Repair of light vehicle approach road from Rajpuri to Pudputra of Amera OCP of Bishrampur Area.

Amount

Excavation in SoB3:B8earth to embankment site with all lifts and lead upto1000 metres as per clauses of section-300

Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying tack coat with catonic bitumen emulsion(RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of [email protected] kg per sqm (dry & hungry bituminous surfaces/granular surfaces treated with primer)

Bituminous macadam (Providing and laying bituminous macadam with minimum 40-60TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder,transported to site ,laid over a previously prepared surface with paver finisher th the required grade,level and alignment and rolled as per clauses 501.6 and 501.70 to achieve the desired compaction)Grading II (19mm nominal nominal size,bitumen conent 3.40%)

Providing and applying tack coat with catonic bitumen emulsion(RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.(i) @ 0.25 kg per sqm (normal bituminous surfaces)

Close Graded Premix Surfacing/Mixed Seal Surfacing.Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) or 13.2 mm to 0.09 mm (Type-b) aggregates using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.

Total impact of GST for the purpose of CTC

M/S KAILASH KUMAR AGRAWAL (BID ID -1138252)

RAKESH KUMAR AGRAWAL (BID ID -1138441)

SHREE SHYAM BABA CONSTRUCTION (BID ID -1138434)