Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹39.9 L+₹2.5 L (6.70%)Rejected-AOC SALGAONKAR HOUSE DRIVERS HILL VASCO DA GAMA GOA 403802 | SOUTH GOA | GOA | 403802 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹41.8 L+₹4.4 L (11.8%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹42.7 L+₹5.4 L (14.3%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹42.9 L+₹5.6 L (14.8%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹37.8 L
EMD Value
₹76,000
Closing Date
1 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANTAK
GARRISON ENGINEER GOMANTAK
Provision of tiles for certain building No P 164 P 472 P 604 and P 606 at NOFRA under AGE BR II in GE Gomantak
2023_MES_613422_1
8570/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
VASCO DA GAMA
As per tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹76,000
Yes
28 Oct 2023
11 Aug 2023
2 Sept 2023
11 Aug 2023
1 Sept 2023
25 Aug 2023
Amount
Dismantling of floor hearth or wall tiling including cement bedding (not backing) removal serviceable filed to store and rubbish off premises.
Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Roughning surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc
Brushing neat cement slurry with 3 Kg of cement per Sqm
Demolition of cement concrete (unreinforced) nexc 15 cm in thickness above ground level.
M&L for surface preperation by mechanical means to remove all loose particles liatance , oil and greese etc and applying two coats of Dr Fixit pidfin 2K all over the sunken portion and upwards over the masonry wall upto 6-7 feet and 6 to 8 hours after completion of first coat , take up second coat application in a direction perpendicular to the first coat . After the second coat is completely dry apply a 3 rd coat of Dr Fixit Pidfin 2K and sprinkle coarse sand while it is still wet .
M&L PCC Cement concrete type D2 (1:4:8) 40mm graded in foundations, filling and mass concrete.
Material & Labour for 25 mm thick PCC type B1, (1:2:4), 20 mm graded aggregate as in floor.
M & L screed bed or bedding layer or mortar 20mm thick for laying floor finishes in CM (1:4).
M & L Rendering a backing coat of 10mm thick in CM 1:4 to receive skirting/backing coats of tiles.
M & L for light shade virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match.
M&L glazed ceramic coloured tiles350x250x 6to7 mm thick/450x350x6to 7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations (inner side only)
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
Taking down Chowkhats or frames exc. 1.5 sq. m but m. exc 4 sqm each with shutters (without taking off shutters from the frames).
Taking down,easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws,etc and refixing in same opening , shutters of any description exc 1 sqm and n exc 2 sqm each Shutters of any description n exc 1 sq. m each all as specified and directed.
S&F aluminium powder coated frame and shutters for patition / windows/ ventilators/doors sliding/fixed/openable type complete with necessary fittings such as two aluminium handle cum lock for each window, roller etc and fixing all as speciefied and directed by Engineer-in-Charge.
S&F glazing with 4 mm thick sheet glass ordinary type including rubber beddings/gasket around glass panes all as specified.
S&F Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.
S & F framed work such as grills gratings etc. with ends of bars shouldered and/or revited to forged into spikes, framed guard bars etc conforming to FE-290 Gde E-165 fixed with fasteners all as specified.
M&L two coats of syenthtic enemel paint paint over a coat of red oxide including preparation of untreated New steel surfaces.
S& F MS flat iron 25 x 3 mm as in hold fast for fixing if chowkats.
M&L for PCC type C1 1:3:6 (using 20 mm graded aggregate) for filling the holes of the hold fasts.
S &F 2nd class H/W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at junctions all as specified.
M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete.
S&F Plain, framed, panelled shutters (any number of panels), 35mm with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
S&F second class Hard wood, 30 mm thick, glazed skelton shutter, open rivetted & prepared, with sash bar, divided into square with plane chamfered or rounded, mitred and rivetted sash bars any numbers.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick of make M/S Kiran Netting or equivalent as approved by GE.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
M & L for two coat of synthetic enamel paint over one coat of primer on new wooden suface including prepation of surface exc. 10 cm width and girth.
M & L for one coat of synthetic enamel painting over old wooden surface over 10 cm width or girth
S & F butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)
S & F 150 mm long Aluminium handles, cast type (ISI marked).
S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).
S&F alumiunium allloy, anodized, sliding door bolt, 300 mm, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed (isi marked).
M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.
S & F 150mm mild steel, in repair ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.
M&L for 20 mm thick ready mix external sand faced cement plaster using factory manufactured pre mix/ready mix of 'roofy mix' of M/s premier floor to roof materials Pvt. Ltd./ easy plast of M/s Ultratech Cement Ltd/ Soundplast PMC-1 of M/s Sound buildcare Pvt Ltd or other equivalnet approved make having minimum composition of C:S (1:4) using fully treated dry, well graded natural sand conforming to IS 383 with neat cement rendering at all heights and locations in two coats for masonary and concrete surfaces including water proofing compound to the first coat of plaster as per manufacturers specifications, racking out joints, hacking of concrete surface, finishing, curing etc as per directions of Engineer-in-Charge.
Dismantling of loose portion of concrete from ceiling and S&F of wiremesh of weight 2.5kg/sqm and apply 25mm average thickness in CM(1:4) mixed with liquid integral WPC (complast 'X' recommended by the manufacturer with guniting machine at a pressure not less than 5kg/sqm finally rendering 10mm thick plaster in CM (1:4) using WPC (Complast 'X' 421 i.e. from M/s Fosroc and nitobound AR from M/S Fosroc or equivalent as approved by GE ) in the proportion recommended by the manufacturer complete all as specified and directed.
M&L for 12mm thick ready mix internal plaster of approved make in single coat at all heights and locations surface, watering , finishing, curing, scaffolding etc.complete all as per directions of Engineer-In-Charge.
M&L for 5mm thick ready mix internal plaster of approved make on ceiling at all heights and locations surface, watering , finishing, curing, scaffolding etc.complete all as per directions of Engineer-In-Charge.
M & L for chipping removing carefully concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debries out side the premises etc complete all as specified and directed by Engr-in Charge. Hard concrete should not be removed by force.
M&L for Clean existing reinforcement with wire/ rotary wire brush making the surfaces free from loose material dirt etc complete, Applying two coats of alkaline rust converting primer FEOVERT of Krishna conchem or Dr. Fixit equivalent confirming to ASTM-B-117 on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and directed by Engr-in Charge.
M&L Carry out application of 'Bi-polar migratory corrosion inhibitor' EPCO-KP-100 or equivalent on concrete surface.complete all as specified and directed by Engr-in Charge.
M&L for Providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster conferming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete.
M&L for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 =1-MONOBOND, 5-Cement, 15-Sand) in damaged areas in 20mm thickness including leveling profiling etc complete all as specified and directed by Engr-in Charge.
M&L for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 =1-MONOBOND, 5-Cement, 15-Sand) in damaged areas in 40mm thickness in two layers including leveling profiling etc complete all as specified and directed by Engr-in Charge.
Replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed by Engr-in-Charge.
M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep hole in structural members at the interval of 500mm center to center in staggered manner or as directed by Engr-in-Charge in RCC structural element. Work shall b e carried out as under :- (i) Cleaning of holes - Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles - Insert 12mm dia Rohibb Teflon nozzles in cleaned holes. External end of nozzlesto be machine to receive outlet of grouting gun. Fix it inside the hole by applying thixotropic epoxy putty to ensure complete sealing . Cure the system for min 12 hrs. (iii) Cutting of nozzles - Cut the nozzles by chiser after completion of grouting without damaging structural elements.
M&L for Injecting low viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including mixing of material. Mixing of materials :- Mixing of material components (part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting maintain the pressureat exit (0.5 to 1.0 kg/cm2) by monitoring pressure gauge at exit. Grout the material through prefixed nozzles in the structural element @ 100ml per nozzle. Repeat the process for all the nozzles. (Beam and columns)
M&L for jacketing arround columns with Micro concrete (Molith-MC) M-40 including all lifts, shuttering, drilling holes and fixing shear Anchor as per specification complete. Note:- Reinforcement shall be measured and paid saperately, (Rates including jacketing, formwork and Micro concrete)
M&L cutting out cracks to 'V'section not exceeding 5mm in existing roofs walls by using machine cleaning the groove to remove all loose laitance & washing with water applying crack fillet Dr. Fixit crack-X Paste/Dr. Fixit crack X powder with the aid of a putty blade compete all as specified and directed.
M & L for apply a coat of SmartCare Primero with dilution ratio of 1:1 with water maintain a coverage of 100 sq.ft/ltr incl removing all dirt and filling crack surface with smart crack filler on wall complete all as per manufacturer specification.
M & L for applying two coats of Advanced Anti-algal Weather/damp Proof 100% acrylic smooth emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane incl preparation of new plastered surface complete all as per manufacturer specification. .
M & L for applying two coats of Advanced Anti-algal Weather/damp Proof 100% acrylic smooth emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane incl complete removal of existing treatment and filling all crack surface of wall with smart crack filler complete all as per manufacturer specification. .
M & L for applying three coats of white wash including preparation of newly plastered surfaces of ceiling.
M & L for applying one coats of white wash including preparation of old plastered surfaces of ceiling
M&L for applying two coats of oil bound distemper over chalk whitening on plastered surfaces, preperatory to distempering of newly plastered surface ceiling.
Material & Labour for applying two coat of oil emulsion distemper on newly surfaces of wall over a coat of primer over wall care putty including perparation complete.
Material & Labour for applying one coat of oil emulsion distemper on old surfaces of wall over a coat of primer over wall care putty including perparation of surface by complete removal of distempered and painted surfaces complete.
Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store
Taking up or down 25mm steel tubing and connections, including cleaning for refixing or removal to store
Dismantling water tanks exc 250 n exc 500 ltr. capacity and removing to store
Dismantling water tanks exc 500 n exc 1000 ltr. capacity and removing to store
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to cutting chases for concealed water tubing , and making good, cutting not exc 10 cm girth in stone, concrete block or slab walls
S&F Rotational moulded polyethylenewater storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all asspecified in SSR Part I of capacity 500 Ltrs.
S&F Rotational moulded polyethylenewater storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all asspecified in SSR Part I of capacity 1000 Ltrs.
S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)
Supplying and laying of 20 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying of 25 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE.
S & F 15 mm stop valves, fancy type chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed.
S & F 15mm, fancy type CP, Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S & F 15mm Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S & F PVC connections 15mm size with PTMT nuts of length 450mm.
S & F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) fixed with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms.
S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding.
S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).
S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding ditto but including brackets including cutting for and pinning in ends of brackets or erecting stand including Supply and fixing of waste pipe.
S & F PVC bath cabinet box type with shutter complete. Make Prayag or equavalentas approved by GE.
S&F in repair 10 Ltr capacity PVC low level cistern “white” with inlet float valve including bracket with 32 mm dia PVC pipe 600 mm long, complete all as specified and directed.
S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, completed.
S & F in repair brass chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete.
S & F in repair toilet paper holder chromium plated complete.
M & L 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S & F 110mm bore PVC (SWR) bends With acces door any radius.
S & F 75mm bore PVC (SWR) bends with access door any radius.
S & F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal.
S & F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal.
Tara Construction
JINTECH
M/S Kartik Enterprises
STAR FABRICATION
SHIVRAJ CONSTRUCTIONS
Paulraj Painters And Civil Engineering Contractors
AATREYA CONSTRUCTION
the bhimani group of companies
SHIVANI ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .