Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹33.9 LAccepted-Finance | L-1 | Accepted-Finance LOWEST TENDERER | |
| 2 | L-2₹35.2 L+₹1.3 L (3.77%)Rejected-Finance PLOT NO 14 NEAR BALGRAM INS SHIVAJI ROAD LONAVLA 410 401 | PUNE | MAHARASHTRA | 410401 | L-2 | Rejected-Finance GREATER THAN L1 | |
| 3 | L3₹37.4 L+₹3.5 L (10.4%)Rejected-Finance FLAT NO 703 7TH FLOOR PARVATI ENCLAVE PLOT NO 180 SECTOR 2 TOLOJA PANCHANANDTAL TALOJA MAJKUR DISTT RAIGAD MAHARASHTRA 410208 | RAIGAD | MAHARASHTRA | 410208 | L3 | Rejected-Finance GREATER THAN L1 | |
| 4 | L4₹37.6 L+₹3.7 L (11.0%)Rejected-Finance BHAIRAVNATH NAGAR AT KUSGAON POST LONAVLA 410 401 DISTT PUNE | PUNE | MAHARASHTRA | 410401 | L4 | Rejected-Finance GREATER THAN L1 | |
| 5 | L-5₹39.0 L+₹5.1 L (15.1%)Rejected-Finance 601 A WING SAI PARAMOUNT APARTMENT SHRADDHA VIHAR COLONY INDIRANAGAR NASHIK NASHIK MAHARASHTRA 422009 | NASHIK | MAHARASHTRA | 422009 | L-5 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
16 Jun 2020, 6:00 pmClosed
Maj Komal Parihar
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
SPECIAL REPAIRS TO CHAIN LINK FENCING FROM BLDG NO.P-102 TO P-105 AND P-176, FROM P-358 TO P-359 AND P-335 TO P-340 AND REPAIRS TO FOOTPATH FROM BLDG NO P-102 TO P-105 AND P-176 AT INS SHIVAJI AND PROVISION OF SHED FOR GAS BANK AND RAISED PLATFORM FO
2020_MES_347172_1
GE/LONAVLA/8920/E8
Open Tender
Civil Works
Item Rate
270 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
4 documents required · 4 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹88,000
Yes
20 Jun 2020
23 May 2020
18 Jun 2020
23 May 2020
16 Jun 2020
2 Jun 2020
24 May 2020 - 1 Jun 2020
Amount
Dismantling wrought iron or mild steel pipe work of any description and at any place complete all as specified and directed.
Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles.complete all as specifed and directed
Dismantling barbed wire fencing any type etc complete all as specified and directed.
Dismantling RCC posts or struts any section, including taking out embaded portion and macking good disturbed ground complete all as specified
Demolition of PCC of any description and in any position not otherwise specifically provided for(un-rainforcement ) etc, complete all as specifed and directed.
Excavation in trenches not exceeding 1.5m wide & not Exc 1.5 m in depth and getting out in hard/dense soil.
M&L for cement concrete type D-2 1:4:8 using 40 mm graded stone aggregate in filling foundation , dub base of floor and mass concrete complete all as specifed and directed
M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specifed and directed. .
M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces finshed fair and even in CM 1:4, etc complete all as specifed and directed.
M & L for preparation of new plastered surfaces of walls and applying Two coat of cement based paint over one coat primer etc complete.
S & F Mild steel work of framed brackets of Angles, flats cut to shape ,drilled and countersunk for screw, as in supports for stiffening of fencing, and including bending ,welding angles as necessary similar works confirming to Fe 290 or Gde-E165 and complete all as specifed and directed. .
Fixing chain link fencing including line wires,any mesh size any type of standards, rails straining bolts,etc including provison of binding wire complete all as specified and as directed. Note : Chainlink fencing and line bar shall be measured separately as supplied only
Supply only chain link fencing, MS galvanised of any size and type complete all as specified and as directed.
S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed. (each line wire to be measured)
M&L for preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed
M&L for pre cast Machine pressed cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc size shall be decided and directed by GE
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as spd and directed.
M&L for 75 mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub base flooring of pathway complete all as spd and directed.
M& L for 60mm thick Machine pressed precast paver block M-35 grade laid over sand cushioning after consolidation set and levelled the paver block on proper level with inter locking and size conforming to IS 15658-2006 with grey cement and pigment (LAQUER FINISH) etc complete all as specified and as directed Note: sand cushion will be measured separetely
Supply only sand cusion for paver blocks complete all as specified and as directed.
Removing of demolished material exceeding 500M but not exceeding 1000 M and depositing where directed, complete all as specified and as directed.
Plates (plain or chequered ) channels , square cut or notched (ordinary and counter sunk) forming holes, without any attachement.
S&F for Pre- Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with J Hook screws, complete all as specified and directed.
M&L for Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specifed and directed
M&L for making the grooves 25mm wide and 50mm wide and 50mm deep to 'V' section in existing wall/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves, inserting chajja of PPGI sheet and sealed solidly with a hot mixture of bitumen and clean dry sand in the ration of 1:1 by weight etc complete all as specified and as directed.
Framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tank and similar work conforming to Fe Fe 290 GDS E-165
Preparation of newly plaster surface on walls and applying two coats of Oil Bound Distemper (OBD) over a coat of chalk whiting. Complete all as specified and as directed. Note : Make - Shalimar, Berger, Asian
Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface
M&L 100 mm thick PCC (1:2:4) Type B-2 (using 40 mm gradded stone aggregate) in floors and paving etc,
M&L for Rendering 10 mm thick on fair faces of brickwork or concrete surfaces finshed fair and even in CM 1:4, etc complete all as specifed and directed.
VIJAYA ENTERPRISES
DWARKESH STRUCT-CON
seema enterprises
SAI SAMARTH ENTERPRISES
M/S BHASKAR MANIKRAO PAWAR
M/s KAILASH CHANDRA
M/s S.D Construction Co
RK AND SONS CREATION
Parmatma Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .