EXTERNAL PERIODICAL SERVICE OF APS OLD AND NEW COLONY SANJAY VIHAR AND 1 AHQ SIGNAL AND OTHER ADJOINING AREA OF AGE B AND R II UNDER GE CENTRAL DELHI CANTT

Amount

M&L for complete removal of existing treatment from external surfaces of wall by mechanised sander of makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible complete all as specified and all as directed by Engineer in charge and Applying two coats of weather proofing exterior emulsion paint by spray gun/ spray machine incl one coat of primer up to 4 story bldg complete all as specified and all as directed. Note:- (i) Rate quoted up to G+4 bldg including scaffolding. (ii) The work shall be executed through authorised applicator. (iii) Authorized applicator shall be approved by GE before starting of work. (iii) All materials shall be procured directly from manufacture. The purchase voucher shall be produced to the Engr-in-Charge shall be deface the original purchase voucher (iv) MoU with authorized applicator will be submitted successful L1 bidder after opening of Financial Bid within a fixed time frame of 7 days otherwise tender will be cancelled. (v) A guarantee amount of 5 % of contractor of work done will be retained for 5 years of the completion of work.

M&L for complete removal of existing treatment from external surfaces of wall by mechanised sander or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible complete all as specified and all as directed by Engineer in charge and Applying one coats of weather proofing exterior emulsion paint by spray gun/ spray machine incl one coat of primer up to 4 story bldg complete all as specified and all as directed. Note:- (i) Rate quoted up to G+4 bldg including scaffolding. (ii) The work shall be executed through authorised applicator. (iii) Authorized applicator shall be approved by GE before starting of work. (iii) All materials shall be procured directly from manufacture. The purchase voucher shall be produced to the Engr-in-Charge shall be deface the original purchase voucher (iv) MoU with authorized applicator will be submitted successful L1 bidder after opening of Financial Bid within a fixed time frame of 7 days otherwise tender will be cancelled. (v) A guarantee amount of 5 % of contractor of work done will be retained for 5 years of the completion of work.

M&L for applying of exterior wall care putty on newly/old plastered walls of 2-3mm thick including preparing the surface with even and smooth complete all as specified and directed. Note : 1. Wall putty to be procured from manufactures directly. 2. Bidder should consider the Cost of scaffolding in painting item. Seprate payment for scaffolding will not be paid to the contrator.

Taking down cement plaster on brick walls, or stone walls / ceilings etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. Note rate quoted up to G+5 bldg including scaffolding

M & L for 15 mm thick internal rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement, complete all as specified. Note rate quoted up to G+5 bldg including scaffolding

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement complete all as specified. Note rate quoted up to G+5 bldg including scaffolding

M&L for preparation of newly plaster surface of wall / Ceiling surface applying two coats of weather proofing exterior acrylic emulsion paint by spray gun/ spray machine incl one coat of primer up to 5 storey bldg including scaffolding complete all as specified and all as directed by Engr- in-charge. Note:- (i) Rate quoted up to G+4 bldg including scaffolding. (ii) The work shall be executed through authorised applicator. (iii) Authorized applicator shall be approved by GE before starting of work. (iii) All materials shall be procured directly from manufacture. The purchase voucher shall be produced to the Engr-in-Charge shall be deface the original purchase voucher (iv) MoU with authorized applicator will be submitted successful L1 bidder after opening of Financial Bid within a fixed time frame of 7 days otherwise tender will be cancelled. (v) A guarantee amount of 5 % of contractor of work done will be retained for 5 years of the completion of work.

M&L for preparation of newly plaster surface of wall applying two coats of cement base paint by spray gun/ spray machine up to 5 storey bldg complete all as specified and all as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. Note rate quoted up to G+5 bldg including scaffolding

M&L for preparation of newly plaster surface of Ceiling surface applying two coats of white wash by spray gun/ spray machine up to 10m height complete all as specified and all as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. Note rate quoted up to G+4 bldg including scaffolding

M&L for preparation of old decoreated/undecoreated external wall applying two coats of cement base paint by spray gun/ spray machine up to 5 storey bldg complete all as specified and all as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. Note rate quoted up to G+5 bldg including scaffolding

M&L for preparation of old decoreated/undecoreated external wall / Ceiling applying two coats of Oil bound distemper by spray gun/ spray machine up to 5 storey bldg complete all as specified and all as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. Note rate quoted up to G+5 bldg including scaffolding

M&L for Preparation of old painted surfaces of wood surfaces of any description over 10 Cm width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed. Note rate quoted up to G+5 bldg including scaffolding

M&L for Preparation of old painted surfaces of steel of any description over 10 Cm width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed complete all as specified and directed. Note rate quoted up to G+5 bldg including scaffolding

M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed by Engr-in-charge

Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land.

M&L 75mm thick PCC (1:4:8) type D 2 (40mm graded stone aggregate) as in sub base, complete all as specified.

M&L Sand filling (sand cushioning) under floors or in foundation incl watering and consolidation all as spd and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment all as spd and directed

Demolition of brick work built in cement mortar in any description and position, complete all as specified.

Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified.

All as per serial item No 20 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 01 shall be used).

M & L for applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on top of roof surface in multiple coats @2 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and other coats needs to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. When the 2nd coat is wet, the Smartcare EPDM tape (at corners and edges)shall be inserted between second and third coat to secure corners & edges, let the material ooze out from the tapes corner. Same treatment of Smartcare Dampproof shall be continued to the parapet walls to better envelope the whole area. The coating shall be terminated carefully to the other side of the parapet wall.upto G+5 storey bldg Note :- (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator

Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified.

All as per item no.23 here-in-before but dia of GI pipe is 15mm.

S&F 20mm dia GI tubing medium grade with all fittings and connections fixed to wall or ceiling or laid on floor etc complete all as specified an directed.

All as per item no.25 here-in-before but dia of GI pipe is 15mm.

S & F in repairs 100 mm dia cast iron (spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complete all as specified by Engineer-in-Charge Note : For pipes fixed on walls to be suitably clamped using stack clamps to maintain 10 to 15 cm distance from the wall (rates inclusive in this item) of appropriate size @ 2 m apart for height of pipe) and all the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5

S & F in repairs 75 mm dia cast iron (spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complete all as specified by Engineer-in-Charge Note : For pipes fixed on walls to be suitably clamped using stack clamps to maintain 10 to 15 cm distance from the wall (rates inclusive in this item) of appropriate size @ 2 m apart for height of pipe) and all the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5

S & F in repairs 100 mm dia cast iron (Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified by Engineer-in-Charge

S & F in repairs75mm dia cast iron (Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified by Engineer-in-Charge

S & F in repairs Cast iron T of 100mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified by Engineer-in-Charge Note :- All the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5

S & F in repairs cast iron Bends of 75mm dia (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified by Engineer-in-Charge Note :- All the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5

S & F 75mm dia branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access door, complete all as specified and directed. Note :- All the necessary scaffolding, padding, trestles required for carrying out work should be borne by the contractor in this item only and nothing extra should be paid to contractor for height of building upto G+5

All as per item No 33 above but 100mm bore.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete.

S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete.

M&L cement concrete 1:2:4 type B-O (20 mm graded stone aggregate) as in flooring 100 mm thick, including demolition of existing flooring in panell all as specified and disposing to debries etc.complete all as specified.

M/S Parshant Associates (BID ID -3433761)

kailash chawla (BID ID -3433866)

M/S Sunil Steel Works (BID ID -3433687)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3431876)

POONAM ENTERPRISES (BID ID -3431590)

MOUNIKA ENTERPRISES (BID ID -3427523)

M/S SIMRAN CONSTRUCTION CO (BID ID -3433725)