PROVN OF DRAINAGE SYSTEM OF HQ SQN ARMD BDE AND OTHER SANCTIONED WORK AT NAMS

Amount

Demolition of Re-inforcement cement concrete any description & in any position not otherwise specifically provided for roof slab,coloum beams,staircase,landing,chajja and footing fdn and similar suspended work with separating , scrapining and cleaning of reinforcement incld all remain portion ordered to not desmantled supporting with MS scofolding and shuttering as directed by Engr-in- charge up to 5.0m span of slab each side of dismantled portion etc including cutting of re- inforcement up to hight of nexc 6.0m complete all as specified and directed. Note- Rate should be quateded incl all suporting shuttering scaffolding removing of debries as per directed by Engr in charge

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete including demolition of old PCC complete all as specified and directed by Engr in charge.

M&L for surface Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed by Engr in charge.

M&L for Excavating in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil complete all as specified and directed by Engr in charge .

M&L for Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm complete all as specified and directed by Engr in charge.

M&L for Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed by Engr in charge.

M&L for Spreading and levelling in layers n-exc 25 cmthick andwell ramming including watering as reqd under floor complete all as specified and directed by Engr in charge.

M&L for brick work with sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

M&L for hardcore s gauge not exc 63 mm depopsited,spread and levelled in layers n exc 15cm thick watered and rammed complete allas specified and directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg.) in sub base of flooring and complete all as specified and directed by Engr in charge.

M&L for providing cement concrete 1:3:6, type C-2, (using40mm graded stone agg) as in sub base 75mm thick complete all as specified and directed by Engr in charge.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base (100mm thick) complete all as specified and directed by Engr in charge.

M&L for PCC (1:3:6, C2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified and directed by Engr in charge.

M&L PCC 1:2:4 type B1 (using 20 mm graded stonr aggregete) as in coping, benching etc complete all as specified and directed by Engr in charge.

M&L for cement conc 1:3:6 type C1 using 20mm graded stone aggregate as in 50 mm thick plinth protection incld at 3m apart made construction joint and filled with bitumen sand mixer as per directed by Engr-in-charge and specified.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for (unreinforced) incld removing, complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick wall or conc surface in cm 1:4 fair finished even and fair all as specified and directed.

M&L for Glazed ceramic tiles coloured in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr in charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate 30 mm thick under tiles complete all as specified and directed by Engr in charge..

M&L for screed bed or bedding layer of mortar15 mm thick in cement 1:4 for lying floor finishes complete all as specified and directed by Engr in charge..

S&F Non Skid Ceramic coloured tiles, 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floor finishes, set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed by Engr in charge.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick,m set, jointed and pointed in neat cement slurry in floor with grey cement and pigment all as specified.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr in charge.

M&L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for providing Plain Cement Concrete (1:3:6) type C2 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and directed by Engr in charge.

M&L for Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete using extra cement including forms, moulds end etc complete all as specified and directed by Engr in charge.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 complete incl demolition of brickwork /stone built in cement mortar etc all as specified and directed.

All as per item 28 here in before but except bricks complete all as specified and directed by Engr in charge.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engr in charge.

M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) including water proofing treatment @3% by weight of cement complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM 1:4 on brick work and finished the surface even and fair (without using extra cement) etc. complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on brick work or concrete surface finish ever and fair (w/o using extra cement) incl taking down old plaster on brick or concrete surface, scrubing down & dispose off debris where directed by EIC, complete all as specified and directed. Note :

Supply only liquid WPC complete all as specified.

Material and labour for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc Complete all as specified.

M&L for preparing newly plastered surfaces of ceilings,wall, soffits & chajja and applying three coats of white wash complete all as spd and directed.

M&L for three coat of white wash incl preparation of new plaster surface of wall complete all as specified and directed.

M&L for one coat of white wash incl preparation of old plaster surface of wall surface complete all as specified and directed.

M&L for two coat of oil bound distemper over one coat of primer on new plasterd surfaces of walls, pillars cornces etc incl prepartion of new plastered surfaces through electrical operated grinder complete all as spd and directed.

M&L for one coat of oil bound distemper on old plasterd surfaces of walls, pillars cornces etc incl prepartion of new plastered surfaces through electrical operated grinder complete all as spd and directed.

M&L for applying two coats of cement base paints over one coat of primer on walls etc, incl preparing new surfaces of walls by brooming down or by steel wire brushing complete all as directed .

M&L for applying one coats of cement base paints on walls etc, including preparing old surfaces of walls by brooming down or by steel wire brushing as directed by EIC.

M&L for reinforced cement concrete1:1.5:3 (nominal mix) (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like up to hight of nexc 6.0m complete all as specified and directed by Engr in charge.

M&L for reinforced cement concrete1:1.5:3 (nominal mix) (20mm graded aggregate) in roof beams, cantilevers, bressummers, lintels over 1.5m span up to hight of nexc 6.0m and complete all as specified and directed by Engr in charge.

Material and labour for providing Reinforced Cement Concrete 1:1.5:3 using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns As in sub base of fdn wall,coping base of drain gratings col etc and the like complete complete all as specified and directed by Engr in charge.

M&L for reinforced cement concrete1:1.5:3 (nominal mix) type (20mm graded aggregate) in Columns, pillars, piers, etc complete all as specified and directed by Engr in charge.

M&L for pre cast RCC (1:2:4) type B1(using 20 mm graded stone aggregate). as in cover slabs and set in cement mortar 1:4 including necessary form work and mouldscomplete all as specified and directed by Engr in charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200mm thick (Horizontal or sloping) up to hight of nexc 6.0m and complete all as specified.

M&L for formwork to sides and soffits of floor or roof beam, lintel beams flat surface etc incl supports, overhangs up to hight of nexc 6.0m etc complete all as specified.

M&L for Use and waste of form work to edges of concrfete flats, slabs etc incl fair finished surface all as specifed and directed.

M&L for Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete all as specified and directed.

M&L for Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified.

ditto all as above item No-54 but nexc 10 mm dia and including in stirrups, spacers and binders and complete all as specified.

M&L for stone sett flooring with stone settsof size 200 to 250mm long 150to 200mm wide an 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 55 weight of cement and stuck flush including dismantling old stone complete all as specified anad directed.

Fixing only stone sett flooring with stone settsof size 200 to 250mm long 150to 200mm wide an 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 55 weight of cement and stuck flush including dismantling old stone complete all as specified anad directed.

M&L for repair to RCC Chajjas, roof projection edges ,hanging part of chajjas, edges of chajjas, RCC papafeets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl neccasary renforcement 8mm to 12mm TMT bars, form work, MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings etc completed all as specified and directed by Engr-in-Charge.

S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.

S&F Mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W, Gde E-250, complete, all as specified and directed by engineer-in-charge.

M&L for one coat of synthetic enamel paint on steel surface incl preparation of old steel surface width or girth exc 10cm all as specified and directed.

S&F mild steel Windows Chajja / wind ties for roof covering including screwing bolts, etc complete all as specified and directed.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275,incld Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. complete all as specified and directed.

All as per ser Item No 63 here-in-before but except sheets, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

All as per ser Item No 65 here-in-before but one coat of synthetic enamel paint over old surface of Wall, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

M&L cement concrete (1:3:6) type C2 (40mm graded stone Agg.) as in embedding of angle iron post all as per specified and directed.

S&F mild steelwork in tubular trusses/rafter purlins etc including special shaped washer etc. compleated using ERW induction butt welded tubes confriming to IS 1161-1779 grade St-240 compleate all as specified and directed.

M&L Rolled section as in main and cross beams, hip and jack rafters, pirlins where connected to common rafter and running rails and guldes for sliding doors. Fixed with anngle cleats or other connecting plates complete all as specified and directed by Engr in charge.

M&L mild steel bolts purpose made, with hexagonal or squate head one end and screwed the other, or screwed end to be fitted with washers and one hexagonal or square nut, exc 25 cm longcomplete all as specified and directed by Engr in charge.

M&L for MS plates (plain or corrugated) forming holes without any attachment complete all as specified and directed by Engr in charge.

S&F Plain, black, mild steel sheeting, 1.25mm thick, in ridges, doors, hips, valley gutters, drip and straight flashings (length and girth as fixed), with welded or soldered provided complete, all as specified and directed by engineer-in-charge.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws and incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.

S&F Pre-painted gaivatume aluminium sheet zinc coatin GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC. complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Mangalore pattern steel sheet 0.47mm thick of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws coplete all as specified and directed by EIC.

S&F 1.25mm thick steel rolling shutter with out ball bearing as seicified including to cover ,an-choring road hasp and staple and including taking down and shope coat primrer erected in position as indicated compleate push pull or manual type all as specified and directed.

Repair only steel rolling shutter with out ball bearing as seicified including to cover ,an-choring road hasp and staple and including taking down and refixing and compleate push pull or manual type all as specified and directed.

S&F in repair 18/19 mm prelaminated particle board, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber/steel frame work incld dismantling of existing complete all as specified and directed.

M&L MS framed work such as grills, gratings with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 complete all as specified and directed by Engr in charge. Note - section of should be get approved from accepting officer before incorporate in the work.

M&L for Reinforced concrete pipes 300 mm dia class NP3 laid and jointed compleate with collers all as per specified and directed

Material and labour for PCC (1:3:6) type C2 using 40 mm graded aggregate bed to drain pipe for 300 mm bore including packing under and hunching against side of pipe after they are laid and tested complete all as specified and directed by Engr in charge.

M&L for preparation of new and previously un-treated steel and iron surfaces of any description, not otherwise described exc 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS rails shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plane colour pvc sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification and drg complete all as specified and directed

S&F steel ventilator with top hing shutters including hinges with steel handles and steel peg stay complete with complete all as directed by EIC.

S&F 100mm Butt hinges, mild steel medium wt, cold rolled and fixed

S&F 150mm Extruded Aluminum alloy, fabricated type, anodised door handle

S&F 200mm long Aluminum anodised barrelTower bolt of extruded section

M&L Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, Length of bolt 300 mm

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor.

M&L Mild steel 300mm long , ordinary rat tail rod pattern springs including roller and roller plate complete

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr in charge.

M&LFormwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr in charge.

S&F steel tubes medium grade galvanisedwith all fittings and fixed complete to wallsand ceiling or laid in floor bore of pipe 15mmdia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4. all as spcd and directed

All as per item No 95 here in before but 20mm dia.

S&F 15mm dia of pipe bib taps, cast copper alloy fancy type and chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipes or for Unions and fixed.

All as per item No 98 here in before but 20mm Dia of pipe

S&F 20mm bore of pipe ball valves high pressure of PTMT with eppoxy coated aluminium rod & high density p[olythene ball screwed for iron pipe and fixed. (Min weight for 20mm - 210 gms),

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, 500 litres capacity complete all as specified and directed by Engr in charge.

S&F waste coupling of PTMT (half or full threaded) 32 mm dia.

S&F PVC waste pipe 32mm dia for wash hand basin complete.

Supply and fixing for Vitreous china wash hand basin white 550 x 400 mm fixed to wall incl MS brackets, plugs, etc complete.

Supply and fixing for Vitreous china water closet orissa pattern size 580x440mm P or S trap incl connection to waste pipe, etc complete.

Supply and fixing for PVC low level flushing cistern 10 lits capacity syphonic action incl PVC ball valve, etc complete.

S&F vitreous china bowl urinal flat back, sizeof 465x355x265mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cistern with brackets, flush pipe grating and union for discharge pipe

S&F of Chromium plated shower roses with arm etcwith or without swivel joints, any size, including fixing to steel pipe or union

S&F Pillar tap fancy type cast copper alloy chromium plated with brass heads set up, screwed down, high pressure with or with out letter hot or cold with long screwed shanks and fly nuts, complete all as directed by EIC.

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (min weight 300gms)

S&F urinal spreader of PTMT any colour for fixing 15mm dia pipe (min weight 60gms)

supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 110 mm dia fixed to walls complete all as specified and directed by Engr in charge.

supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints 75 mm dia fixed to walls complete all as specified and directed by Engr in charge.

supply and fixing PVC (SWR) bends any radius of 110 mm bore.

supply and fixing PVC (SWR) bends any radius of 75 mm bore.

S&F PVC (SWR) floor trap , plain with grating including jointing with solvent cement, diameter of outlet 75mm complete all as specified and directed by Engr in charge.

S&F PVC (SWR) pipe 110 mm dia, single socketed, in any length with rubber ring joints laid in floors/trenches complete all as specified and directed by Engr in charge.

ditto but 75 mm dia complete all as specified and directed by Engr in charge.

Supply and fixing for PVC (SWR) bends , 75 mm dia, with access door

Supply and fixing for PVC (SWR) tee equal or unequal, 110 mm dia, with access door

Supply and fixing for PVC (SWR) cowl, 110mm dia

M&L for Construction soak well 2.4 metres dia (internal) 3 metre effective depth complete as shown on drgs no CEJZ/STD-301/90 sh 1/4 to 4/4 excavation and earth work in soft/rock soil, disposal of surplus spoil to distance exc 50 mtr & n.exc 100 mtr, lean concrete in foundation PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate, brick wall including honey combing brick work, built in CM 1;4,RCC 1:2:4 type B-1 using 20mm graded crsuhed stone aggregate in RCC bend filling with over burnt brick bats of guage n.exc 80mm around the wall, RCC 1:1-1/2:3 type A-1 using 20mm graded crushed stone aggregate as in RCC sl;ab including reinforcement all as shown on drg and RCC mainhole cover 80mm thick reinforced with 8mm dia MS TMT main bars @ 15cm c/c m and 8mm dia TMT distribution bars @ 15cm c/c. Complete as specified as shown on drg and as directed by EIC.

M&L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed by engineer -in-charge,Make : Asian paint, Sika, Fosroc etc..

M&L for point wiring concealed type with PVC insulated (unsheathed ) cable 1.5 Sq mm (Nominal area) multi stranded FRLS copper conductor 1100 V grade & continuous earth wire PVC insulated 1.5 Sq mm copper stranded conductor connecting to common earth in PVC conduit not less than 20 mm, sunken box and fixing new 3mm thick hylem sheet top cover,sheet screws (including cutting chases & making good the disturbed surface) one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and directed. Note : The cost of bakellite sheet, sunken boxes is included in the quoted rate)

Supply and fix switch piano flush type single pole one way 230 V, 5 Amps complete all as specified and directed.

Supply and fix Ceiling rose surface polycarbonated, three terminals complete all as specified and directed.

Supply and fix MCBs single pole and neutral (SPN) 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fix MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fix exhaust fan AC 230 volts 250 mm ventil air DX high quality engineering plastic complete with louvers and shutter complete all as specified and directed.

Supply and fix exhaust fan steel body single phase 230 volts, 300 mm sweep with blade, frame & louvers complete all as specified and directed.

Supply and fix sheet metal enclosure for DB's when MCB to be used single double door factory made flush fixed complete with 200 amp rated bus bar 240 volt single phase 4 way complete all as specified and directed.

Supply laying & testing cable in replacement XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) LT 1100 volt grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) LT 1100 volt grade with stranded aluminium conductor of size 6 sqmm 2 core complete all as specified and directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, Pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregated), 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT steels bars @ 100 mm C/C both ways with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc, including testing on completion complete all as specified and as directed. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

B.J.CONSTRUCTION CO

M/s Vijay Construction Co.

ESS KAY BUILDER