ELECTRICAL WORK

Amount

(A) Safe loading & carriage including Loading-unloading & proper stacking of following store materials from ESC Tripula to site of work.

S.T. Pole 11 Mtr. Long

S.T. Pole 13 Mtr. Long

ACSR Weasel Conductor

11KV "V" TYPE STEEL X-ARM

11KV DISC INSULATOR WITH FITTING

11KV PIN INSULATOR WITH GI PIN

SINGLE PHASE AB CONDUCTOR

33KV ALLUMINIUM CABLE OF SIZE 3X300SQMM

33KV DISC INSULATOR

33KV DISC FITTING

F BRACKET

33KV STAY SET COMPLETE

STAY SET COMPLETE

EARTHING SET COMPLETE

MS DROPPER CHHANEL

MS TOP CHHANEL

MS CHHANEL T- OFF

MS CHANNEL SUB- STATION

GI WIRE 6SWG (200gm/Meter)

GUARDING ANGLE

ABC OF SIZE 3X95MM2

33KV OUTDOOR CABLE JOINTING KIT

(B) WORK

Errection of 11 Mtr long ST Pole including digging of Pits & fitting of accessories.

Errection of D/P by 11 Mtr Long ST Pole including digging of Pits & fitting of accessories.

Errection of D/P by 13 Mtr Long ST Pole including digging of Pits & fitting of accessories.

Laying, stringing & sagging of 3Ø3wire 11 kv HT line by ACSR weasel conductor including all associated works & making clearance of road with joints/jumpers & binding on insulators as required as per RESSPO norms.

Laying of Single Phase ABC of size 1X16+1X25SQMM. complete in all respect as per RESSPO norms

Laying of ABC 3x95MM2. complete in all respect as per RESSPO norms

Installation of cable box 33 KV (3 x 300) sq mm Outdoor/Indoor. Complete in all respect.

Laying of 33KV. XLPE cable of size 3X300 mm2 in double circuit (main +stand by) under ground by drilling method through drilling machine with all related works and complete in all respect as per RESSPO norms.(Total length of cable =190x2 (double circuit)=380 Mtr.)

Grouting of Poles as per RESSPO norms with grouting materials.

Earthing of poles as per RESSPO norms.

Digging of pits, fixing nozzling & grouting of 11KV stay rods as per RESSPO norms including grouting materials.

Digging of pits, fixing nozzling & grouting of 33KV stay rods as per RESSPO norms including grouting materials.

Fixing of Danger Board. Complete in all respect.

Mounting of LTDB box. Complete in all respect.

Construction of plinth of size 2x2x1.5mtr. for mounting of 250 KVA T/F. complete in all respect as per RESSPO norms required material will be provided by the contractor.

Fabrication of wiremesh fancing of size 2.5x2.5x2Mtr. By M.S angle of size 35x35x5mm and MS flat of size 25x5 mm with wiremesh and each of the same grouted with grouting material.

Stringing and sagging of 2 wire of 6SWG G.I. Wire for guarding and making lacing at 1 meter a part in all the spans .

Painting of Pole with red oxide Paint.

Un-Mounting & Shiffting of 16/25/100KVA T/F from D/P & then Mounting the same on D/P. Complete in all respect.

Un-Mounting & Shiffting of 250KVA T/F from Plinth & then Mounting the same on Plinth. Complete in all respect.

Dismantling of HT/ LT line (Approx.)

Safe cortage of received back material/Scrap from work site to ESC Tripula Raebareli (2370 Kg)

(C) Following Metarials to be supplied by contractor

11KV "V" TYPE STEEL X-ARM HOLDING CLAMP

LT T- OFF CLAMP

LT Shackle Insulator

BOLT & NUT

BARBED WIRE

DANGER BOARD WITH CLAMP

STONE PAD

GI PIPE

LTDB BOX

Red Oxide paint

M/s Sharada Electricals