REPAIRS TO CERTAIN TOILETS, SANITARY FITTINGS AND FIXTURES VERTICAL STACKS AND CERTAIN MISC WORKS AT DRDL, ASL, CHEES AND ADJOINING AREA UNDER AGE B/R-I, HYDERABAD

Amount

S & F in repairs PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as directed.

S & F in repairs PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as directed.

S & F in repairs PVC (SWR) bends (any radius) suitable for 110 mm bore pipe complete all as directed.

S & F in repairs PVC (SWR) bends (any radius) suitable for 75 mm bore pipe complete all as directed.

S&F in repairs for 75mm dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as directed.

M&L Brick work with sub- class 'B' class bricks straight or curved on plan exc 6m mean radious in CM (1:6), including demolition of brick work complete all as specified and directed.

M&L Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, including demolition of brick work complete all as specified and directed.

M&L for 15 mm thick rendering in cement motar (1:6) on brick or concrete faces finished even & smooth without using extra cement, complete all as specified and directed.

M/L for Rendering 5 mm thick in CM (1:3) on fair faces of concrete surfaces ceiling etc, finished even and smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with watercomplete all as directed.

M/L for Rendering 15 mm thick in CM (1:6) on fair faces of concrete surfaces ceiling etc, finished even and smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with watercomplete all as directed.

M&L for Preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as directed.

M&L for complete removal of existing treatment of walls/ ceiling, washing with water and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emeny paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- Tractor Emulsion of Asian Paints or techno commercially equivalent in Indigo paints

M&L for preparation of new walls/ ceiling, and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emeny paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- Tractor Emulsion of Asian Paints or techno commercially equivalent in Indigo paints

Complete removal of existing treatment on surfaces of ceiling including rubbing the surfaces with sand paper (emery) to achieve uniform surfaces and applying three coat of white wash over a coat of primer, complete all as specified and directed

M/L for Preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash over a coat of prime, complete all as specified and as directed.

Prepairing old steel surfaces of any description and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for Framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work conforming to Fe- 290. Gde E-165 including dismantling old MS work complete all as directed.

Preparation of new or previously untreated steel surface of any description over 10 cm in width or girth not otherwise described and applying of two coats of synthetic enamel paint over one coat of red oxide primer complete all as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in sunken floor/foundation/mass filling, including demolition of old concrete complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm grade stone agg) 50 mm thick as sunken floor even and fair including demolition of old concrete complete all as specified and directed

M/L Rendering 15mm thick as in sunken portion on brickwork or concrete surfaces in cement mortar 1:3 and finished fair and even including mixing of WPC in mortar complete all as directed. Note: - Supply only WPC shall be measured and paid separately.

M&L water proofing treatment with polymeric standard membrance of weight not less than 3Kg/Sqm with 90 micro high molecular high density polyethylene film sand witched between two layers of poly meric (atactic poly propylene based) bitumen laminated on both sides with 20 micron HMHDPE film over a coat of hot blow bitumen of 85/25 grade applied at the rate of 1.2 Kg per Sqm after priming the surfaces with bituminous emulsion at the rate of 100gms per Sqm duly 10cm over lapped and shall be fused uniformly by LPG torch flame on horizontal/ vertical surface of sunken floors complete all as directed by Engr-in-charge. Make: STP(Super thermolay) / TIKITAR (Hydrostop)/ or techno-commercially equivalent product of IWL

S&F in repairs 40mm dia GI medium grade pipe as in spouts 45cm long including making in holes in RCC and making good in cement mortar 1:1/PCC 1:2:4 complete all as directed.

M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.06 sqm but n.exc 0.11 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match laid on and including 15 mm thick screed bed in cement mortar (1:4) , over 25 mm thick PCC 1:2:4 type B-1 (20 mm graded aggregate) finished even and fair to receive tiles including dismantling of existing tiles including cement mortar bedding (but not bakcing), complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match laid on and including 15 mm thick screed bed in cement mortar (1:4) , over 25 mm thick PCC 1:2:4 type B-1 (20 mm graded aggregate) finished even and fair to receive tiles including dismantling of existing tiles including cement mortar bedding (but not bakcing), complete all as specified and as directed.

M & L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15 mm thick rendering in cement mortar (1:4) as backing coat including dismantling of existing tiles including cement mortar bedding (but not bakcing), complete all as specified and as directed.

M & L for coloured glazed ceramic tiles of size 350x250x7mm /450 x 300 x 7 mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15 mm thick rendering in cement mortar (1:4) as backing coat including dismantling of existing tiles including cement mortar bedding (but not bakcing), complete all as specified and as directed.

M&L for 10 mm thick Endura Parking tiles using white cement and pigments of size 300mm x 300mm with wear resistant coating of approved design laid with cement slurry @ 3Kg/ Sqm over 15mm thick screed bed in cement mortar 1:4 including taking out old unserviceable tiles and depositing the debris in low lying areas exceeding 500mtr but not exceeding 1000mtr complete all as specified and directed.

M&L for 25 mm thick Paving tiles using white cement and pigments of size 300mm x 300mm with wear resistant coating of approved design laid with cement slurry @ 3Kg/ Sqm over 15mm thick screed bed in cement mortar 1:6 including taking out old unserviceable tiles and depositing the debris in low lying areas exceeding 500mtr but not exceeding 1000mtr complete all as specified and directed

S & F Machine pressed precast concrete interlocking paver block any shape and size with gray cement and pigment (approved by GE) confirming to IS 15658-2006 of 60 mm thickness, M-35 grade including laid over 100mm thick sand cushion bed and preparing the surface to uniform level to receive tiles and the corners shall be finished with 1:2:4 PCC (using 20 mm graded stone aggregate) finished the surface even and smooth including taking down old unserviceable tiles complete all as specified and as directed.

M & L for 18 to 20 mm thick granite (of any type) machine cut in floor/platform/tread, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over 15 mm thick screedbed in CM 1:4 including dismantling old existing granite and depositing the debris in low lying areas exceeding 500mtr but not exceeding 1000mtr complete all as specified and as directed.

M & L for 18 to 20 mm thick granite (of any type) machine cut in skirting/dado/riser, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over 15 mm thick screedbed in CM 1:4 including dismantling old existing granite and depositing the debris in low lying areas exceeding 500mtr but not exceeding 1000mtr complete all as specified and as directed.

M & L Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

S&F in repairs vitreous china white wash down water closet pan, pedestal pattern including fixing bolts, 'P' or 'S' trap, plastic water closet seat and cover with recessed bottom with MS CP hinging device (excluding flushing cistern and flush pipe) complete all as all as directed.

S/F in repairs vitreous china Orrissa pattern 'squatting pan', white of size 580x440mm with integral foot rest (excluding flushing cistern and flush pipes) but with its cement concrete bedding and ‘P’ or ‘S’ trap, including PVC pipe upto finished floor level to connect flush pipe, making good all the disturbed surfaces to match the adjoining complete all as directed.

S&F in repairs vitreous china Urinal half stall type,white (excluding flushing cistern and waste pipe), complete.

S & F in repairs WHB vitreous china, 'Flat back or angle back type', white including cutting for & pinning in ends of brackets or existing stand including PVC waste pipe and fitting 32mm complete all as directed.

S&F in repairs WHB vitrteous china glazed,size 550x440mm, Ovel type coloured including cutting for & pinning in ends of brackets or exisiting stand including CP waste pipe and fitting 32mm complete all as specified and directed.

S&F in repairs 12 mm thick toughen glass as in urinal partition fixing with suitable clamp minimum 02 Nos complete all as directed

S & F in repairs PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve float and handle along with suitable flush pipe/bend including brackets, complete all as directed.

S & F in repairs towel rail 600mm long of CP fixed with and including CP brass screws and wooden/plastic cleats complete all as directed.

S & F in repairs PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed

S & F in repairs grating doom 100mm dia of CP complete all as directed

S&F in repairs 32mm waste coupling of cast copper alloy chromium plated (half or full threaded), complete all as specified and directed

S&F in repairs 40 mm waste coupling of cast copper alloy chromium plated (half or full threaded), complete all as specified and directed

S & F in repairs 15 mm, Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed .

S&F in repairs 15m dia pillar taps SWAN NECK type copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed.

S & F in repairs bib cock, cast copper alloy, chromium plated for size 15mm dia with crutch or butter handle, screwed down for iron pipe complete all as directed

S & F in repairs stop cock 15mm dia cast copper alloy, screwed down high pressure, with crutch or butter fly handle, srewed both ends for iron pipe or for unions, complete all as directed by Engineer-in-Charge.

S&F in repairs Urinal spreader high pressure of cast copper alloy chromium Plated screwed for iron pipe

S&F in repairs Push tap high pressure of cast copper alloy chromium Plated screwed for iron pipe

S&F in repairs Gun Metal, globe or gate valves 25 mm bore, with iron whel head screwed both ends for irop pipe

S&F in repairs 15 mm angle valve of cast copper alloy chromium plated, high pressure screwed for iron pipe

S & F in repairs two way bib cock, cast copper alloy, chromium plated for size 15mm dia with crutch or butter handle, screwed down for iron pipe complete all as directed by Engineer-in-Charge.

S&F in repairs health faucet cast copper alloy ,chroimum plated including 1 mtr long pipe, and all fittings to fix screwed down for iron pipe complete all as specified and directed

Repairs to leakage from inlet /out let of over head water storage tanks by using M-seal or tightening of checknut or replacing chuknut etc complete all as directed.

Taking down Cleaning and re-fixing old 15mm dia GI water Tubing with and including new ISI marked pipe fittings, in new or old position on walls, ceiling, floors etc., complete all as directed

Taking down Cleaning and re-fixing old 20mm dia GI water Tubing with and including new ISI marked pipe fittings, in new or old position on walls, ceiling, floors etc., complete all as directed.

S&F in repairs Steel water tubing, medium grade, galvanized of 15mm dia with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete all as directed.

S&F in repairs Steel water tubing, medium grade, galvanized of 20mm dia with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete all as directed.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered 1000 ltr capacity, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered 2000 ltr capacity, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed.

S & F in repair ball valves, PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as directed.

Disconnecting existing OH water tanks of any nature and type and of capacity exc 500 and n.exc 1000 litre, setting aside (or lowering if required) and hoisting if required, re-connecting and re-fixing in position including giving temporary connection till repairs are completed, complete all as specified and directed

Disconnecting water storage/service tank (RCC/PVC tank) exc 250 Litre but not exc 500 Litre capacity, cleaning and removing all scales Dirt, etc from Tank and mouths of circulating and wash out pipes of Tank with bleaching power. Re-hoisting in same position and re-connecting, including writing DATE OF CLEANING and DUE ON complete all as specified and as directed.

All as per item No-66 above but exc 500 ltr but not exc 1000 Litre capacity,

All as per item No.66 above but exc 1000 ltr not exc 2000 Ltrs

Taking down chowkats or frames with shutters (without taking off shutters from frames) area n exc.1.50 sqm each, complete all as directed by Engineer-in-Charge.

Taking down shuters of any description exc 1 sqm and n exc 2 Sqm each

S & F Flush shutter 30mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as directed.

S&F second class 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc. edges of foming plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.

S&F 35 mm thick preformed moulded panelled doors shutters hydraulically hard pressed, wooden fibre blended with synthetic resin, surface finished smooth and pre-stained having melamine finish complete all as specified and directed

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube.

S/F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed by Engineer-in-Charge.

S&F100 mm Mild steel butt hinges medium weight, cold rolled complete all as specified and directed by engr-in-charge.

S & F aluminium anodized, barrel tower bolt of extruded section, 150 mm long complete all as directed by Engineer-in-Charge.

S & F 150 mm size aluminum handles, cast type, anodised complete all as directed by Engineer-in-Charge.

S&F aluminium anodised hasp and staple of size 75 mm with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F Stain less steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staple etc. complete all as directed

S&F in repairs Stain less steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staple etc. complete all as directed

S & F ventilators with top hung shutter including hinges, steel peg stay, including taking down old ventilators complete all as directed.

S & F steel windows with side hung shutters including projecting type hinges with steel hinges and steel peg stay complete with glazing bars, dovetailed or welded, including taking down old windows complete all as directed.

S & F steel windows with side hung shutters including projecting type hinges with steel hinges and steel peg stay complete without glazing bars, dovetailed or welded, including taking down old windows complete all as directed.

S&F in repairs pre-laminated particle board 18 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work.

S&F in repairs block boards, grade 2 quality 25 mm thick interior grade commercial type fixed with screws to timber frame work

S & F sheet glass 3.00mm thick, ordinary quality and glazing with oil putty not exceeding 0.5 Sqm in each pane, complete all as directed.

S & F in repairs door closer hydraulically regulated, aluminum body (Die cast), designation No 2, universal type, suitable for door shutter of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as directed.

S&F venetian blinds fabric blinds vertical type including all necessary fittings of approved colour to match the existing size and quality including taking down existing venetian blinds of any type completely with fitings of any type and descriptioncomplete all as specified and directed.

M/L Plain cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate), 25 mm thick as in sub base of floors finished even and fair, including demolition of old concrete complete all as directed by Engineer-in-Charge.

M & L for PCC (1:2:4) type B2 (using 40mm graded stone aggregate), 100mm thick, finished even and fair using extra cement complete all as directed by Engineer-in-Charge.

M & L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) of 75 mm thick as in plinth protection / Path / PCC floor, finished even and fair complete all as directed.

Cutting of plants and grass growth without on bldg's roofs, chajjas and branches coming on bldgs (at any floor and any height), spreading of acid at damage area and repair the same with rendering in Cm 1:4 and removing the material (Branches and plants ) to distance n exc 50m, complete all as specified and directed.

Cleaning of Roof/valley gutter mud, tree leaves etc including water outgoing holes at any hight of bldg, removing the materials (sludge) to distance n exc 50m, complete all as specified and directed.

S&F Gyp board false ceiling with GI grid suspended with 2mm dia GI wire at 60mm c/c holding and clips, gypsum board of 12.5 mm thcik with white paper layer on face side of any size as directed and applying two coats of oil bound distemper over a coat of primer all as directed including dismantling of exisiting ceiling of any type including frame work complete all as specified and directed..

S&F in repairs for plain sheet glass, ordinary quality, 3.0mm thick and glazing with oil putty in square n exc. 0.5 sqm each pane

S & F in repairs sheet glass, ordinary quality, 4.8 mm thick in squares exc. 0.50Sqm each pan and fixing rubber beading and glazing clips complete all as directed by Engineer-in-Charge.

S & F in repairs 12mm thick pre laminated particle board, exterior grade, pre laminated both sides with decorative choice laminations complete all as directed by Engineer-in-Charge.

Taking down existing roof treatment of tarfelt or of any decription completely as directed and removing the debris to a distance exc 250m and n.exc. 500m and depositing where directed

Brushing neat cement slurry with 3.0kg of cement per sqm on roof surface complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.5 mm grade stone agg) 25 mm thick as in padding finished even and fair complete all as specified and directed

M&L for cement screed/rendering 10mm thick in C.M (1:3) over roof slab including parapets inverted beams etc. mixed with water proofing compound, rendering all as specified and directed (WPC shall be measured and paid separately and finished even and smooth without using extra cement complete all as directed by engr-in- charge.

M&L for APP based polymeric membrane minimum weighing 3Kgs/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) over a coat of hot bitumen 85/25 grade applied @ 1.20 Kg/Sqm after priming the surface with bitumenious emulsion (tack coat) @ 100 gms/sqm with 10 cm overlap of the membrane to be provided duly fused uniformly by LPG torch flame complete all as directed .

M&L for preparation of surface and applying one coat of aluminium paint @ 100 ml/sqm over APP membrane all as specified and directed.

Supply only integral water proofing compound.

M/s K L M INFRATECH

M/s K Venkateswara Rao

sri vishnu enterprises

Sai construction & services

SARVBHOMICK INFRASTRUCTURE PRIVATE LIMITED

PAVAN ENTERPRISES

vvcenterprises

M/S GDR CONSTRUCTIONS

SHAH ENTERPRISES