Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.5 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹53.4 L+₹4.9 L (10.00%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹56.3 L+₹7.8 L (16.0%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | PL ENTERPRISES L1 | Kumar Trading Compony L3 | MOHD SHAKIR L2 |
|---|---|---|---|---|---|---|
| 1.00Supply Of Material | ||||||
| 2.00 | Supply of ISI marked (IS:2878) Portable fire Extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1m long & complete in all respects including initial fill with CO2 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. | 1 | Each | 6,000 ₹6,000 Lowest | 7,500 ₹7,500 | 7,200 ₹7,200 |
| 3.00 | Supply of 'ABC' stored pressure type Dry Chemical Powder (Mono-Ammonium Phosphate) fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:14609. | 1 | Each | 2,500 ₹2,500 Lowest | 2,950 ₹2,950 | 2,900 ₹2,900 |
| 4.00 | Supply of M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar | 1 | Nos. | 170 ₹170 Lowest | 195 ₹195 | 185 ₹185 |
| 5.00 | Supply for filling, spreading & leveling stone boulders of size range
5 cm to 20 cm, in recharge pit, in the required thickness, for all leads
& lifts, all complete as per direction of Engineer-in-charge. | 1 | cum | 540 ₹540 Lowest | 585 ₹585 | 575 ₹575 |
| 6.00 | Supply for filling, spreading & leveling gravels of size range 5 mm to
10 mm, in the recharge pit, over the existing layer of boulders, in
required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge. | 1 | cum | 900 ₹900 Lowest | 990 ₹990 | 985 ₹985 |
| 7.00 | Supply for filling, spreading & leveling coarse sand of size range 1.5
mm to 2 mm in recharge pit, in required thickness over gravel layer,
for all leads & lifts, all complete as per direction of Engineer -incharge. | 1 | cum | 900 ₹900 Lowest | 990 ₹990 | 985 ₹985 |
| 8.00 | Supply for Gravel packing in tubewell construction in accordance with IS: 4097,
includingSupply of gravel fine/ medium/ coarse, in required grading
& sizes as per actual requirement, all complete as per direction of
Engineer-in-charge. | 1 | Cum | 1,100 ₹1,100 Lowest | 1,235 ₹1,235 | 1,220 ₹1,220 |
| 9.00 | Supply of Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes | 1 | metre | 400 ₹400 Lowest | 435 ₹435 | 425 ₹425 |
| 10.00 | Supply of Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
250 mm. dia. RCC Pipes | 1 | metre | 615 ₹615 Lowest | 665 ₹665 | 655 ₹655 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
22 Mar 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PROJECT MANAGER U-02 CNDS U.P. JAL NIGAM DEHRADUN
7 SARSWATI ENCLAVE, BADRIPUR ROAD JOGIWALA, DEHRADUN
AS PER NIT AND BID DOCUMENT
2023_UPCDS_784218_1
288/KARYA-79/06 DT. 13.03.2023
Open Tender
Supply of Materials
Item Rate
120 days
AS PER NIT
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,900
AS PER NIT
₹1 L
23 Mar 2023
14 Mar 2023
22 Mar 2023
14 Mar 2023
22 Mar 2023
14 Mar 2023
Amount
Supply Of Material
Supply of ISI marked (IS:2878) Portable fire Extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1m long & complete in all respects including initial fill with CO2 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
Supply of 'ABC' stored pressure type Dry Chemical Powder (Mono-Ammonium Phosphate) fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:14609.
Supply of M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
Supply for filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Supply for filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Supply for filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
Supply for Gravel packing in tubewell construction in accordance with IS: 4097, includingSupply of gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
Supply of Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
Supply of Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 250 mm. dia. RCC Pipes
Supply of 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarsesand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Supply of fixing of parking tile of size 300x300 mm
Supply of parking tile of size 400x400 mm
Supply of 300 KLD Electro mechinacal work of STP.according to the Drawing & design provided by the department.
Supply of Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
Supply of Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.250 mm. dia. RCC Pipes
Supply of Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.300 mm. dia. RCC Pipes
Supply of Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.450 mm. dia. RCC Pipes
Supply of double flanged (Screwed/Welded) centrifugally (Spun) Ductile iron pipes of class K-9 conforming to IS 8329 200 mm dia Ductile iron double flanged
Supply of double flanged (Screwed/Welded) centrifugally (Spun) Ductile iron pipes of class K-9 conforming to IS 8329 250 mm dia Ductile iron double flanged
Supply of push-on-joints to centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 200mm dia pipes
Supply of push-on-joints to centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 250mm dia pipes
Supply of C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 200 mm diameter
Supply of C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 150mm diameter
Supply of C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 125 mm diameter
Supply of and fixing C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):100mm diameter
Supply of C.I. Double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately. a) 50mm dia
Supply of & fixing HDPE PN-6 Class pipes complete with HDPE. fittings including tranching and refilling etc. (external work)110 mm nominal bore.
Supply of & fixing HDPE PN-6 Class pipes complete with HDPE. fittings including tranching and refilling etc. (external work)140 mm nominal bore.
Supply of HDPE PN-6 Class pipes complete with HDPE. fittings including tranching and refilling etc. (external work) 160 mm nominal bore.
Supply of gate valve (with cap complete with bolts, nuts, rubber insertion etc. 32 mm nominal bore.
Supply of gate valve (with cap complete with bolts, nuts, rubber insertion etc. 25 mm nominal bore.
Supply of erection, testing and commisioning of 2 pole structure for terminating 11 KV O.H supply from electricity supply authority as per specification and drawing of UPCL Drawing.
Supply of Installation, testing and commissioning of 400 KVA 11/0.433 KV, 3 Phase, 50 Hz, Dyn 11, indoor VCC type Transformer, complete with following standard, mountings fillings accessories, etc. as required.a) Name of Manufacturer -- AS er approved brand of UPCL
Supply of assembling erecting connecting, testing and commissioning of sheet metal enclosed outdoor type feeder panel with water proof dust and vermin proof hinged and lockable doors including rain protection cover complete with interconnections, with aluminium wire, tapes, bonding to earth and painting complete as required. The feeder pillar shall consist of MCCB as incoming and MCCB/MCB as outgoing. (Note : This panel shall be a FRONT operated, with cable entry from the top/bottom. The fault with standing capacity shall be 25 KA. ). INCOMING1No. Of 630 Amps TPN MCCB of 36KA service breaking capacity.BUS BAR 1 Set of 630 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 25 KA at 415 volts.3Nos. Phase indicating lamp each lamp shall have one toggle switch .OUTCOMING 400 Amp FP MCCB (36kA) - 2 Nos.
Supply of assembling erecting connecting, testing and commissioning of sheet metal enclosed outdoor type feeder panel with water proof dust and vermin proof hinged and lockable doors including rain protection cover complete with interconnections, with aluminium wire, tapes, bonding to earth and painting complete as required. The feeder pillar shall consist of MCCB as incoming and MCCB/MCB as outgoing. (Note : This panel shall be a FRONT operated, with cable entry from the top/bottom. The fault with standing capacity shall be 25 KA. ). INCOMING1No. Of 400 Amps TPN MCCB of 36KA service breaking capacity.BUS BAR 1 Set of 400 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 25 KA at 415 volts.3Nos. Phase indicating lamp each lamp shall have one toggle switch .OUTGOMING 100 Amp FP MCCB (36kA) - 7 Nos.
Supply of assembling erecting connecting, testing and commissioning of sheet metal enclosed outdoor type feeder panel with water proof dust and vermin proof hinged and lockable doors including rain protection cover complete with interconnections, with aluminium wire, tapes, bonding to earth and painting complete as required. The feeder pillar shall consist of MCCB as incoming and MCCB/MCB as outgoing. (Note : This panel shall be a FRONT operated, with cable entry from the top/bottom. The fault with standing capacity shall be 25 KA. ). INCOMING1No. Of 400 Amps TPN MCCB of 36KA service breaking capacity.BUS BAR 1 Set of 400 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 25 KA at 415 volts.3Nos. Phase indicating lamp each lamp shall have one toggle switch .OUTCOMING 100 Amp FP MCCB (36kA) - 4 Nos.
Supply of assembling erecting connecting, testing and commissioning of sheet metal enclosed outdoor type feeder panel with water proof dust and vermin proof hinged and lockable doors including rain protection cover complete with interconnections, with aluminium wire, tapes, bonding to earth and painting complete as required. The feeder pillar shall consist of MCCB as incoming and MCCB/MCB as outgoing. (Note : This panel shall be a FRONT operated, with cable entry from the top/bottom. The fault with standing capacity shall be 25 KA. ). INCOMING1No. Of 200 Amps TPN MCCB of 36KA service breaking capacity.BUS BAR 1 Set of 200 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 25 KA at 415 volts.3Nos. Phase indicating lamp each lamp shall have one toggle switch .OUTCOMING 100 Amp FP MCCB (36kA) - 4 Nos.1x40 amp FP MCB
Supply of and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 70 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
Supply of making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 70 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
Supply of laying of 3 core standered aluminium conduktor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098(Part-II with latest amendments) 11 KV grade at a depht of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks in sides and on the top put across. The armouring of cable shall be properly connected with earth condutor by clamps etc. 3 x 70 sq.mm.
Supply of material for Earthing with GI earth pipe 4.5 metre long, 40 mm dia including accessories, andSupply of mansonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Supply of material for Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories andSupply of masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7m long etc, with coke and salt ) as required.
Supply of material for Earthing with copper earth plate 600mm x 600 mm x 3mm thick including accessories and Supply of masonary enclosure with cover plate having locking arrangement and watering pipe 2.7m long etc, with coke and salt ) as required.
Supply of 25 mm X 5 mm G.I strip
Supply of of 25mm x 5mm G.I strip in 40mm dia G.I Pipe from earth electrode as required.including connection with G.I. nut bolt, spring washer excavation and re-filling etc. as required.
Supply of earth bus bar of 50 mm x 5 mm copper strip on surface for connections etc. as required.
Supply for Laying of 40mm X 5 mm G.I strip from earth electrode directly in the ground as required complete in all respects including testing joint of G.I strip 40mm x 5 mm and 150mm long with G.I bolts and nuts etc. complete in all respects
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq.mm and upto 95 sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 95 sq.mm and upto 185 sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 185 sq.mm and upto 400 sq.mm
Supply for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sqmm. (28mm)
Supply for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sqmm. (28mm)
Supply for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sqmm. (32mm)
Supply for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 50 sqmm. (35mm)
Supply for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 150 sqmm. (50mm)
Supply for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 185 sqmm. (57mm)
Supply for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 300 sqmm. (70mm)
Supply of aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 240 sqmm 3.5 core
Supply of aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 150 sqmm 3.5 core
Supply of aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 70 sqmm 3.5 core
Supply of aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 35 sqmm 3.5 core
Supply of aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 10 sqmm 4 core
Supply of aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 50 sqmm 3.5 core
Supply of aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade .6 sqmm 2 core
Supply of 7 Mtr High hot dip Galvanized Octagonal Pole with bottom 130mm A/F, top 70 mm A/F made up of 3 mm thick HT plate and 220x220x14 mm base plate and 1000 mm long single arm bracket complete with 4 Nos M20 x 700 mmlong " J type " foundation bolts.
Supply of, installation, testing and commissioning of HPF street light Fluorescent Tube Light fitting suitable for 1x 40 watt Fluorescent Tube complete in all respect. complete in all respect. . [ make-CG,OR equivalent ] Eq to philips / wipro
Supply of fixing of Bakelite sheet 3 mm thick of suitable size & connector
Supply of MV danger notice plate of 200 mm x 150 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
Supply of fixing HT danger notice plate 250 mm x 200 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
Supply of and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
Supply of & Laying of 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality
Supply of of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with Supply of all material labour T & P for proper completion of work.
Supply of fixing of fire extinguishers, ABC Type 4.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charges and wall bracket, along with Supply of all materials and labour for proper completion of work.
Supply of of CO2 type fire extinguishers, 4.50 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charges and wall bracket, along with Supply of all materials and labour for proper completion of work.
Supply of DWC Pipe for Ducting of cables 63/50 mm
Supply of DWC Pipe for Ducting of cables 90/75 mm
Supply of DWC Pipe for Ducting of cables 120/103 mm
Supply of DWC Pipe for Ducting of cables 160/136 mm
Supply of DWC Pipe for Ducting of cables 200/175 mm
Supply of DWC Pipe SN 8 for drainage/Rain water Harwasting 150 mm
Supply of DWC Pipe SN 8 for /Drainage/Rain water Harwasting 100 mm
Supply of Chamber cover of precast RCC with frame Size 300x300 mm Light duty
Supply Chamber cover of precast RCC with frame Size 300x300 mm Medium duty
Supply of Chamber cover of precast RCC with frame Size 300x300 mm Heavy duty
Supply of Chamber cover of precast RCC with frame Size 450x450 mm Light duty
Supply of Chamber cover of precast RCC with frame Size 450x450 mm Medium duty
Supply of Chamber cover of precast RCC with frame Size 300x300 mm Heavy duty
Supply of Chamber cover of precast RCC with frame Size 600x600 mm Light duty
Supply of Chamber cover of precast RCC with frame Size 600x600 mm Medium duty
Supply of Chamber cover of precast RCC with frame Size 600x600 mm Heavy duty
Supply of Chamber cover of precast RCC with frame Size 750x750 mm Light duty
Supply of Chamber cover of precast RCC with frame Size 750x750 mm Medium duty
Supply of Chamber cover of precast RCC with frame Size 750x750 mm Heavy duty
Supply of Chamber cover of precast RCC with frame Size 900x900 mm Light duty
Supply of Chamber cover of precast RCC with frame Size 900x900 mm Medium duty
Supply of Chamber cover of precast RCC with frame Size 900x900 mm Heavy duty
Supply of Chamber cover of precast RCC with frame Size 900 mm Dia Heavy Duty
Supply of Chamber cover of precast RCC with frame Size 450 mm Dia Heavy Duty
Supply of Chamber cover of precast RCC without frame Size 300x600 mm Medium Duty
Supply of Chamber cover of precast RCC with frame Size 600x900 mm Medium Duty
MOHD SHAKIR
Kumar Trading Compony
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .