CERTAIN REPAIR REPLACEMENT TO HARD STANDING CHEQUERED INTERLOCKING TILES CONCRETE FLOORS PATHWAYS AT SECTOR C UNDER AGE BRI OF GE 865 EWS

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolised material out of Military station, complete all as specified and directed.

Demolition of cement concrete in any description and any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and as directed.

Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description, complete all as specified and directed.

M&L for Cement concrete type D-2,1:4:8 (using 40mm graded crushed stone aggreate) 100 mm thick as in sub -floors, sub- bases, floors and pavings, etc, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 80mm thickiness M-35 grade complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 40 mm thickiness M-35 grade complete all as specified and as directed.

M&L for sand filling (25 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed.

M&L for Cement concrete type D-2,1:4:8 (using 40mm graded crushed stone aggreate) 75 mm thick as in sub -floors, sub- bases, floors and pavings, etc, complete all as specified and directed.

M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over and including 20mm thick cement screed base in CM (1:6) complete all as specified and directed.

M&L for PCC type D-2 (1:4:8) using 40mm graded crushed stone aggregate as mass concrete and filling of foundation complete all as specified and drected.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M&L for preperation of new surface on Brick, Concrete, Wall and Stone surface of any description and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing boltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 as directed and fixed, complete all as specified and directed.

M & L for Excavating in post holes in so (or similar holes) each n.exc 0.5 cum in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, complete all as specified and directed.

M&L for PCC type D-2, (1:4:8), using 40mm graded crushed stone aggregate as in lean concrete, sub base, or mass concrete, foundation filling etc, complete all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed.

Supply only chain link MS galvanised fencing of size as directed.

M&L for PCC type B1 (1:2:4) using 20 mm graded crushed stone aggregate in coping, mass concrete etc, complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (using 40mm graded crushed stone aggregate) in surface channels and drains all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc, complete all as specified and directed.

Extra for forming fair finished drain or channel 55cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc, complete all as specified and directed.

M&L for pre-cast cement concrete type B1, 1:2:4 (using 20mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed.

M & L for Mild steel TMT bars10mm dia and over cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F mild steel screw bolt 5 to 10 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one waher and hexagonal nut length exc 5cm but not exc 10 cm long, complete all as specified and directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel,) sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complet, Fe 410-W (Gde-E-250) quality A, complete all as specified and directed.

Preparation of newly untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D-2 using 20mm graded crushed stone aggregate as in floor of hard standing finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Hardcore with boken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone agg) 75mm thick sub base of floor etc, complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in floor surface of hard standing, complete all as specified and directed.

M&L pre-cast cement concrete (using 20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks, exc.10cm in width and setting in cement mortar 1:6 including demolition of precast concrete block walling built in cement mortar including all quoins, arches, pillars etccomplete all as specified and directed.

Ditto all as per Item No 34 but except blocks, complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick works finished even and smooth with mixing of water proofing compound as per manufacturers instructions without using extra cement in cement mortar 1: 4 complete all as specified and as directed

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for preperation of new plastered wall surface of any description and applayng two coats of cement based paint over a coat of chalk whiting complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint complete all as specified and as directed.

Schedule of Credit

PARIDHI CONSTRUCTION (BID ID -3286503)

Horizon Construction Company (BID ID -3285667)

ABID CONSTRUCTION COMPANY (BID ID -3286537)

Rampal Singh Contractor (BID ID -3285438)

M/S Stanzin Tharchin (BID ID -3283762)

ESS AAR ENTERPRISES (BID ID -3285322)

M/S Praveen Kumar and Sons (BID ID -3286449)

M/S RIGDOL CONSTRUCTION (BID ID -3286392)