8349 SPECIAL REPAIR TO BLDG NO P77 BSO FURNITURE YARD NEAR AFMC UNDER GE (CENTRAL) PUNE

Amount

Dismantling asbestas cement (corrugated, semi corrugated etc) / GI sheets in roofing / cladding to wall including ridge complete all as specified and as directed.

M & L for PCC type C-1 ,1:3:6 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exc 0.5 Cum , getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm thick including watering and removing surplus soil to a distance not exc 50 Mtr and making good surface as in hard / dense soil complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area not exc 1.50 Sqm each complete and making good disturbed portion of jambs all as specified and as directed.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area exc 1.50 Sqm but not exc 4.00 Sqm each and making good disturbed portion of jambs all as specified and as directed.

S & F three track sliding window & ventiltors with two or more shutter with including using 5 mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mm x 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 Part II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.

S & F 35mm thick flush shutters, solid core onstruction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S & F 100mm MS butt hinges medium weight , cold rolled complete all as specified and as directed.

S & F 200mm mild steel barrel tower bolts, stove enamelled black with bright bolt complete all as specified and as directed.

S & F 150mm mild steel pressed handle, oval type, stove enamelled black complete all as specified and as directed.

S & F 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removal of debris out side defence land complete all as directed.

M & L for 50mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete all as specified and as directed.

M & L for precast concrete solid block masonry exc 10 cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 including dismantling of old brickwork or PCC block masonry, built in cement mortar including all quoins, arches, pillars etc complete all as directed.

Taking down cement plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside of defence land complete all as directed.

M & L for rendering 10mm thick in cement mortar 1:6 on on fair faces of brick / concrete / stone surfaces finished even & smooth with a thin layer of sagol finish in patches complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 in two layers, 5mm thick in CM 1:4 over a coat of 10mm thick in CM 1:4, finished the surface with sponge finish complete all as specified and directed

M & L Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as directed and specified.

M & L Preparation of old plastered or unplastered surfaces of wall and applying one coats of cement base paint all as directed and specified.

M & L for two coats of oil bound distemper over a coat alkali resistent primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and all as directed ..

Material and labour for Non skid coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

M & L for rubber moulded glossy chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises out side of defence land complete all as directed.

M & L for 20 to 25mm thick machine cut Kota stone (400 x 550 mm) in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing upto entire satisfaction of Engineer-in-Charge complete all as specified over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as per item No 30 above but as in skirting

M & L for 50mm thick PCC 1:2:4, type B-0, using 12.5 mm graded stone agreegates as in floor / paving finished the surface even and smooth with using extra cement complete all as specified.

M & L Forming Contraction (Dummy) joints 75mm deep x 10mm wide filled with sealing compound Grade-A complete all as specified and as directed.

Dismantling structural steel work including doors, gates , framed truss etc.

S & F Mild steel Strutural steel work framed as in trusses , purlins rafter , purlins , post etc including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gussete plate and also erecting in true position conforming to Fe-410-W (Gde-E-250) quqlity 'A' complete all as speccified and as directed .

S & F Framed work as in doors or gates of angle or other section with gusset plates, ails, braces etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290-0 Gde E-165 complete all as speccified and as directed .

S & F Mild steel, plain, black sheet (1mm Thick) in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc complete all as speccified and as directed .

S & F Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars, barred iron doors, door chowkats of angle or other section and similar work conforming to Fe.290.Gde-E-165 complete all as speccified and as directed .

S & F MS Plates (plain or chequered) chennels, square cut or notched forming holes, without any attachment etc. conforming to grade E-250 (Fe-410W, quality A) complete all as specified and as directed.

S & F mild steel work in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 290-0 Grade E-165 complete all as specified and as directed.

S & F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line of wire to be measured) complete all as specified and as directed.

M & L preparation of new steel surfaces of any description and applying two coat of synthetic enamel paint on steel surfaces over one coat of zinc primer all as directed.

M & L preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint all as directed.

M & L for form work to sides of concrete foundations, footings, bases of columns, rarft and raft beams sides and soffits (if any) of foundation & plinth beams and similar work vertical or to batter and rough finished the surfaces of concrete all as directed.

M & L for form work to sides of pillars, posts, struts, pears, columns and stanchion rough finsihed the surfaces of concrete all as directed.

M & L form work to sides and soffits of floor or roof beams(Flat), rough finished surfaces of concrete all as directed.

M & L Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) 0.9mm dia or securing with clips etc complete all as specified

All as per item No 47 above but 5mm dia and over including 10mm dia as stirrups , spacers and binders.

M & L for PCC 1:4:8 , type D2 (using 40mm graded stone agreegate) as in foundation , filling and mass concrete all as specified and as directed.

M & L RCC Type B1, 1:2:4 (using 20mm graded stone aggregate) Nominal mix as in footings complete all as specified and as directed.

M & L RCC Type B1, 1:2:4 (using 20mm graded stone aggregate) Nominal mix as in beams complete all as specified and as directed.

M & L RCC Type B1, 1:2:4 (using 20mm graded stone aggregate) Nominal mix as in column , pillars piers and struts etc complete all as specified and as directed.

M & L for 75mm thick PCC 1:4:8 , type D2 using 40mm graded stone agreegate) as in sub base all as specified and as directed.

Taking down steel tubing necessary fittings connection etc for 15mm bore pipe complete all as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed.

S & F tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors 15mm dia complete all as directed.

S & F 1000 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

Supply and fix in repairs 15mm bore dia pillar taps of cast copper with capstan head chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as directed and specified.

S & F in repairs 15mm bore dia stop cock, cast copper alloy chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as directed and specified .

S & F in repair 10 Litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specifiede and as directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

S & F in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed

Supply and Fix in repairs vitreous china coloured Wash hand basin flat back, size 580 x 450mm white excluding pillar taps but including waste pipe & Waste coupling chromium plated and fixing brackets complete all as directed.

S & F in repair PVC connection 15 mm of size with PTMT nut of length 600 mm.

Taking down old unserviceable point wiring (light/fan/socket/power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants,regulators, light fittings etc. removing materials to store for re using or for taking credit and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified.

Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified

Taking down ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal after over hauling the fan, Painting of ceiling fans complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified.

M & L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 Volts grade, ISI - 694 marked, in PVC rigid conduits 20mm dia heavy duty ISI marked in wall/floor/roof including all accessories etc. with Modular sunken boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sqmm single core cable as earth condutor and connecting to common earth dolly complete all as specified for the following:-

(a) One light point controlled by one, one way switch complete all as specified and directed.

(d) One 3 pin 5 Amps socket outlet point controlled by one, one way switch on same board complete all as specified.

(c) One 3 pin 5 Amps Socket outlet point controlled by one, one way switch on independent board complete all as specified

All as per item no. 73 above but with 2.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 Volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 Amps socket outlet point on independent board.

S & F Switch piano, flush type, single pole, one way 5 Amp, 230 Volt complete.

S & F Socket outlet 3 pin, 5 Amps, flush type, multipurpose 230 Volts, single pole one way complete .

M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type, universal, 240 Volts, ISI marked complete

S & F Ceiling fan regulator electronic, step type suitable for ceiling fan 1200 mm sweep 230 Volts single phase AC complete

S & F ceiling rose surface type three terminals complete

M & L for Sub main wiring complete with two single core 1.5 Sqmm,1100 Volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 1.5 Sqmm drawn in and including surface PVC rigid conduit including all accessories including taking down old sub main wiring complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any extra claims. (ii) 3 runs of 1.5 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 2.5 Sqmm,1100 Volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 Sqmm drawn in and including surface PVC rigid conduit incl accessories including taking down old sub main wiring complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any extra claims. (ii) 3 runs of 2.5 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)

M & L for Sub main wiring complete with four single core 4 sqmm and one core of 4 Sqmm earth wire,1100 Volts FRLS grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in and including PVC rigid conduit including accessaries including taking down old sub main wiring complete. (Note:- Making good of disturbed surfaces will be done by contractor without any extra claims. (ii) 5 runs of 4 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.)

Supply & Fix in replacement LED Low Bay Commercial Indoor 40 Watt complete with all fixing accessories, clamps, nuts, bolts, and necessary connection by providing 3 core multiflexible round copper wire of suitable size complete.

Supply and fix in replacement LED Tube light fittings wall / Ceiling mounted, 20 Watt LED 6500K with Ultra bright LED Polycarbonate tube light with very high efficiency provided with high efficient integral constant current LED Driver 230 Volt etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector complete all as specified and as directed.

S & F in replacement LED Securuty light of luminaires 24 Watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector complete .

S & F vertical 4 Way TPN double door, recess mounted / wall mounted including MCCB as incomer and outgoing MCB SP / TP 3 pole V-Tec of 63 Amps rating & 16 KA breaking capacity, MCCB is to be pre-fitted at factory all as specified and as directed. (Note : Empty space shall be covered by blanking plate and connect with lugs without any extra cost )

S & F MCB TPN DB 4 way, double door, with 200 Amp rated busbar 415 Volt all as specified and as directed.

Supply and fixing MCB TPN 40 Amps, 415 Volt, breaking capacity 10 KA, 'B' curve complete with connection all as specified and as directed.

S & F MCB SPN DB 12 Way, double door with 200 Amp rated busbar 240 Volt all as specified and as directed..

S & F MCB SPN DB 8 Way, double door with 200 Amp rated busbar 240 Volt, all as specified and as directed.

S & F MCB SPN, 6-32 Amps, 240 Volts, breaking capacity 10 KA, B-curve installed in existing distribution board complete all as specified and as directed.

Supply and fixing MCB SP 5 to 32 Amp , 240 Volt, breaking capacity 10 KA, 'B' curve complete with connection testing and commissioning all as specified and as directed. .

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Part - I including RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (Note:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

Excavation in trenches in soft / loose soil not exc 1.5 metre wide and not. exc 1.5 metre depth and getting out, including trimming the sides and forming bottom surface to required levels for laying cables complete all as specified and as directed.

M & L for Reinforced concrete pipes class NP2 in 1 RM length each half round of 80mm dia (for bottom and top) all as directed. Note:- Two half round pipe (bottom & top) will be measured as one RM.

Returning, filling in trenches in soil in layers not exc. 25cm including spreading, levelling and well ramming complete all as specified and directed.

Removing surplus excavated material (soil) to a distance not exceeding 50 metre and depositing where as directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed

M & L for 32mm bore dia light grade galvanized pipe with all fitting ISI marked, laid in trenches, under road or fixing on wall / pole / crossing nallah etc complete all as specified and as directed .

Supply, laying, testing, commissioning of cable XLPE insulated armoured heavy duty electric power cable including end termination with necessary cable glands, lugs etc in trenches/ poles/ walls through pipes etc, ISI Marked (1100 Volt grade) with multistranded aluminiuim conductor, cross sectional area 16 Sqmm 4 Core complete all as specified and as directed.

REKHA ELECTRICALS

p k enterprises

ANIL CONSTRUCTION CO.

Suraj Sukhdev More

Parhar Enterprise

Agarwal Agencies

L.T Associate