Construction of Boundary wall for transformer protection in pump canal of OL-44 Ex-Km 94.200 of CLMC

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts , levelling , ramming the foundation trenches , removing roots of trees , shrubs all compete as per approved design , building specification and direction of E/I. ( BCD-5.1.1)

Extra for earth work in hard soil as per specification and direction of E/I (vide classification of soil item b). BCD-5.1.2

Providing designation 75 A one brick flat soiling filled with local sand including cost of waterin taxes royalty all complete as per building specification anddirection of E/I

1:3:6 (1 cement:3 coarse sand (zone -III):6 graded stone aggregate 20 mm nominal size).( BCD-5.3.1.4)

1:1.5:3 (1 cement : 1.5 coarse sand (zone -III):3 graded stone aggregate 20 mm nominal size) BCD-5.3.1.1

1:1.5:3 (1 cement : 1.5 coarse sand (zone -III):3 graded stone aggregate 20 mm nominal size). (BCD-5.3.2.1)

Providing Tor steel reinforcement of 10 mm,12 mm & 16 mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for sail & TATA Steel) (a) 10 mm (TMT coil Fe 500)(Only valid For SAIL & TATA STEEL (BCD-5.5.5 (a)|

Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of M.S. bars to work site,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for sail & TATA Steel) BCD-5.5.4

Providing designation 75A brick work in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints , cost of screening materials , raking out joints to 15 mm depth ,curing taxes and royality all complete as per building specification and direction of E/I. BCD-5.2.3

Providing 12mm. Thik cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening , curing with all leads and lifts of water , scaffholding taxes and all complete as per building specification and direction of E/I. BCD-5.7.2

Colour washing two coats over a coat of white wash over new surface old surface with approved quality of lime in approved shade including cost of cleaning surface throughly and removing the scales of smoke and mosh marks with jhama rubbing , scaffolding , washing of floors and taxea all complete as per building specification and direction of E/I. BCD-5.8.6

Supplying, fitting and fixing 20 guage G.C.I. sheet gate fitted on M.S. Angle frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangment with haskal and dummy duly fixed in P.C.C. (1:2:4) blocks of required size applied a priming red dia G.I pipe fitted and fixed in floor outlet to drain out water , in cement concrete including cutting hole , making good the wall all complete as per building specification and diretion of E/I. BCD-5.5.29

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly scaffolding and taxes all complete as per building specification and direction of E/I. (BCD-5.8.45)

Centering & Shuttering -Foundations, Footings, bases of columns,etcfor mass concrete BCD-5.3.17.1

Centering & Shuttering- Columns, Pillars, Piers, Abutments, Posts and Struts. BCD- 5.3.17.6

Providing and fixing 1.2 metres high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per RCD:-clause 8.17

CARRIAGE OF MATERIALS-: CEMENT- (65 S+3 US)

SAND- (14 S + 2 US + 1 K)

AGGREGATE (60 S + 2 US)

STEEL- (65 S + 3 US)

BRICKS- (25 S + 3 US)

Add GST @18%

Add Labour Cess @1%