Maintance works at Pudur UPHC Hospital Building in Ward No 14

Amount

Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Comp.SI.No.62-rate for 10m3 MDU-CORP-BUILDING DATA-P-25

Supplying and filling in foundation and basement with Quary Dust in layers of 15cum thick well rammed and consolidated including watering complying with std. specification etc. MDU-CORP-BUILDING DATA-P-27

Cement concrete 1:4:8 (one cement four sand and eight aggregates) Using 40mm gauge hard broken granite jelly for foundation inc. consolidation and dewatering for foundation wherever necessary etc.complete. MDU-CORP-BUILDING DATA-P-28

Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc.., complete (Rcc coloumn footing plinth beam and lintel sides) MDU-CORP-BUILDING DATA-P-31

Plain Cement Concrete 1:2:4 (one cement,two fine aggregates and four coarse aggregates) using 20mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing,laying and labour charge setc.,complete as per standard specification.MDU-CORP-BUILDING DATA-P-27

Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete For Super Structure in Ground Floor.

Plastering with CM1:5(one cement and five sand) 12mm thick 1m2.

Supplying and fixing in position of alulminium Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass necessary glassing clips, rupper beading etc, including necessary dismantling holes in RCC colums beams masonry wherever necessary with power drill it the extent required and made good to the original conditions after fixing as dricted by the departmental officers. All Aluminium section should be anodised to 1.5microns as per ISI

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar1:3 (one cemen tthree sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supply and delivery and fixing of PVC Pipes and specials as per IS Specification. 110mm PVC. Pipe 4kc

110mm PVC. Tee

Construction of inspection chambers of following sizes with earth work excavation for foundation with Dust Filling 10mm thick and Plain cement concrete bed in C.M. 1:5:10 using 40mm HBG jelly 10mm thick for foundation, 23cm thick brick wall work in C.M. 1:5 for chambers, Inner and Outer Plastering with C.M. 1:3 12mm thick, benching, channelling, 75mm thick RCC loose slab covering in C.M. 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc., complet

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m.

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW roundblocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting (SD87)

Supply and fixing of 1200mm (48")sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps. (SD 110)

Add 18% GST

BASKARAN T (BID ID -1084085)