Providing and fitting of wornout components of 10000 GPH x 290 meter head HC pump along with allied works at pumping station Rakh Badali, 3000 GPH x 180 meter head HC pumpset stand by and 70 ampere LT control panel along with allied works at pumping

Amount

Providing and fitting of worn out components of 10000 GPH x 290 meter head HC pump installed at pumping station Rakh Badali by way of disconnecting of all electrical connections, unfastening from base frame decoupling of pump from motor, carrying pump from pumping station to road side by way of head load and then to work shop by mechanical transportation.. Dismantling of pump and extraction of internal parts . Replacement of internal components viz. pump shaft, impeller 05 nos., neck rings, diffusers 5nos., shaft protection sleeve 2nos., gland plate-2nos., check nut 2 nos., DE and NDE bearings with corresponding new components conforming to same size and specifications as per old sample. Assembling the unit and shifting backs to pumping station by using manual labour, tools and tackles and mechanical transport. Lowering of pumping unit on base frame , fitment, coupling pump and motor after proper leveling & alignment including replacement of nuts, bolts, rubber bushes and gaskets at delivery and suction side and testing the pumping unit on load at site. Complete job includes cost of material, labour charges, manual carriage, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

Providing and fitting of worn out components of 3000 GPH x 180 meter head HC pump installed at pumping station Battal Ballian by way of disconnecting of all electrical connections, unfastening from base frame decoupling of pump from motor, carrying pump from pumping station to road side by way of head load and then to work shop by mechanical transportation.. Dismantling of pump and extraction of internal parts. Replacement of internal components viz. impeller 04 nos., neck rings, diffusers 05nos., shaft protection sleeve 4nos., gland plate-2nos., check nut 2 nos., DE and NDE bearings, coupling with bolts and bushes with corresponding new components conforming to same size and specification as per old sample. Assembling the unit and shifting backs to pumping station by using manual labour, tools and tackles and mechanical transport. Lowering of pumping unit on base frame , fitment, coupling pump and motor after proper leveling & alignment including replacement of nuts, bolts, rubber bushes and gaskets at delivery and suction side and testing the pumping unit on load at site. Complete job includes cost of material, labour charges, manual carriage, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

Providing and fitting of wornout components of 415v, 3 phase, and 70 ampere LT control panel cum fault analyzer cum auto starter Installed at pumping station Battal Ballian .The job involves dismantling of all the incoming and outgoing power cables from the panel and shifting to workshop. Replacement of damaged solid state fault analyzer cum controller CB4SA unit and 70 ampere main power contactor-MNX-70-1 no. of star delta auto starter with new components conforming to same rating and specifications as per old sample. Assembling the unit and shifting the panel back to site, fitment and testing of the equipment, without load and thereafter on full load. Job includes the cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

G S ENGINEERING WORKS

M/S FASTTRACK ENGINEERS