PERIODICAL SERVICES AND WELCOME MAINT AND DAY TO DAY PETTY REPAIRS TO SANITARY FITTINGS, PLUMBING AND CARPENTRY WORK IN CERTAIN BLDGS AT 4 AFSB UNDER GE AF GORAKHPUR

Amount

Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc, complete all as specified and directed by Engineer in Charge. Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one, to make the joinery work functional shall be measured and paid for separately as Supply and 'S&F' under respective item of this schedule. Old retrieved item (s) as considered in 'Schedule of Credit' shall become property of the contractor. 1. Rate shall be quoted accordingly against these items, keeping in mind above said provisions. 2. The comlaint shall be attended by the contractor within 12 hours, failing which a panel recovery of Rs 200/ complaint shall be recovered from the contractor dues and no dispute will be intertained at later date

S&F in repair 6mm thick plywood, graded BWR, type BB fixed to timber framework of any thickness complete all as specified and directed.

S&F in repair Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00 mm including necessary beadings and fillets complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples.complete all as specified and directed.

Hacking out old broken glasses any thickness size, quality or description from wooden/metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones. hacking any bldg hight complete all as specified and as directed at site.

S&F in repair 3mm thick Sheet glass, ordinary quality and glazing with oil putty / wooden beads in square n exc 0.5 sq. m in each pane from wooden or steel frames glazed with putty or fixed with wooden beads complete all as specified and as directed at site.

S&F in repair figured glass 4mm thick pin headed type in square n exc 0.50 Sqm, in square or reqd shape each pane including oil putty complete all as specified and directed.

S&F in repairs 150mm, aluminium anodised, barrel tower bolts of extruded section and fix complete all as specified and directed.

S&F in repair 200mm, aluminium anodised, barrel tower bolts of extruded section and fix complete all as specified and directed.

S&F in repair 150 mm Aluminium handles, cast type, anodised etc.complete all as specified and directed.

S&F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed

S&F in repairs 75mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F in repair butt hinges med weight cold rolled MS, size 100 mm long complete all as specified and directed.

Above above but 75 mm long complete all as specified and directed.

S&F in repair brass 100mm size motrice lock, 4 levers ,vertical type.

S&F in repair aluminium (extruded section) door closer hydraulically regulated designation no 3 universal type suitable for 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.

S&F in repair mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed at site.

S&F in repair stainless steel (SS) curtain rod 25 mm dia and including bracket with fancy type end knobs as per sample complete all as specified and directed

S&F in repairs floor door stopper of aluminium alloy body Overall length of cover plate 140 mm and tongue, anodised, with hard drawn steel spring, fixed in floor

Taking down chowkat or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from frames).complete all as specified and as directed at site.

Taking down chowkhats with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description but exc 1 Sqm and not exc 2 Sqm each complete all as specified as directed.

Taking down shutters of any description but exc 2 Sqm each complete all as specified as directed.

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sq.m each complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq.m and n.exc 2sq.m each.complete all as specified and directed.

Taking down and refixing in same opening or easing & adjusting shutters of any description n.exc 1 sq.m each complete all as specified and directed.

Taking down and refixing in same opening or easing & adjusting shutters of any description exc 1 sq.m &n.exc 2sq.m each complete all as specified and directed.

M&L Second class hard wood plain, solid, chowkhats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified as directed.

S&F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

S&F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

M&L for PCC 1:3:6 type C1 as in hold fast blocks and filling in pressed steel frame incl. Necessary form work complete all as specified and as directed at site.

S&F 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003(part I), kilm seasoned and chemically pressure treated complete all as specified and as directed at site.

S&F for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F Flush shutters, 30mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified as directed.

S&F in repair Prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination in pelmet boxes,cup board shutters etc, rebated or flat edged fixed in repairs complete all as specified as directed.

S&F Factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified as directed.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solven cement for stiles and plain colour PVC sheets for top rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted ihn th MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solven cement, as per specification & drawing complete all as specified as directed.

Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer of any description exc 10 cm width or girth complete all as specified and as directed at site.

Preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide of any description exc 10 cm width or girth complete all as specified and as directed at site.

S&F in repairs steel window handles with nuts & bolts or with screws complete all as specified and as directed by Engineer in Charge.

S&F in repair steel window peg stay all as directed complete all as specified and as directed by Engineer in Charge.

S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long all as specified.

S&F in repair stainless steel steel plate rack of minimum size 970X770X230mm of standard quality, fixed to wall with wooden gutties and screws complete all as specified and directed.

S&F in repair Anodised Aluminium Snap Grid (size of grid 605x605mm) frame work for false ceiling & Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified.& 4mm thick non asbestos fibre cement building board fixed or laid/inserted to aluminium framed work complete all as specified and directed.all as specified

Petty repair to leaking bib cock, pillar cock, stop cock, angle valve , gate valve any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pllar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water supply Repair to leaking flushing cistern low/high level, incl adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water supply available upto water taps incl attending the complaints of no water supply.repair to PVC bend, pipe etc . ( Rates are deems to be including replacement washers (hot/cold) ,, flush pipe,GI Nipple,union,Socket,Reducer Socket,bend,Elbow,Reducer Elbow ,Tee,brass spindle, flush syphon, flush handle, pata screws etc) complete all as specified. Notes:-1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. 1.. Rate shall be quoted accordingly, keeping in mind above said provisions. 2. The complaint shall be attended by the contractor within 12 hours from the lodge of complaint, failing which a panel recovery 200/ complaint shall be recovered from the contractors dues.

S&F in repairs 15 mm bore bib tap, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs " flushing cistern kit" for complete set to fitted inside as per reqd for cistern functional complete all as specified and directed.

S&F in repairs 15 mm bore bib tap,cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

ditto as above but of 20mm bore complete all as specified and directed.

S&F in repairs 15 mm bore angle valves, cast copper alloy fancy type chromium plated, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix in repairs 15 mm bore angle cock (Two -in-way) brass chromium plated fancy type, screwed for iron pipe fixed in repairs all as specified and directed. Make- Essco or Jaquar

S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore center hole single lever basin mixer without pop up waste assembly with 10 mm dia 450 mm long braided hoses connection pipe and provision for pop-up Make:- (Jaquar Cat Part No.:- OPP-15051BPM) or equivalent complete all as specified.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed. Complete all as specified and directed. Make- Essco or Jaquar

S&F in repair 32mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

ditto above but 40mm dia complete all as specified and directed.

S & F in repair 32mm Dia and 60 to 75 cm long PVC waste pipe with fly nut, coupling for sinks/urinals or wash basins etc.

S&F in repair Grating doom 125mm dia of PTMT (minimum wt 40grms) complete all as specified and directed.

S&F in repairs 15mm PTMT Bib tap standard of any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs angle valves, 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms

S&F in repairs 15mm Ball valves, high pressures of PTMT, withepoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) complete all as specified and directed.

ditto above but size 20mm dia and Minimum wt (for 20mm -210gms) complete all as specified and directed.

S&F in repair white PVC cover for rotational moulded polyethylene water storage tanks 500 ltr capacity, complet all as specified and directed.

S&F in repair white PVC cover for rotational moulded polyethylene water storage tanks 1000 ltr capacity, complet all as specified and directed.

S&F in repair PVC seat cover for EWC of white colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.Make-Parriware/Hindware/ Cera

S&F in repair flush pipe (PVC) for low level flushing cistern including joining to WC complete all as specified and as directed by Engineer in Charge.

S&F in repairs PVC syphon with handle complete for low level flushing cistern complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC polyplast float valve for flush cistern tank complete all as specified and directed by Engr-in-charge.

S&F in repair SS jet spray for water closet with suitable SS flexible pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore steel water tubing medium grade galvanised for fixed to walls, floors, roof ceiling etc including thread, soluvent and taking up or down steel tubing with connectors etc complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised for fixed to walls, floors, roof ceiling etc including thread, soluvent and taking up or down steel tubing with connectors etc complete all as specified and directed.

S&F in repairs brass CP shower rose with arms 75 mm size fixed to pipe all as in repairs specified and directed.

S&F in repairs 20 mm dia tubular towel rail brass cromium plated, D type, 60cm long between flanges including one pair of brackets all as specified and directed.

S&F in repair stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm complete all as directed . Make- Nirali or Kobra

S&F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and as directed at site.

S&F in repair CP bottle trap 32/40mm dia for WHB having minimum water seal 25mm complete all as specified and as directed.

S&F in repairs Two way Angle cock with wall flange of size 15mm bore Make :- (Cera Cat Part No- F2002211) or equivalent complete all as specified

Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Ditto above but 600mm long complete all as specified and directed.

S&F in repair PVC waste pipe flexible type suitable for couplings 32mm & 40mm dia 600mm long complete all as specified and as directed by Engineer in Charge.

M&L for replacement of MS brackets for WHB/sink/flushing cistern fixed in repairs incl taking down old brackets and making good damaged surfaces to match with the existing etc complete all as specified and as directed by Engineer in Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .

S&F 110mm bore PVC (SWR) bends provided with access door all as specified & directed .

S&F PVC (SWR) Junction single ,(single T) equal or un equal (any radius) 100/110mm complete all specified.

S&F PVC (SWR) P/S trap 125/110 mm,setting and jointing with solvent cement

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed at site.

S&F PVC (SWR) Junction single ,(single T) equal or un equal (any radius) 75mm complete all specified.

S&F in repairs vitreous China squatting pan, "Orrissa" pattern, size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in cement concrete bedding1 : 2 : 4, Type B-1, using 20 mm graded crushed stone aggregate minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder complete all as specified and directed

S&F in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps , waste but including brackets as in repair, complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed.

S&F in repair Health faucet with 1 meter long easy flexible tube in chrome finish and wall hook with NRV( Back flow preventer) (Jaquar Cat Part No-ALD-CHR-573) or equivalen

S&F in repair SS Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed at site.

S&F in repair Stainless Toilet paper Roll holder complete all as spd.(Make- Jaquar Cat No- ACN-CHR-1153S or Marc

S&F PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cm Make - Prayag /Shakti

S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long all as specified.

S&F in repair 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high desity plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres all as specified and directed

S&F in repair 1000 ltr capacity rotational mounded polythylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high desity plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed.

M&L Petty repair to existing steel window /Rolling Shutters, Pressed steel frame, Rat tails spring, Steel Almirah, Mortise lock fitted in steel Almirah and fixing wire mesh on steel windows by welding in situation and in any floor and including hinges 100 mm medium weight to chowkhats after taking down door/window shutter and refixing in position and making functional,repair /screwing of CGI/Prepainted sheets (Welding rod welding machine, small fittings such as window handle, hinges ,Screws etc will be provided by the contractor) removing the steel window shutters from the frame and re-fixing after making serviceable complete in 4 AFSB Varanasi area complete all as specified and directed by Engineer in Charge. Notes 1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as "S&F" under respective item of this schedule. 2. Contractor shall provide minimum one welder in a week including all necessary T&P. Additional workers can be engaged if nature of work required to be completed within fix time frame as desired by the GE. Rate shall be quoted accordingly, keeping in mind above said provisions. 3. Wherever material is fixed as "S&F" under respective item of this Sch, the payment for complaint under this item shall not be paid. 4..The comlaint shall be attended by the contractor within 12 hours, failing which a panel recovery of Rs 200/ complaint shall be recovered from the contractor dues and no dispute will be intertained at later date

Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces,with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions (WPC will be measured and paid separately), upto double storey finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even smooth without using extra cement complete all as specified and directed

M&L for rendering 5 mm thick cement mortar 1:3 as in ceiling, finished fair and even smooth without using extra cement complete all as specified and directed

Supply only integral liquid water proofing compound complete all as specified and directed. Make :- Dr Fixit Pidiproof LW+ or Ceco

M&L for preparation of new plastered surfaces and applying two coats of Oil Bound Distemper over a coat of primer 1mm thick wall care putty after complete all as specified and directed

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint,white or tinted (colour & shade as approved by GE),over one coat of primer 1mm thick wall care putty after up to three stories,complete all as specified and directed.

M&L for preparation new plastered surfaces of any description , including cornices and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for applying two coat of Oil bound distemper over 1mm wall care putty on ceiling after complete preparation on new plastered surfaces of ceiling.

M&L for preparation old decorated surfaces of any description, including cornices and applying one coat of white wash on walls complete all as specified and as directed.

All as per item No. 116 here in above but on ceiling surfaces complete all as specified and as directed.

M&L for preparing of old decorated surfaces and applying one coat of cement based paint on walls complete all as specified and as directed.

M&L for preparing of old decorated surfaces and applying two coat of cement based paint on walls complete all as specified and as directed.

M&L washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying one coat of oil bound distemper white or tinted with roller. Complete all as specified and as directed.

M&L washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying one coat of oil bound distemper white or tinted with roller over 1mm thick wall care putty. Complete all as specified and as directed.

M&L for preparing of old decorated surfaces and applying one coat of oil bound distemper on ceiling surface,Complete all as specified and as directed.

M&L for preparing of old decorated surfaces and applying one coat of oil bound distemper on ceiling surface over 1mm thick wall care putty complete all as specified and as directed.

M&L for preparing of old decorated surfaces and applying two coats of oil bound distemper on walls over 1mm thick wall care putty. complete all as specified and as directed.

M&L washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying two coats of oil bound distemper on ceiling surfaces over 1mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed .

M&L for complete removal of existing treatment on wall/roof projections for by scrapping with mechanical sander (having mechanical vaccume mechanism) with sanding pad applying one coat of100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489.2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Comany Depot Tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over a coat of 1mm thick wall care putty . Note:- Primer and emulsion to be carried out through air less spray machine (Mechanical means). Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed at site.

M&L for Non - skid coioured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) set complete all as specified and as specified and directed

S&F Glazed ceramic coloured tiles 350x250x7mm /450x350x7mm thick in skirting dados risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10 mm thick cement plaster in cm 1:3 complete all as specified as directed..

M&L Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement mortar 1:4 bedding complete all as specified and directed

M&L Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, as skirting etc. set and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:3 complete all as specified and directed

Repair/easing/ readjusting of aluminium door/window shutters by taking down shutters from frame and dismentling members of shutters like, glass, rails and styles by necessary cutting, grinding of members etc and refixing of same including rubber gasket ,hinges , handle, screws etc complete all as specified and directed.

M&L anodised aluminium doors with frame size 101.6X44.45X 2 mm thick and shutter aluminium anodised and top rail 47.62 x 44.45 x 1.5 and style 47.50X 44.50 X 1.50 mm,lock rail 83.5X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm incl necessary aluminium jointing cleats,glazing cleats,rubber packing anodised aluminium shape beading, screws etc with panelling in two parts with 4 mm thick aluminum composite board in lower panel and 5mm thick tinted/plain glass in panels incl all fittings, MS 4 lever mortice lock, floor door spring and all fittings& fixture complete all as spesified and directed

M&L anodised sliding type window with frame size 60X40X2.00 mm thick and shutter with section bearing bottom 52x18X1.50, top 39.4 x17.7 x1.5mm and sides 39.4 x 17.7 x 1.5mm (suitable for moving over two track over top of frame work, top and side section of size 61.6x31.75x1.5mm and bearing bottom track of size 61.6x31.75x1.5mm incl necessary aluminium jointing cleats,glazing cleats,rubber packing anodised aluminium snape beading, screws etc with 5mm thick tinted/plain glass in panels incl all fitting & fixture complete all as spesified and directed.

M&L anodised aluminium grill Wt nexc 3.50 kg per sqm with all fittings& fixture, shape and size as approved complete all as spesified and directed .

S&F in repair 5.5mm thick, sheet/ tinted glass, ordinary quality to be fixed with aluminium beading and rubber gas kit in aluminium frame work as in door/ window/ partition etc all as specified and directed.

M&L for 4mm thick both side aluminium decorative sheet laminated partition panel for fixing in aluminium door shutters by taking out old ply/board from exsting aluminium door shutters complete all as specified and directed

S& F in repair aluminum glazing clips / beading for aluminum door and window

S& F in repair rubber gasket for packing / beading for aluminum door and window

S&F in repairs rubber door seal (Rubber Strips) of size 900mmx 50mmx 2 to 3 mm thick fixed to wooden doors complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and roof and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 50mm thick PCC 1:3:6 type C-2, (using 20mm graded crushed stone aggregate) laid in panels as in plinth protection / flooring etc including making joints & finishing even & smooth without using extra cement as directed all specified.

M&L for PCC 40 mm thick 1:2:4 type B-1(20mm graded stone agg) as in flooring finishing even & smooth with using extra cement etc complete all as specified as directed.

S&F in repair Acrylic sheet for windows panes, doors and fix with oil putty/silicon/etc.complete all as directed.

S&F in repairs 15 mm bore Wall mixer (3-in-1) with connecting legs & wall flange (without hand shower & with overhead shower). Make :- (Jaquar Cat Part No:- FUS -CHR-29281) or equivalent

S&F in repair Angle cock with wall flange size 15mm Make:-Jaquar Cat Part No.:- OPP-15053PM complete all as specified

S&F in repair stainless steel kitchen sink without draining board made of stainless steel 1mm thick,coupling plug, washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantelever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mm X 330 mm X160 mm all as specified and directed. Make- Nirali or Kobra

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed at site.

Tank cleaning and removing all scale and directed etc from tanks and from months of circulating pipes etc, exc 250 and n exc 500 ltr capacity (date of cleaning to be mentioned on PVC tank) complete all as specified and directed.

Tank cleaning and removing all scale and directed etc from tanks and from months of circulating pipes etc, exc 500 and n exc1000 ltr capacity (date of cleaning to be mentioned on PVC tank) complete all as specified and directed.

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 3.00 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed for following :- (a) One Light/fan point controlled by one switch

(b) One 5 Amps socket point controlled by one 5 Amps switch on same board complete all as specified and directed at site.

(c) One 5 Amps socket point controlled by one 5 Amps switch on independent board complete all as specified and directed at site.

(d) One bell point controlled by one 5 Amps bell push complete all as specified and directed at site.

(e) One light point controlled by two 5 Amps two way switch complete all as specified and directed at site.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 3.00wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 2 to 7 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

M&L for point wiring controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including PVC casing caping all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed. (a) One Light/fan point controlled by one switch

(b) One 5 Amps socket point controlled by one 5 Amps switch on same board complete all as specified and directed at site.

(c) One 5 Amps socket point controlled by one 5 Amps switch on independent board complete all as specified and directed at site.

(d) One bell point controlled by one 5 Amps bell push complete all as specified and directed at site.

(e) One light point controlled by two 5 Amps two way switch complete all as specified and directed at site.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including PVC casing caping with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 8 to 12 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

S&F switch piano, flush type 5/6 amp, single pole, two way 240 volt complete all as specified and directed.

S&F socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

S&F socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

S&F switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

S&F bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F only modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

S&F only modular switch single pole 1 way, 1 module, 16 Amp complete all as specified and directed.

S&F only modular socket out let multipurpose 6A -2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F only modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

Supply & fix switch socket combination multipurpose 5 pin 5/15 Amps

S&F only modular bell push pole 1 way, 1 module, 6 Amp complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F fan regulator modular electronic step up type, SP 230 volt complete all as specified and as directed.

S&F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Taking down old unserviceable light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

S&F 10 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. LHEXACP7IN1W010 or equivalent in Bajaj / CG.

S&F 22 watt LED light fitting engineering extruded aluminium batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Phillips ,Product SKU : 919515813187.

S&F 20 watt rechargeable LED light fitting engineering extruded aluminium batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Bajaj 20W CDL LEDZ Inverter Batten 830414

S&F recess mounting LED luminaire round shape 12 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make Philips, Product SKU : 59137

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make: Phillips, Product SKU : WT202W LED 10S CW PSU S3 PC

S&F lamp LED 18 watt, 240 volts complete all as specified and directed. Make : Phillips, Make: ACE Bright

Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 2.50 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 1.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 2.5 sqmm conductor cable, 1 No 1.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 4.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

S&F modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity complete all as specified and directed. Make: Havells, SKU : DHDPHSN020

Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolaters, complete all as specified and as directed. Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

S&F factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

Taking down Unsv MCCb/MCB of any specification complete all as specified and directed at site.

S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SP, 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

Supply only tape insulation, 1100 volts grade 20mm width, 15 mtrs long complete all as specified and directed.

Supply only wire flexible 23/0.0076, twin core twisted, PVC insulated copper stranded conductor complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Note : UNSV fans will be deposited to MES Store by Contractor.

S&F in replacement U/S and broken exhaust fan (air freshener) single phase 230/240 volt AC 300mm sweep with louvers, steel body with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.Make: Havells/Bajaj/CG.

PANDEY TRADERS (BID ID -3349692)

M/S Akhilesh Enterprises (BID ID -3351364)

B.S.S.ENTERPRISES (BID ID -3357751)