SPL REPAIR TO ET-15 (OR BARRACK) OTM ACCN OF SIGNALS RECORDS AND SPL REPAIR TO CHAIN LINK FENCING OF BLDG NO BM-16 (STUDENT OFFRS MD ACCN) AT CMM UNDER AGE BR-I OF GE (EAST) JABALPUR

Amount

Dismantling Asbestos Cement (corrugated, semi-corrugated, etc.) sheets in roof coverings

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling timber scantling 40 sq cm & over in section, any position in unframed work.

Dismantling of battens for tiles, shingles etc of any size including tilting fillets exc 15 cm spaced.

S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A.

S&F mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A.

M&L for preparation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer, on surfaces of any description, over 10cm in width or girth, not otherwise described.

M&L for PCC (1:2:4) type B1 using 20 mm graded aggregate as in bed block/hold fast blocks, benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.

M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600 x 600mm compressing of GI powder coated main runner of dimension 39mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/ 0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. (Make : Armstrong/Everest).

Demolition of cement concrete in ground floor paving n. exc 15 cm thickness below or above ground level complete all as directed.

M&L for 20 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed.

Dismantling floor,hearth or wall tilling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified.

M&L non skid ceramic coloured & designer tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match.

M&L glazed ceramic coloured & digital tiles 350 x 250 x 7/ 450 x 350/7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed.

M&L Machine cut kota stone slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with 20 mm thick CM 1 : 6 bedding.

M&L Machine cut kota stone slab flooring 20 - 25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rendering 10 mm thick CM 1:4.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and fair incl expansion joint at every 3.0m interval and every corner complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar or cement lime motar all as specified.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as specified.

Same all as Item Srl No 21 above but except bricks.

Taking down cement plaster or cement lime plaster from brick walls including racking out joints hacking for keys scrubbing down with water etc complete all as specified.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed.

M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified & directed.

M&L preparing surface of newly plastered walls and applying two coats of oil emulsion distemper over chalk whitening preparatory to distempering.

M&L preparing surface of old plastered walls and applying two coats of oil emulsion distemper over chalk whitening preparatory to distempering.

M&L preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer.

M&L preparing old plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer.

M&L 3mm thick wallcare putty on wall complete.

Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) & removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) & removing from site complete all as specified and directed.

S&F 2nd class teak HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

S & F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed by Engineer-in-Charge.

S & F 35 mm thick, plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned and chemically pressure treated.

S&F factory made soild PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed.

S & F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30 mm thick ( stiles ), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specifications and drawings.

S&F (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed.

S&F (factory made) steel windows with side hung shutters of glazed or fly proofing including projecting type hinges with steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S&F (factory made) steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and directed.

M&L Mild steel work framed such as grills,gratings etc. with ends of bars souldered and or rivetted or forged into spikes,framed guard bars, frame work of water tanks and similar work conforming to Fe-290 (Gd-E-165) complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and with stainless steel wire staples complete all as specified.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane complete all as specified.

Same all as item Srl No 43 above but frosted glass at one side.

S&F 100 mm long Mild steel but hings medium weight complete.

S&F 75 mm long mild steel but hings medium weight complete.

S&F 150 mm long extroded aluminium alloy handles, fabricated type anodized complete

S&F 100mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.

S & F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.

S & F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.

S/F 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.

S & F M S 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete as in repairs.

S&F mild steel small articles as in hold fasts, bands, supports, straps etc complete all as specified and directed. Note : The hold fasts shall be treated with 2 coats of black bituminous paint & cost of the same will be included in the above quoted rate.

M&L for Preparing of new surface of wood and wood based materials of any description not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pinck primerl complete all as specified.

M&L preparation of new steel surfaces of any description and apply two coat of synthetic enamel paint over a coat of red oxide not other wise described over 10 cm width or girth.

S&F in repairs water closet vitreous China (squatting pan) complete including provision of lime concrete bedding vitreous china squatting pan orrisa pattern of size 580 x 440 mm, white, with CI 100mm bore P or S trap front or back inlet and foot rest any pattern excluding flushing cistern complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.

S&F in repairs vitreous China Wash Hand Basin, white, flat back size 550 x 400 mm including cutting for and pinning in ends of brackets including brackets but exclusive taps,waste, chain and leg porcelain stop pan complete all as specified.

S&F in repairs 15mm bore, pillar taps, fany type chromium plated, cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified.

S&F in repairs 15mm bore Bib tap standard of cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified. (Minimum weight 15mm-90gms/20mm- 125gms).

S&F in repairs 15mm bore, angle/stop cock, fancy type, chromium plated, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F grating fixed in repair 100mm dia complete all as specified and directed.

S&F in repairs 15mm size PVC connection with PTMT nuts of length 600 mm.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified.

S & F 75 mm dia, PVC bend complete all as specified and directed.

S&F 110mm dia PVC bend with access door complete all as specified and directed.

S&F 110mm bore PVC junction single 'T' equal with provided access door complete all as specified and directed.

S&F PVC 75mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F PVC 110mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F in repairs UPVC waste pipes in any length with or without ears with cement joints fixed to alls 100 mm dia complete all as specified and directed.

S&F in repairs UPVC waste pipes in any length with or without ears with cement joints fixed to alls 75 mm dia complete all as specified and directed.

S&F in repairs 50mm bore High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m in waste pipe for WHB and sinks,complete all as specified and as directed.

S&F in repairs waste coupling/fitting brass chromium plated for steel sinks,basins etc. with long screwed shanks and fly nuts,flange and bedded in red head cement and other end fixed of bore 32/40 mm.

M&L 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement.

Taking down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store.

M&L for 20 mm dia tubes, 'medium grade', galvanised, with all fitting; fixed to wall, laid in trenches incl necessary cutting chasing pinning and making surface good all as directed.

Taking down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store.

M&L for 15 mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting, chasing, pinning and making surface good as directed.

Dismantling exc1000 and n. exc 2000 ltr cpacity water tanks and removing to store.

S&F 2000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vetical with threaded closed top) hoisted and fixed in position all as specified in SSR Part-I. Note : PVC tank shall be ISI marked and having two layers.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs.

S&F in repairs Soap dish.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, 60cm long between flanges in repairs.

M & L Machine pressed precast coloured concrete interlocking paver block any shape and size of 60mm thickness with grey cement and pigment complete all specified and directed.

M&L for 30mm thick crushed stone sand/ river sand as in cushening layer below interlocking paver tiles well compacted to a true surface.

M & L for 100 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floor finished even and rough complete all as specified and directed.

M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cm x 30cm x 15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern as directed by Engr-in-Charge.

S&F plain mild steel wire of 4mm dia, galvanised class 3, in detatched work such as for mosquito nets and fixing to straining blots, hooks, eyes etc complete all as specified and directed.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, Stops rollers etc.

S&F in repairs 18 mm thick prelaminated coloured solid PVC sheet suitable fixed in MS angle frame work as per specification and drawing (MS Frame shall be measured and paid separately.

Demolition of RCC in any description and any position (reinforcement cut as required to facilitate demolition ) complete all as specified directed.

S & F tor steel or TMT bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including M.S wire (annealed) not less than 0.9 mm dia all as specified and directed.

M&L RCC design mix M-25 (20mm garded stone agg) as in slab supported of wall, beam and columns in floor, including necessary formwork complete all as specified and directed.

S&F in repairs viterous china Urinal, Hal stall type including urinial splinder with complete fittings all as specified and directed by Engr-in-Charge. Make : Parryware/ Jaquar/ Hindware.

Grinding and polishing to existing terrazzo/kota stone flooring including making good to floor with same colour/white cement to mirror polishing and treating with be wax complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5mtr in depth for foundation etc, nexc 10 sqm on plan & getting out as in hard/dense soil all as specified and directed.

M&L for cement concrete 1:4:8, type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete all as specified and directed.

M&L for reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) as in Columns above top of footings; including attached pilasters and buttresses.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

M&l for 75mm bore UPVC Pipes (SCH-40) laid in weep holes complete all as specified & directed.

Returning filling in including, spreading, levelling watering and well ramming in layers n. exc 25 cm thick.

Removal of surplus soil to a distance n. exc 50 mtr from the starting point and at level of 1.5 mtr.

M&L TMT bars 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality confirming to Fe 410-5 or Fe 400-0.

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground in natural ground.

Excavating in post holes or single holes each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface of hard/ dense soil.

M&L rolled mild steel in post and struts in fencing including tops to shape as directed drilling holes notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe 290 Gde E 165.

M & L cement concrete type C2 1:3:6 (40 mm graded stone Aggregate) as in embedding of precast post.

Dismantling of fencing wire mesh any type.

Supply only chain link fencing MS galvanized of weight not exceeding 4.00 Kg/Sqm.

Fixing only chain link fencing incl line wires of size 50/75 x 100mm to any type of standards, rails, straining bolts (weight of chain link fencing should be of not exceeding 4.00 Kg/Sqm).

M&L mild steel bolt machine made with hexagonal or square beads at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and one hexagone or square but length of bolt exc 5 cms but not exceeding 10cm long dia shall be of 5 to 10mm dia.

M&L two coats of synthetic enamel painting over one coat of red oxide on steel and iron surfaces incl necessary preparation of surfaces.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in partition, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified.

S&F for mild steel rolled sections as in main and cross beams, running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A including necessary welding complete all as specified.

Taking down carefully copper/aluminium point wiring (light, fan, power point or bell point etc) complete including fixture and fitting such as switches,ceiling rose holders & regulators light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unservicablelight fitting any type, tube light fitting & fixtures, etc and making good to the dirsturbed surfaces of walls/floor etc to match with existing surfaces including white washing/colour to match with existing wall/floor/ceiloing finishes etc complete all as specified and directed.

Taking down old/unservicable distribution boards by disconnection of electric connection carefully SPN DBs/TPN DBs/main Switch including old unserviceable MCCBs/MCBs, Isolators, etc and making good to disturbed surface etc complete all as specified and directed.

Taking down carefully copper/aluminium Sub Main wiring/service connection of any size from surface/connected/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked colour (Phase for RED/YELLOW/BLUE and Neutral for BLACK colour) drawn through in and including heavy duty pvc concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etcand concealed continuous earth wire of size1.50 sqmm (nominal area), PVC insulated unsheathed multi-stranded copper conductor (green in colour) and connected to common earth dolly including sunken steel terminal box made out of 1.20 mm thick mild steel sheet suitably flushed/concealed to wall having 4 Nos nuts welded to 4 corners and one no bolt welded to MS box for earth wire, suitable size of copper lugs with 3 mm thick laminated/hylem sheet top cover fixed with brass screws and cup washer for one light pointcontrolled by one, one way switch complete all as specified and as directed. .

Same all as per item Srl No 124 above but for One ceiling fan/exhust fan point controlled by one switch complete all as specified by the Engineer-in-Charge.

Same all as per item Srl No 124 above but for One 3 Pin, 5/6 amps socket outlet point, on the same board with with 1.5 Sqmm cable size etc complete all as specified and as directed. .

Same all as per item Srl No 124 above but for One 3 Pin, 5/6 amps socket outlet point , independent board with 1.5 Sqmm cable size etc complete all as specified and as directed. .

Same all as per item Srl No 124 here in before but 2.5 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed. Note :- Item Ser No 124.00 to 128.00 for Chasing in wall/ceiling is deemed included in unit rate quoted by the contractor.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S &F 5 pin socket outlet, 5/6 Amps / 3 pin 5/6 Amps, flush type, ISI marked, complete all as specified and directed.

S & F switch socket combination 2 in 1, 3/5 Pin, 5 Amps, flush type, ISI marked, complete all as specified and directed.

S & F switch socket combination 2 in 1, 3 Pin, 5 pin and 15 Amps, flush type, ISI marked, complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65x 20mm, 3 terminals, complete all as specified & directed.

S & F for step type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd complete all as specified and directed.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for battan fittings, complete all as specified & directed.

S & F for wall mounted LED tube light fitting 20 watts & batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specefied and directed. Make - Philips/Havells/Bajaj.

S & F new 1 X 10 W, 2 feet, LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1 x 10W LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed. Make- Philips/Havells/Bajaj.

S & F for Bldg security LED light fitting of capacity 14 watts with IP 65/66 prptection and pre-wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multistranded from ceiling rose to light fittig including necessary 40mm dia GI pipe Light grade bracket 1.5 mtr long bend to required shape with clamps, nuts, bolts etc and fixed on outer wall of bldg complete all as specified and directed by Engr-in-Charge. Make : Philips cat part No BRP042 LED 14 CW MR S1PSUGR or equeivalent to Havells/Bajaj. Note : The security light fitting shall be fitted with bracket made of GI tubing medium grade of suitable size including fixing clamps on the outer wall of bldgs etc cost are inclusive of items rate).

Supply and fixing 1 x 7.5/10 Watt LED decorative, flexiblewall mounting reading lamp including complete fitting etc all as specified and directed by Engineer-in-Charge.. Make :- Philips/Havells/Bajaj.

M & L for taking down ceiling fan and painting complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Fixing the ceiling fan/exhaust fan with replacement of unsv 3 core PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc complete all as specified and directed.

M&L sub main wiring including PVC conduit of suitable dia with two single core FRLS PVC insulated unsheathed cable, 1100 volts, grade having stranded copper conductor of 06 sqmm nominal cross sectional area each drawn into and all accessories including one single core 6.00 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified and as directed. Note : Two run single core cable (1 x 6 Sqmm single core cable of Red/Yellow/Blue colour for Phase + 1 x 6 Sqmm single core cable Black colour for Nutral), 1 x 6 Sqmm single core cable Green colour for earth conductor and one run of PVC conduit shall be measured as a unit length.

M&L sub main wiring including PVC conduit of suitable dia with two single core FRLS PVC insulated unsheathed cable, 1100 volts, grade having stranded copper conductor of 2.50 sqmm nominal cross sectional area each drawn into and all accessories including one single core 2.50 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified and as irected. Note : (i) Two run single core cable ( 1 x 2.50 Sqmm core cable of Red/Yellow/Blue colour for Phase + 1 x 2.5 Sqmm single core cable Black colour for Nutral) , 1 x 2.50 Sqmm single core cable Green colour for earth conductor and one run of PVC conduit shall be measured as a unit length. (ii) Item Ser No 142.00 & 143.00 for Chasing in wall/ceiling is deemed included in unit rate quoted by the contractor.

S & F for sheet metal enclosure MCB DB TPN 4 Way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc concealed and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F for sheet metal enclosure MCB DB SPN 8 Way vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F MCCB triple Pole and neutral rated capacity 160 Amps, 415 Volts, breaking capcity 36 KA complete all as specified and directed.

Supply & Ffixing 10 KA "C" curve MCB of following poles and current capacity in the DB complete with connection, testing and commissioning complete all as specified and directed :-

415 V 10 KA 'C' curve MCB TPN 100 Amp

240 V, 10 KA 'C' curve MCB SPN 32 Amp

S & F MCB single Pole rated capacity 5 to 32 Amps, 240 Volts, breaking capacity 10 KA "C" curve complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cmx60 cmx 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs asearthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate no 3 of SSR Part-I including PCC foundation/chamber in mix 1:2:4 type B1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Excavation in trenches for laying of cable, poles and stay not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out in soft/loose soil complete all as specified ad dirtected.

M & L for sand cuhioning to under ground cabole provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note :- Measurement shall be done after puning down of sand.

Supplying and laying unreinforced precast cement concrete cable covers, Class LV, Type - 1 Flat, size 250mm x 150mm x 40 mm in trenches for cable protection, embossed with "LT 1100 Volts Electric" on the top surface complete all as specified and as directed by Engr-in-Charge.

Material and labour for boring hole under the road/path/pavment/hard standing with the help of trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 50 mm dia suitable for 0.4 mpa working pressure not less than one metre below ground level complete all as specified & directe buy Engr-in-charge at site. Note :- The cost of HDPE pipe shall be deemed to be included in quoted rate.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc.15 cm thickness (below or above ground level) complete all as specified and directed.

S & F for 50 mm dia GI Pipe light grade for cable protection passing under road/floor or for fixing to poles all as complete all as specified and directed.

Taking down existing old Extg unserviceable LT UG/service cable of any description and size complete all as specified and as directred.

Supply, Laying & testing and commissioning LT underground cable 1100 volts grade, 3.5 core x 35 Sqmm XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trences/ducts, on poles etc of size complete all as specified and directed.

Taking down old/unserviceable MCCB S & F MCCB triple Pole and neutral rated capacity 100 Amps, 415 Volts, breaking capcity 16 KA complete all as specified and directed.

Taking down old/unservicable ceiling fan any type and and deposited in MES store and S & F ceiling fan, 230 volts, 1200 mm sweep with service value of the fan shall be greated than 6.1 as per BIS with necessary aceessories and electrical connections for ceiling rose to fan terminal complete all as specified and directed.

S & F for energy efficient exhaust fan of 300 mm sweep made of metal body ventil Air - DS type complete with louver with bolts nuts and washers size lt 15 cm 12 mm dia embedded in the wall including provision of PVC flexible coppler cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connecttion and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.

Schedule of credit amount of Rs. 1,71,718.00 to be deducted during AOC

M/s Ram Associates

a k builders

M/S BHATIA CONSTRUCTIONS

LAL SINGH & SONS

Goodluck Enterprises