Repair and protective works on the approach road to the minor bridge located at Km 02 of the Paigapur Link Road

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, upto 1km transporting to site, spreading, grading to required slope and compacting to meet requirement of 95% of proctor density. As per intregated SOR page 83 item 1.1.2

Supply and Laying of Geo textile (sheet) made of 240 gsm woven multifilament polypropylene yarn for filter material underneath pitch in slopes complete. As per intregated SOR item m107

Providing and laying stone boulder pitching using 25-60 kg stone boulder on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications (MORT&H Specification no 2504)

Excavation of foundation in ordinary soil (Ioam clay or sand) including lift upto 1.50 meter and lead up to 30meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30 meters from the foundation trenches.as per DSR 2.8.1

Cement Concrete with 4cm. gauge approved stone ballast, approved coarse sand and cement in the proportion of 6:3:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work.as per S.I. No. 280

Furnishing & Placing reinforced/ cement concrete in super structure a per drawing and Technical Specification DSR5.3

Mild steel or iorn work in plain work such as in reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shapes as necessary and bending for the proper coppletion of the work and including supply of steel and its wastage etc. and all labour and tools and plants required for proper completion of work Note: the steel shall be bent cold and bends hooks and authorised over lapping shall be measured.

Providing and ercting a ' W ' metal beam crash barrier comprisng of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5 mm spaced 2 m center to center 1.8 m high, 1.1 m below ground/ road level, all steel parts and fitments to be galvanised by hot dip process , all fittings to confirm to IS:1367 and IS:1364 metal beam rail to be fixed on the vertical post with a spacer of channel sction 150x75x5 mm. 330 mm long complete as per clause 810

Finishing walls with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all material, labour and tools & plants etc. required for proper completion of the work. As per DSR13.44.1

Brick Masonry work in 1:4 in substructure complete as per drawing and specification.