Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC 606 80 FEET ROAD 7TH BLOCK 2ND PHASE BANASHANKARI 3RD STAGE BANGALORE 560 085 | BANGALORE | BANGALORE | KARNATAKA | 560085 | L1 | Accepted-AOC being L1 | |
| 2 | L2₹47.6 L+₹1.6 L (3.52%)Rejected-Finance NO 212 3RD CROSS KANAKADASA LAYOUT LINGARAJAPURAM BANGALORE 560 084 | BANGALORE | BANGALORE | KARNATAKA | 560084 | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹48.8 L+₹2.9 L (6.21%)Rejected-Finance NO 68 ANJANEYA TEMPLE CROSS OPP M S RAMAIAH HOSPITAL NEW BEL ROAD BANGALORE 560 094 | BENGALURU URBAN | KARNATAKA | 560094 | L3 | Rejected-Finance Rejected being L3 |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
27 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D EAST BANGALORE 93
GE I R AND D EAST BANGALORE 93
CERTAIN REVENEW AND MINOR WORKS AT CDA CEMILAC BANGALORE AND DFRL MYSORE
2023_MES_618135_2
8423
Open Tender
Civil Works
Item Rate
270 days
GE I R AND D EAST BANGALORE 93
D a(i)
9 documents required · 9 mandatory
₹500
Yes
GE I R AND D EAST BANGALORE 93
₹89,000
Yes
9 Feb 2024
16 Nov 2023
4 Jan 2024
16 Nov 2023
27 Dec 2023
24 Nov 2023
17 Nov 2023 - 20 Nov 2023
Amount
M&L for earth work for all kinds of soil in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all as specified and as directed
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m all as specified and as directed
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) all as specified and as directed
Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level Cement mortar 1:6 (1 cement : 6 coarse sand) all as specified and as directed
M&L for Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete (steel shuttering) all as specified and as directed
Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)in all work up to plinth level, excluding the cost of centering, shuttering, finishing (reinforcement shall be measured and paid seperately) all as specified and as directed
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more as in Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level all as specified and as directed
M&L for 10 mm thick internal plaster in CM 1:6 on other than fair faces of walls , finishing the surfaces even and smooth w/o using extra cement all as specified and as directed
M&L for 15 mm thick plaster in CM 1:4 on fair faces of walls , finishing the surfaces even and smooth w/o using extra cement all as specified and as directed
M & L for preparation of plastered or unplastered surface & Distempering 02 coats with oil bound washable distemper of approved brand and manufacture to give an even shade over and including water thinnable priming coat with cement primer all as specified and directed by EIC.
All as per item no.10 above but on old surfaces after and including complete removal of existing treatment of any type and condition complete all as directed by EIC
Material and labour for applying two coats of cement based paint over a coat of alkali resistant primer on newly plastered wall surfaces including preparation etc complete all as specified and as directed
Providing and fixing factory made single extruded WPC 30 mm thick (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) all as specified and as directed
Providing and fixing factory made single extruded WPC Frame size 45 x 70 mm(Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and as directed
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4 mm thickness (weight not less than 10.00 kg/sqm)
Supply only Anodised Aluminium butt hinges 100x63x4mm all as specified and as directed
Providing and fixing aluminium tower bolts, 150mmx10mm dia ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed
Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete size 250x16 mm all as specified and as directed
M&L for 25 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished, including cement slurry, but excluding the cost of nosing of steps etc. complete all as specified & directed
Providing and laying Non skid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete all as specified and as directed
Providing and fixing 1st quality Coloured glazed ceramic tiles of size 450mm x 300mm / 450mm x 350mm , in dado/skirting etc. conforming to IS : 15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade completecomplete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed
All as per Item no.24 above but plain sheet for ridge and for cladding all as specified and as directed
S&F Steel work in built up Hot finished seamless type tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete all as specified and as directed
M&L for applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel/galvanised steel works and painting synthetic enamel paint of approved. Two or more coats on new work all as specified and as directed
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid all as specified and as directed
Supply and fix health faucet(ABS BODY) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as all as specified and as directed
S & F 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed
Providing and fixing C.P. brass stop cock (concealed) in repairs of standard design and of approved make conforming to IS:8931 15 mm nominal bore all as specified and as directed
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore in repairs all as specified and as directed
Providing and fixing vitreous China wash basin of size 550x400mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require all as specified and as directed
Supply only vitreouss china bowl urinal flat back size on 465x355x265mm white with grating and union for discharge pipe including connections to flushing pipe and out going pipes all as specified and as directed
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe - 32 mm dia all as specified and as directed
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes .size of 25 mm internal dia.(concealed on wall),having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
All as per item no.36 above here-in-before but of size of 40 mm internal dia.(Exposed on wall) all as specified and as directed
Providing and fixing 25mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) all as specified and as directed
Providing and placing on terrace (at all floor levels) polyethylene water storage tank 500L, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including removal of old one all as specified and as directed
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm all as specified and as directed
Providing and fixing Stainless steel towel rail complete with brackets fixed to wall with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms all as specified and as directed
S & F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed
S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints fixed in any position on walls, under floors or in trenches etc complete all as specified and as directed
S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor or fixed to walls all as specified and as directed
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and as directed
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. (Ht uoto 20m with necessary scafolding) all as specified and as directed
M&L for finishing walls with 100% premium acrylic external emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (Ht upto 20m with necessary scafolding) all as specified and as directed
Supply and Installation of European Origin Heterogeneous Sports Vinyle Flooring having thickness of 4.0mm, Lab tested product as per European norms. Technical Standards of product is as per following and product is Solvent and heavy metal free : Layer density : 1.25kg/m3, Roll Size : 2 Meter Width x 15 Meter Length +- 1%, Reaction to fire : C-fis1 as per EN 13501-1, Dimensional stability (L/C):0.20%, Light fastness: 6 grade as per EN ISO 105-B02, Adhesion resitance of top layer : 50/50 N/50N, Abrasion Group : 'T' as per MSZ EN 660-1, Residual indentation: 0.2mm max, Chemical resistance: high resistance as per EN 423, Foot comfort, indentation after loading of 15 s:0.4mm in, Slip resistance : class DS as per EN 13893, colour : Green all as specified and as directed
M&L for Earth work in surface excavation in all kinds of soil not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge
M&L for Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and as directed
Material and Labour for Chequered precast cement concrete tiles 22 mm thick Light shade pigment using white cement in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) all as specified and as directed
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required all as specified and as directed
M&L for 15 mm cement plaster in fine sand on the rough side of single or half brick wall or concrete surface of mix 1:6 (1 cement: 6 fine sand) all as specified and as directed
M&L for Finishing walls with water proofing cement paint of required shade on New work (Two or more coats applied @ 3.84 kg/10 sqm) all as specified and as directed
Excavating holes more than 0.10 cum & upto 0.5 cum in all kinds of soil including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m all as specified and as directed
Providing and fixing precoated galvanised steel sheet roofing Ridges plain (500 - 600mm) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete all as specified and as directed
Dismantling G.S. roofing sheet including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead all as specified and as directed
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead all as specified and as directed
Dismantling tile work for thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead all as specified and as directed
Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge.
Providing and fixing aluminium hanging floor door stopper door rubber, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and as directed
Providing and fixing ISI marked M.S. pressed butt hinges of size 125x65x2.12 mm bright finished with necessary screws etc. complete all as specified and as directed
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm all as specified and as directed
Providing and fixing aluminium sliding door bolts of size 300x16 mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and as directed
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door widthfrom 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete all as specified and as directed
Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete all as specified and as directed
M&L for cement conrete 1:2:4 upto plinth level (1 cement : 2 coarse sand derived from natural sources) (Using 20mm graded stone aggregate) all as specified & directed by EIC.
Material and Labour for providing the sealant (pouring grade) in the existing 10mm wide & 40mm deep groove/joint after preparation of joint as per manufacture instructions along with application of primer as per manufacture instructions. (a) Thioflex 600 shall be of M/s FOSROC/ MASTERFLEX TM 700i of BASF or equivalent in CIPY. (b) Primer 7E shall be M/s FOSROC or equivalent in BASF/CIPY. Note :- Application of Epoxy and sealant shall be carried out by authorised applicator of manufacture.
Material and Labour for heavy duty epoxy resign based flooring with moisture barrier of total 5mm thick consisting of preparation and removing exixting epoxy floor topping by light grinding/shot blasting/wire brushing etc to provide mechanical key to receive floor topping. The prepared surface shall be provided using two component epoxy resign based system Nitoprime 25 of FOSROC or equivalent at 6 sqm/litre in one coat and allowed to dry for 24 hrs. Over this primer solvent free 3 part high strength trowel applied screed having mimimum compressive strength of 90/Nmm2, Tensile strength of 20 N/mm2 and flexural strength of 40N/mm2 to thickness of 2mm applied by spreading with towel and finished by proper compaction and allowed to dry to cure for 24 hrs (Nitoflor TS5000 or fosroc or equivalent). After curing two component epoxy resign based system (Nitoflor FC140 or equivqlent) putty mixed with quartz filler quartz filler shall be used for the sealing the porous surface of epoxy screed system, Nitoflor TF5000 of Fosroc or equivalent. After this a shop coat of two compotent epoxy resisn based system, Nitoflor FC150 of FOSROC or equivalent shall be applied in two coats at 400 microns covering 10 sqm of 4.5L pack as top coat. (Note : Applicator of epoxy flooring shall be done with authorised applicator of approved manufacturer) all as specified & directed
M & L for preparation of old wall/ceiling surfaces and applying two or more coat of painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade all as specified and directed (ht upto 20 Mtr including all necessary scaffolding) all as specified and as directed
M& L for preparation of old surfaces of steel/wood surfaces painting with one or more coat synthetic enamel paint all as specified and as directed
Dismantling floor, hearth or wall tiling or mosiac tiles including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off outside of MD land as per direction of Engineer-in-charge.
M&L for 18-20 mm thick Granite stone slab colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, steps, floor etc and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels area of slab upto 0.50 sqm all as specified and as directed
Supply only in repair 15 mm CP cast copper alloy bib taps with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified
Providing and fixing 40 mm Flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete all as specified and as directed
Dismantling 15 to 40 mm dia G.I./PVC pipe exposed on wall including stacking of dismantled pipes (within 50 metres lead) as all as specified and as directed
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 15mm dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc
Providing and fixing PTMT towel rail complete with brackets fixed to wall with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms all as specified and as directed
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground outside of MD land as per direction of Engineer-in-charge.
M&L for 5 mm thick plaster in CM 1:3 , as in ceiling, finishing the surfaces even and smooth w/o using extra cement all as specified and as directed
Supply, install, testing and commisioning of five star rated hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with latest invertor technology with hot & cold having ECO friendely refrigerent gas, copper condenser coil of capacity of 1.5 TR inculding all fixing arrangement (as requirment at site) all as specified and directed by Engr-in-Charge. (including copper pipe and refrigerant gas).
Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of +/- 2.5% and of capacity 4 KVA all as spcified and directed.
Supply and laying of extra copper pipe with nitrile rubber tubular insulation and copper cable using necessary supports and fastners all as spcified and directed
M&L for MS stand duly painted suitable for fixing 2 TR AC outdoor unit and fixed complete all as specified and directed
Making opening/drilling of size 65 mm dia, using heavy duty stone driller/cutter machine in the stone machinry wall for installing spilit type air conditioners and for passing suction and discharge refrigerant pipe lines, drain pipe, cable etc and making good the disturbed surface all as directed.
M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole 20 Amps, 240V MCB all as specified and directed
M & L for Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire
All as per item no.87 above but for 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (for 8 point x 6 Rm = 216 RM) all as specified and directed
All as per item no.87 above but for 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (for 16 point x 6 Rm = 216 RM) all as specified and directed
All as per item no.87 above but for 4 X 10 sq. mm + 2 X 6 sq. mm earth wire all as specified and directed
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) One light point controlled by one way switch
All as per item no.91 above but for One Ceiling fan point/wall fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator all as specified and as directed
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 Amps modular socket outlet and 5/6 A modular switch, connections etc as required all as specified and as directed
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/16 Amps modular socket outlet and 15/16 A modular switch, connections etc as required all as specified and as directed
Supply & fix wall mounted fan 400mm sweep, 230/240 volts, 2050 RPM with all accessories all as specified and as directed.
Supply and fix modular fan regulator electronic step type humming free , 120 w-2 module watts complete all as specified and as directed.
Supply only MCCB 100 Amps, 3 pole, rupturing capacity 16 KA, 415 Volts with adjustable thermomagnetic release and terminal spreaders in existing cubicle panel board, drilling holes in cubicle panel, making connections complete all as specified and as directed.
Supplying and fixing SP 5A to 32A rating 240/415 V, 10KA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete testing and commissioning etc as required all as specified and as directed
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required for 4 way (4 + 12), Double door.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supply and Fix 1.5TR hi wall Split Air Conditioner indoor/outdoor complete with cordless remote control unit and with inbuilt heating and cooling arrangement and digital invertor twin rotary of capacity all as specified and as directed
Supply & fix single pole andneutral enclosure with a two pin and earth plug and soocket complete with one SP 20Amps MCB all as specified and as directed
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA all as specified and as directed
Supply and fix LED Luminaires square type 2 x 2, 35W down lighter complete all as directed
Supply only 20 W 4 Feet Straight Linear LED Batten all as specified and as directed
Prashanth Associates
devan enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .