Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹30.7 L+₹7.1 L (29.9%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 3 | L3₹30.8 L+₹7.2 L (30.5%)Rejected-Finance SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDERREJECTED BEING NOT LOWEST BIDDERREJECTED BEING NOT LOWEST BIDDERREJECTED BEING NOT LOWEST BIDDERREJECTED BEING NOT LOWEST BIDDERREJECTED BEING NOT LOWEST BIDDER | |
| 4 | L4₹31.0 L+₹7.3 L (31.1%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L4 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 5 | L5₹31.3 L+₹7.7 L (32.7%)Rejected-Finance AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L5 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
18 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHADKI
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
PERIODICAL SERVICES CUM WELCOME MAINTENANCE AND MISC B/R REPAIRS FOR CQA (A), NAI AND SQAE AREA UNDER GE(CENTRAL) KHADKI
2024_MES_642941_1
CWE/KKE/TOKEN-75 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
KHADKI
AS PER TENDER
6 documents required · 6 mandatory
₹500
Yes
GE CENTRAL KHADKI
₹98,000
Yes
15 Jul 2024
17 Feb 2024
26 Mar 2024
17 Feb 2024
18 Mar 2024
4 Mar 2024
19 Feb 2024 - 24 Feb 2024
Amount
M & L for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 on wall with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed by Engr-in-charge. (Note : water proofing compound shall be measured & paid separetely)
M & L for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 on wall with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed by Engr-in-charge. (Note : water proofing compound shall be measured & paid separetely)
Supply only water proofing compound complete all as specifed and as directed by Engr-in-charge.
M & L for Rendering 15mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, facia,fins,parapet with WPT etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork and including taking down cement/lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.
M & L for preparation of new plastered surfaces of ceiling, chhajjas, roof projection, facia,fins,parapet etc and applying three coats of white wash complete all as specifed and as directed by Engr-in-charge.
M&L for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Priming plastered and other surfaces with alkali resistant priming paint, on plastered surfaces, preparatory on wall complete all as specified and directed by Engr-in-charge.
M & L for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specifed and as directed by Engr-in-charge.
M & for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engr-in-charge.
M & L for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.
M & L for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion upto height 10 mtr etc complete all as specified and as directed by Engr-in-charge.
M & L for preparation of old plastered /concrete surface of ceiling and applying two coats of oil bound distemper emulsion, white or tinted upto height 10mtr including 1mm thick birla white putty over a coat of primer necessary scaffolding etc complete all as specified and as directed by Engr-in-charge.
M & L for preparation of old plastered or unplastered surface of wall and applying one coat of oil bond emulsion, white or tinted complete all as specified and as directed by Engr-in-charge.
M & L for complete removal of existing treatement on wall surfaces of any description including brooming down with steel wire brushing , scrapping down smoke soot's, moulds , moss and efflorescence, salts, trading oil greasy spots etc and applying two coats of Anti fungal weather proof grade exterior Acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm/Ltr as per manufacturer instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Ltr per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in subsequent coats of paint upto height 10 mtr including necessary scaffolding etc complete all as specified and as directed by Engr-in-charge.
M & L for preparation of old plastered or unplastered or concrete surface of walls, and applying one coat of cement base paint upto height 15mt including necessary scaffolding etc complete all as specified and as directed by Engr-in-charge.
M & L for preparation of old plastered or unplastered surface of walls and applying two coats of cement base paint of approved tint upto height 15 mtr including necessary scaffolding etc complete all as specified and as directed by Engr-in-charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specifed and as directed by Engr-in-charge.
M & L for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specifed and as directed by Engr-in-charge.
M & L for vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tile n. exc 0.36 sqm in floor over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.
All as per Ser item No 18 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.
M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.
All as per Ser item No 20 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.
M & L for Glazed coloured ceramic tiles External/Internal in vertical surface 300mmx450mmx7mm/ 300mm x 600mm x 7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed by Engr-in-charge.
M & L for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.
M & L for Machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.
M & L for Grinding & mirror polishing of old kota stone/marble/baroda green floor/cudappah stone slab /skirting with machine to mirror polish finish in and including making good of wall finishes as per original specification complete all as specified and as directed by Engr-in-charge.
S & F 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed by Engr-in-charge.
S & F 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed by Engr-in-charge.
S & F in repairs 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor upto height 10 mtr etc complete all as specifed and as directed by Engr-in-charge.
S & F in repair for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as directed by Engr-in-charge.
S & F in repair PVC floor trap/Nahani trap 75mm complete all as specifed and as directed by Engr-in-charge.
S & F in repair 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specifed and as directed by Engr-in-charge.
S & F in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall upto height 10 mtr etc complete all as specifed and as directed by Engr-in-charge.
S & F in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specifed and as directed by Engr-in-charge.
S & F for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specifed and as directed by Engr-in-charge.
M & L for disconnecting of existing PVC tank of capacity Exc 250 Ltr & n. exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.
M & L for disconnecting of existing PVC tank of capacity Exc 500 Ltr & n. exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed by Engr-in-charge. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.
S & F in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for vitreous china Urinal, half stall type white standard size (excluding flushing cistern flush pipe and waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing urinal spreader of PTMT any colour, grating and union for discharge pipe fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets.
S & F in repairs PVC symphon with complete set any type/any size as per site requirement) for low level PVC cistern of 10 Ltr capacity as per sample complete all as specifed and as directed by Engr-in-charge.
S & F in repair for 15mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specifed and as directed by Engr-in-charge.
S & F in repairs Central hold basin Mixer chromium plated Hot and cold with copper pipe complete all as specife and as directed by Engr-in-charge.
S & F in repairs Wall Mixer telephonic type chromium plated with CP wall flange complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for PVC flush pipe/Bend (long/short) for low level PVC flushing cistern 40mm bore etc complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specifed and as directed by Engr-in-charge.
S & F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specifed and as directed by Engr-in-charge.
S & F in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specifed and as directed by Engr-in-charge.
S & F in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specifed and as directed by Engr-in-charge.
S & F in repair Rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed by Engr-in-charge.
S & F in repair Rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed by Engr-in-charge.
S & F in repair Sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x355mm x165mm complete all as specified and as directed.
S & F in repair for PVC bathroom cabinet mirror 600x450mm including all necessary arrangement and fitting complete all as specified and as directed by Engr-in-charge.
S & F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed by Engr-in-charge.
S & F in repair for Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15mm bore (Minimum weight 142 gms), complete all as specified and as directed by Engr-in-charge.
S & F in repair for Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20mm bore (Minimum weight 210 gms), complete all as specified and as directed by Engr-in-charge.
S & F in repairs for vitreous china white urinal partition of size 310 x 700mm fixed to wall with brass CP screws fixed complete all as specified and as directed by Engr-in-charge.
S & F in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed by Engr-in-charge.
S & F in repairs of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity n. exc 500 Ltrs complete all as specified and as directed by Engr-in-charge.
S & F in repairs of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity exc 500 Ltrs but n. exc 1000 Ltr complete all as specified and as directed by Engr-in-charge.
M & L for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.
Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface, providing Material and labourfor carrying out non-destructive water proofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, the PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and as directed by Engr-in-charge.
M & L for fixing the metallic packer for hydrophobic PU foam including making holes and sealer all as per manufacturers specification, the PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and as directed by Engr-in-charge. NOTE :- This item is catered only for Material and labour for fixing the metallic packer
M & L for the chemical cleaning of tile joints and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc,as per the sample done at site complete all as specified and as directed by Engr-in-charge.
S & F in repair for gypsum reinforced boards 595x595x8 to 10mm thick for ceiling on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down old/existing ceiling boards of any type (fibre, pulp insulation etc) or insulation boards any thickness incl fillets complete all as specified and as directed by Engr-in-charge.
DARSHAN ENTERPRISES
VP DEVELOPERS AND CONTRACTOR
S.R.M.K Enterprises
MAHESH DADAJI BACHHAV
AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd
BREEZE CONSTRUCTION
Shri Sant Cosntruction
greenstone construction
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .