PROVISION OF CERTAIN B/R AND E/M WORKS AT DIFFERENT POCKETS AREA OF AGE B/R AND AGE E/M UNDER GE 859 EWS

Amount

M & L for providing 4mm thick "E" Board in ceiling with galvanised iron snap frame of 'T' section 24 x 38 x 0.70 mm wall/ceiling angle 25x25x0.35mm thick and hanging with 4mm GI wire all fixed arrangement will be done as per manufacturer instruction incl two coat of oil bound distemper over one coat of white wash complete all as specified and directed.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality- A as with complete all as specified and directed.

S & F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F 5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.

S&F Aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

M & L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of CM 1:6 complete all as specified and directed.

M & L for Providing PCC Type B-1, 1:2:4 (20mmgraded agg) as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified.

Surface dressing n exc 15 cm deep in hard /dense soil with complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil with complete all as specified and directed.

Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soil with complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point with complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 in Cement concrete in foundations, filling and mass concrete with complete all as specified and directed.

M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, using broken stone or boulders, watered and rammed to a true surface with complete all as specified and directed.

M&L for 100mm thick Plain Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) a sub-base, floors and pavings etc complete all as specified and directed.

M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement.

M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc with complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on concrete inner surfaces finished even and smooth without using extra cement with complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on concrete outer surfaces finished even and smooth without using extra cement with complete all as specified and directed.

M&L for Prepairing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over one coat of white wash as completed.

M & L for 350 x 250 x7 mm or 450x350x7mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.

M&L for PCC 75mm thick, type C-2, 1:3:6 (using 40mm graded sone agg) in sub-floors, sub-base, floors and pavings etc.

M & L for screed bed or bedding layer of 15 mm thick for laying floor finishes in CM (1:6 ).

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade . (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L for clean sawn Second class hard-wood in scantlings framed work and fixed complete all as specified.

M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M&L for painting wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with complete all as specified and directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for window, ventilators etc are provided with stiles and rails as specified in SSR Part-1, section 8 clause 8.24(b).

S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.

S&F 150mm long aluminium anodized, barrel tower bolts extruded section.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type.

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed(Make: Hindware/Parryware)

S&F 32mm dia waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms) with waste pipe complete all as specified and directed.

S & F fancy typy chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

Supply and fix chromium plated brass Bib taps,cast copper alloywith crutch or butterfly handle, screwed down for iron pipe for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors.

M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed

S&F PVC (SWR) bends any radius with access door, 110mm dia.

S&F PVC (SWR) bends any radius with access door, 75mm dia.

S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm.

S&F PVC (SWR) junction single, (Single T) equal or unequal of dia75mm.

S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors..

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F 20mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

S&F 25mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

S&F PVC connection of 15 mm size with PTMT nuts of length 450 mm.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

S & F Vitreous China squatting pan, "Orissa" pattern, size 580 x440 mm white, with integral foot rest (excluding flusing cistern and flush pipe).

S & F 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets with complete all as specified and directed.

S & F fancy type chromium plated 20mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified

S & F fancy type chromium plated 15mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified

S&F Mild steel flat iron as in hold fasts; complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .

M&L for RCC (Nominal Mix) type B-1, 1:2:4 (20mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like with complete all as specified and directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips with complete all as specified and directed.

S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make:Jindal/Leader/Scico).

S&F Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with complete all as specified and directed.

M&L Plain Cement concrete type C-2, 1:3:6, (40mm graded agg) in surface channels and drains with complete all as specified and directed.

M&L PCC type C-2, 1:3:6 (40mm graded agg) in walls, Drain walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) with complete all as specified and directed.

Supply and fix electric operated storage water heater (Geyser) Model Havells Monza EC (Ivory) capacity 25 ltrs capacity, BEE 5 Star rated vertical type 2KW suitable for operation on AC 230 volts having facility for inlet and outlet water supply connection, indication lamp Red and green with auto cut off system including installation in position with necessary fixing clamp, studs, nut, bolts and washers and grouting in walls and cement work compite and making necessary arrangement for inlet/outlet water supply connection for cold/hot water and texting complete all as directed. Make:Bajaj/Venus/Pearl/Havells

M&L for Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top coveralongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly for One light /Fan point controlled by one switch 6/5 Amp complete all as specified. Make of Cable :- Havells/Polycab/Anchor/Finolex

One 3 pin Socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

One 3 pin 6/5 Amp socket outlet controlled by one switch indep board.

M&L for point wiring with One 3 pin socket outlet, 15Amps, independent, with cables 4 sq. mm size (nominal area),two single core PVC insulated unsheathed,1100 volts grade,multi stranded copper conductor ,in and including PVC casing capping of adequate size with all fittingsand acessories including PVC board with top cover housing/mounting brackets switches,sockets etc,including PVC insulated unsheathed single core multi stranded copper conductor cable of size 4 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch complete all as specified and directed. Make: Havells/ Polycab/ Finolex/KEI

S&F Switch Socket Combination 2 in 1, 3 pin, 6 Amp piano flush type (ISI marked), 240 Volts complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay

S&F for Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal all as specified and directed. Make : Havells/Anchor/Legrand/Crabtree

S&F switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified and directed. Make : Anchor/Havells (Reo)/Kinjal/Kay

S&F ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified and directed. Make : Anchor/Havells /Kinjal/Kay

S&F lamp holder insulated body with back plate suitable for batten fittings complete all as specified and directed. Make : Anchor/Havells /Kinjal/Kay

S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F MCB SPN 40 Amp 240 Volts complete all as specified and directed. Make : Havells/ABB/Schneider/Legrand

S&F sheet metal enclusure for DBs when MCBs to be used single pole and neutral 2 way , 240 volts fixed sunk / flush to the wall or in niche complete all as specified and directed. Make : Havells/ABB/Schneider/Legrand

M&L for Galvanised steel tubes, medium grade for hot & cold water supply of 15mm dia including all random fittings fixed complete to walls, ceilings or in floors etc & testing after laying up to entire satisfaction of engr-in charge all as specified & as directed by engr-in-charge. Make: Bansal/Jindal/ TATA/SWASTIK

S&F Stop valves, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm. complete all as specified and directed

Supply and laying sub main wiring two single core 6 sq mm stranded copper conductorof red & Black colour including 4 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing n caping of suitable size for accomadating the wires Complete. Make: Havells/ Polycab/ Finolex/KEI

Supplying & Fixing of flexible PVC pipe connection, nylon thread reinforced 15 mm dia, 450 mm long with brass union at both ends for 15 mm dia pipe complete all as specified and as directed.

S&F MCB DB CRCA sheet powder coated SPN 4 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F Square shaped recess/suspended mounted environment friendly new generation asthetically ultra modern with high brightness LEDs as light source LED Flat panel, 36 watt, 2'x2'size, complete with driver and all accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cablecomplete all as specified and directed. Make : Crompton Greaves Cat Part No LCTLRNE-36-FO-CDL/WW or equivalent in Philips/Havells

S&F Wall mounted Mirror light LED fitting, 10/11/14 Watt, 2 Feet long incl integrated electronic driver complete all as specified and directed. Make : CG/Philips/Bajaj/Havells

S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10W including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable complete all as specified and directed. Make : Crompton Greaves - Cat Part No LBHP-10-CDL or equivalent in Philips / Bajaj / Havells

S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) complete all as specified and directed . Make - CG/Havells/Philips/Bajaj

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathed in service connections incl pipe protection as per site requirement complete all as specified and directed.

S&F Exhaust fan of size 250mm sweep, plastic body with louver single phase suitable for 230 volts 50 Hz and connecting up complete including provision of 3 core flexible cord cable of size 27/0.183 from ceiling rose to connector of fan complete cutting of holes and fixing arrangement on wall all as specified and as directed. Make : Havells/CG/Bajaj/GEC

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

M&L earthing complete with copper earth plate electrode 600mm x 600mmx3.15mm thick,thick burried directly in ground vertically to a depth not less than 3.0 mtr deep below GL with top edge of the plate not less than 2.5 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt upto 1.5 meter depth all around the earth plate and connected to earth lead of copper strip 20 x 3.15 mm by means of bolts, nuts, check nuts and washers of GI or steel and thimbles and other end of the earth wire connected to DB and protected by galvanized iron or steel pipe light grade 40 mm bore and water pipe 20mm bore GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 and also including making test point for testing of earthing made out of gun metal or phosphorous bronge size 75x75x25 mm complete all as specified and directed. Note : 1. RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.2. Charcoal dust and common salt upto 1.5 meter depth shall be filled in layers of 15 centimeters all around the earth plate. 3. On testing after completion of earthing if desired earth resistance is not achieved , the earthing will be redone at no extra cost to obtain the desired earth values. Note:- Earthing test will be carried out and if desired result item not achieved the earthing will be redone to achieve desired result without any extra payment.

M&L Chemical earthing with copper earth plate 90x60cmx5mm & copper earth strip 32x6mm Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth strip 32x6mm upto test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel wire mesh and medium grade GI wire protection pipe 40mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Supply, Install, Testing and commissioning of Solar Water heating System (Flat Plate collector) based on indirect transfering of heat ,thermosyphon circulation, non pressurised system of capacity 200 LPD with suitable electric backup including accessories as per manufacture design and recomendation complete all as specified and as directed by Engr-in-charge. Note: Rate of solar water system includes the cost of electric backup, stainless steel hot water tank with puf insulation and alluminum cladding 22 SWG, gauges, meters and protection device complete necessory arrangements but does not include the cost of cold water tank, cold water piping and hot water piping. Make : Racold/Supreme Solar/Rashmi Industries /Tata BP Solar India Ltd/Solarcom

Supply and Fixing single pole and neutral enclosures with a two pin and earth plug and socket complete with double pole MCB 20 Amp including necessary fabrication works for fixing on MS stand/ wall complete all as specified.

S&F 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV 25mm outer diameter stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random complete fittings as per site requirement fixed and laid in trenches/floor/under culvert/road crossing etc, complete all as specified and directed. Make : SFMC/Fusion/Finolex

All as per item serial No. 97.00 here-in-before but of size 32mm outer diameter -ditto-

All as per item serial No. 97 here-in-before but of size 40mm outer diameter -ditto-

Supply and fix in repair PP-R Gate valves 25 mm bore with iron wheel head screwed both end as per site requirement complete all as specified and directed.

All as per item serial No. 100.00 here-in-before but of size 32mm outer diameter -ditto-

All as per item serial No. 100.00 here-in-before but of size 40mm outer diameter -ditto-

Making connection of PP-R distribution branch with PP-R main of 16-40 mm outer diameter by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

S & F 20mm bore Bib tap, cast copper alloy with crutch or butter fly handle, cromium plated, fancy type (ISI Marked).

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered (ISI Marked) conforming to IS 12701: 1996 hoisted and fixed in position, including ball brass valve 20mm bore, complete all as specified and directed.

Supply & fixing of framed work such as grill, grating etc with end of bars houldered or riveted or forged into spikers, framed guard bar ,barred iron doors,framed balusters, water tank staging and similar work confirming to Fe 290-0 Gde- E- 165 complete all as specified and as directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 35 Sqmm 3.5 core with required aluminium cable lugs all as specified and directed. Make of Cable : Havells / Polycab / Finolex / Grandlay

S&F Chaneover switch Off load 1000 Amp including MS enclosure fixed on wall complete all as specified & directed.

Supply, installing, testing and commissioning, factory made and tested ,CPRI type tested LT feeder pillar , outdoor type floor mounted , suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber duly insulated The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and LT panel shall bemounted on angular frame work of 50x50x5mm thick angle iron base frame, minimum 60 cm hight and fixed with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, both side opening type, with aprons for cable entry, with double door shutter and locking arrangement and consisting of the following items :- Incoming:- (a) Aluminium bus bar four Nos 1800 Amps each ,fixed on epoxy insulated with panel fixed horizontally, duly insulated with heat shrinkable sleeves in colour code - 04 Nos (b) ACB, 04 Pole, 1200 Amps with ultimate breaking capacity Icu- 50 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 01 No

Outgoing:- (c) MCCB, 04 Pole, 250 Amps with ultimate breaking capacity Icu- 36 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 01 No (Ics=Icu=100%) (d) MCCB, 04 Pole, 200 Amps with ultimate breaking capacity Icu- 36 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 02 No (Ics=Icu=100%) , (e) MCCB, 04 Pole, 125 Amps with ultimate breaking capacity Icu- 25 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 02 No (Ics=Icu=100%) , (f) MCCB, 04 Pole, 100 Amps with ultimate breaking capacity Icu- 25 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 03 No (Ics=Icu=100%) , (g) MCCB, 04 Pole, 100 Amps with ultimate breaking capacity Icu- 25 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 02 No (Ics=Icu=100%) , (h) Voltmeter digital type 0-500 V range (j) Ammeter digital type, CT operated 0-1200 Amp range (k)Indicating lamp LED type -01 Set

M/S Karkies Construction & Co.

M/S ASHOK CONSTRUCTION

D.P. Traders

M/S KUNKAPU ENTERPRISES

M/S POLAR AGENCIES

M/S SM ANSARI

M/S YOGENDRA CONSTRUCTION CO