Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹34.8 L+₹1.8 L (5.36%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹37.6 L+₹4.6 L (14.0%)Rejected-Finance ATLANTIS A2 1501 PLOT NO 05 SECTOR 11 NEAR CLOUD 36 GHANSOLI NAVI MUMBAI 400 701 E 97 CWE SUBS BHANDUP | THANE | MAHARASHTRA | 400701 | L3 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8440A REPAIR MAINTENANCE OF MOTORISED MANUAL ROLLING SHUTTERS SLIDING DOOR IN BLDG AT ZONE 4 AND 5 AT NAVAL DOCKYARD AND OTHER UNITS UNDER AGE BR I UNDER GE NW KUNJALI
2022_MES_546600_1
8440/A/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹96,000
Yes
31 Oct 2022
20 Aug 2022
19 Sept 2022
27 Aug 2022
17 Sept 2022
3 Sept 2022
20 Aug 2022 - 27 Aug 2022
Amount
Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed.
-Ditto- as per Item No.1 above but area of shutters exc 10 sqm and n.exc 20 sqm each
-Ditto- all as per srl item No.1 but area of shutter exc 20sqm each Note for Srl Item No. 1 to 3 (i) Spare parts required for srl item No. 1, 2 & 3 shall be measured and paid separately
S&F factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 400mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 600mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer complete all as specified and directed.
S&F factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer complete all as specified and as directed
S&F factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer complete all as specified and as directed
S&F factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and as directed
S&F factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified and directed.
S&F in repair mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters as fixed in repairs complete all as specified and as directed.
S&F in repair mild steel pressed beval handles 150mm long, oval type, enamelled black all as specified and as directed.
S&F mild steel safety lever lock with 4 levers for rolling shutters all as specified and as directed.
M & L for greasing and easing in position of mild steel rolling shutters of area n.exc 10sqm each for full movement and for easy operation for shutters complete all as secified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
M & L for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters complete all as specified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
M&L for greasing and easing in position of mild steel rolling shutters of area exc 20sqm each for full movement and for easy operation for shutters complete all as secified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
M&L for preparing new or previously untreated surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparing old painted surface of any decription over 10cm in width or girth and applying one coat of aluminium paint complete all as specified and directed
S&F plain aluminium sheeting, alloy 31000H4, 1.25mm thick as in covering to door shutters etc, cut to size, edge beads punched including rivets with plain 40mm at joints including bending turning up, mitered angles, stopped ends, outlets etc, as required as in repairs complete all as specified and as directed
Dismantling structural steel works in doors, gates etc but excluding framed truss etc all as specified and directed
S&F rolling shutter with ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, gear box,etc gear operated type with chain wheel and hand chain and one shop coat of primer and erected in position as directed.
S&F rolling shutter without ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, push pull or manual type and one shop coat of primer and erected in position as directed.
S&F for 14 HP single phase for Motorised shutter incl all accessories. All as specified and directed.
Extra for wicket door including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured)
S&F framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed.
M&L for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each
Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame).
S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant complete all as specified and as directed
S&F in repair 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work/metal Frame Work.
Ditto all as ser Item No 36 above but 9mm thick. All as specified and directed.
Taking down existing mild steel SLIDING DOOR for and including replacing the MS Plates, Side guides rails, to guide rails, sponge rubber gaskets, sliding heavy Iron doors roller etc wherever required and refixing in its original polition after repairs including material and labour for greasing and mechanical old and new parts of sliding doors complete all as per of area n.exc 10 sqm each, complete all as specified and directed.
Ditto all as ser Item No 38 above but area of shutter exc 10 sqm and n.exc 20 sqm each.
Ditto all as ser Item No 38 above but area of shutter exc 20 sqm each. Note for Item Nos. 38 to 40: (i)Supply only parts for Srl Item No. 38 to 40 shall be measured and paid separately
Material and labour for sliding heavy Iron doors roller of 150mm dia for sliding Iron doors of any size all as specified and directed by Engioneer-in-Charge.
M&L for greasing and easing in position of mild steel sliding door of area exc 20sqm each for full movement and for easy operation for shutters complete all as secified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
S&F in repair Mild Steel, Plain or corrugated, black sheet 1.6mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members etc. with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required all as specified and as directed
S&F for greasing and easing in position of mild steel sliding door of area n.exc 10sqm each for full movement and for easy operation for shutters complete all as secified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
MADHU ENTERPRIZES
HINDUSTAN BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .