Loading
Loading…
Loading…
Tender Value
₹3.9 L
EMD Value
₹7,836
Closing Date
30 Sept 2026, 5:30 pm2d left
AE, HHSD, PW(R) Dte.
CTI More, Benaras Road, Biradingi, Howrah
Supplying and fixing Temporary Roof Shed and allied works at Office of the Executive Engineer under Howrah Highway Division in the District of Howrah during the year 2026-27
2026_WBPWD_5074623_1
WBPWRD/AE/HHSD/eNIT09/2026-27
Open Tender
CIVIL WORKS
Percentage
28 days
Onkarmal Jetia Road
Please refer Tender documents.
6 documents required · 6 mandatory
₹7,836
23 Sept 2026
23 Sept 2026
2 Oct 2026
23 Sept 2026
30 Sept 2026
23 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil | 0.48 | Cum | 261.86 | ₹125.69 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:
1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.48 | Cum | 7,925.64 | ₹3,804.31 |
| 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes | 1,238.5 | Kg | 195.56 | ₹2,42,201.06 |
| 4 | Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/ tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In Charge. (Cost of truss/frame work shall be paid separately).
0.56 mm, Aluminium Colour coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000 mm. | 64.45 | Sqm | 1,183.74 | ₹76,292.04 |
| 5 | Applying priming coat:
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | 38.51 | Sqm | 171.72 | ₹6,612.94 |
| 6 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia | 11.7 | Mtr | 211.72 | ₹2,477.12 |
| 7 | UPVC pipe clip 110 mm | 10 | Each | 23.85 | ₹238.5 |
| 8 | UPVC plain shoe 110 mm | 4 | Each | 74.55 | ₹298.2 |
| 9 | GST @ 18.00 % over basic rate of sl. no. 1 to sl. no. 8 | - | Percentage | 18 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
WBF.pdf
Tender Documents • 1.16 MB
BOQ_5162067.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .