REPAIR MAINT OF FENCING BOUNDARY WALL HARDSTANDING AND PATH AND ALLIED WORKS AT SAG PAKUR AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 50m at low lying area, complete all as specified and as directed.

M&L for 40mm thick cement concrete (1:2:4) type B-1 ( using 20mm graded agg.) as in floor finishing surface even and smooth with using extra cement, complete all as specified and as directed by the Engr-in-charge.

M&L for PCC (1:4:8) type D2,(Using 40mm graded aggregate) of 75mm thick as in path finished without using extra cement,complete all as specified and as directed by the Engr-in-charge.

M&L for 50mm thick cement concrete (1:3:6) type C-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete,complete all as specified and as directed by the Engr-in-charge.

M&L for PCC 1:2:4(Nominal mix)(using 20mm gradded aggregate) type B1 using stone aggregate as in coping benching,complete all as specified and as directed by Engr-in-Charge.

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles,complete all as specified and as directed by the Engr-in-charge.

M&L for PCC (1:4:8) Type D-2 ( using 40mm graded agg.) as in foundation , filling and mass concrete,complete all as specified and as directed by the Engr-in-charge.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc. 6m mean radius built in cement mortar(1:6),complete all as specified and as directed by the Engr-in-charge.

M&L for Providing, RCC Type B0 (1:2:4) (12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating,complete all as specified and as directed by the Engr-in-charge.

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia and confirming to grade 410-O,complete all as specified and as directed by the Engr-in-charge.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc,complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and as directed by the Engr-in-charge.

Material & Labour for 15mm thick rendering in Cement Mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed.

M&L for preparation of new surface and and applying two coats of cement base paint over a coat of chalk whiting primer on walls,complete all as specified and as directed.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls,complete all as specified and as directed by the Engr-in-charge.

Demolition of Stone slabs and tiles laid, bedded and pointed in any mortar any description or thickness in floors, aprons etc,complete all as specified and as directed by the Engr-in-charge.

M&L for liquior finish/glossy finish chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors using white cement and pigments including 15mm thick screed bed in CM 1:6etc (as in patches and as per site condition) as per design/pattern approved by AGE(I) etc, complete all as specified and directed by Engr-in-Charge..

M&L for liquior finish/glossy finish Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35grade over and including 50 thick sand cushion etc, complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as specified and as directed by the Engr-in-charge.

S&F Mild steel framed work as in grills, with ends of bars shouldered work conforming to Fe-410-0 as per existing grills at site,complete all as specified and as directed by the Engr-in-charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Conforming to ( Fe-290 (Gde E-165)),complete all as specified and as directed by the Engr-in-charge.

M&L for Taking down Shutters of any description exc 1 sq but n exc 2 Sqm per leaf and refixing in same opening,complete all as specified and as directed by Engr-in charge.

M/S Subhadip Enterprise (BID ID -3328394)

M/S KUMAR AVINASH (BID ID -3326948)

M/S SINGH ENTERPRISE (BID ID -3328113)

M/S New Builders Corporation (BID ID -3328957)

P .BANERJEE AND CO (BID ID -3327265)

LALAN SHARMA (BID ID -3332571)