filling the Excavated Soil Complying with Standard Specification in layers of 15CM Thick Well Rammed and Consolideated after the Pipe and Specials are Laid and Tested

S MUTHURAMALINGAM (BID ID -1112709)

Ganesh Mahalingam (BID ID -1112862)

MUNIYASAMY. K (BID ID -1112652)