SPL REP TO KITCHEN, BATHROOM INCL ROOF TREATMENT AND VARANDAH TILING AT BLDG NO. P-50 AT RMS UNDER GE (SOUTH) BANGALORE

Amount

Dismantling of old water proofing treatment over roof any type and roof tiling including screed bed, PCC, Mud Phuska etc. and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in 25 mm thick roof padding finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer 10 mm thick in cement mortar (1:4) on floor/roof /Chajjas surfaces mixed with water proofing liquid compound @ 200 ml per bag of cement finished the surfaces even and fair all as specified and as directed. (Note : WPC will be measured and paid seperately)

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for cleaning the plastered/concrete surfaces of roof with wire brushes and applying water proofing treatment as under complete all as specified and as directed.:- (i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make the surface smooth (ii) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (iii) APP modified water proofing memebrane 3mm as per IS 16540/16532-2017 and weighing not less than 3.80 kg per Sqm reinforced polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with aluminium paint @0.10 Ltr per Sqm

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F false ceiling with GI snap grid frame work of size 595mmx595mm in true horizontal level suspended on interlocking metal grid of hot dipped galvanised steel sections (Galvanised @ 170gms/sqm and bottom exposed width prefinished with leaked polyster paint) consisting of main 'T' runners with suitably spaced joints to get required length and of size 38x24x0.3mm spaced at 1200mm centre to centre and cross 'T' of size 24x25x3mm 1200mm long spaced between main 'T' at 600mm center to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24x25x.3mm to be interlocked at middle of the 1200x600mm panel to form grid of 600mmx600mm and wall angle of size 21x21x.3 and laying false ceiling tiles of 4mm thick fiber cement buidling board, non asbestos (minimum weight 4.8kg/sqm) fixed or laid/inserted to GI form work with screws/clips for false ceiling work including, wherever required, cutting/making, opening for services like diffusers, frills, light fittings, fixtures and smoke detectors etc. Main 'T' runners shall be suspended from ceiling using GI slotted cleats of size 25x35x1.6mm fixed to ceiling with 6mm dia and 50m long metal dash fastner, 4mm GI rods with galvanised steel leveling clips spaced at 1200mm centre to centre along main 'T' section (false ceiling system shall be capable to bear distributed load of minimum 15kg/sqm) complete all as specified and directed.

M & L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including cement screed 15mm thick in cement mortar 1:6 etc including dismantling of old existing floor tiles & removal of dabris outside of MOD land etc complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) cut from same shade and size of floor tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including backing coat 10 mm thick rendering in cement mortar 1:4 etc including dismantling of old existing skirting & removal of dabris outside of MOD land etc complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including cement screed 15mm thick in cement mortar 1:6 including dimantling of old existing floor tiles & removal of debris outside of MoD land etc complete all as specified and directed.

S&F coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat 10 mm thick in cement mortar (1:4) including dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado with cement mortar bedding (but not backing) and removal of rubibish out side the MOD land complete all as specified and as directed.

M&L for Granite slab black colour18-20 mm thick including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) including pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dis+B50mantling of existing any type of stone or concrete etc complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including stainless steel waste coupling 40mm complete all as specified and directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but n. exc 4 sqm with shutters (without taking off shutters from the frames) including making good the disturbed surface to match with adjoining surface complete all as specified and directed.

Taking down Chowkhats or frames n exc. 1.5 sq. m with shutters (without taking off shutters from the frames) including making good the disturbed surface to match with adjoining surface complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified & directed.

M & L for Mild steel work for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 etc. complete all as specified & directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M S square tube and fixing in position with hold fast complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

M&L for preparation of new steel and iron work surfaces exc 10 cm width or girth and applying Two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified & directed.

S&F Flush shutters 30 mm thick, factory made, solid core construction, with particle board core and plywood face panels, complete all as specified & directed.

S&F Second class hard wood glazed and skelton shutters 30 mm thick, open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F Second class hardwood plain, solid, straight chowkats and frames, wrought frame rebated on the solid, rounded or chamfered put together with glue pinned at joints with grooves on both sides for fixing panelled shutter and wire mesh door shutter complete all as specified and directed.

M & L for second class hardwood Plain, fillets not exc 3 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S & F Prelaminated particle board 18/ 19 mm thick, interior grade, prelaminated both sides with decorative type fitted with screws confirming to IS 12823-1990 complete all as specified & directed

S&F Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy 200 mm long complete all as specified & directed

S&F Extruded aluminium alloy handles 150 mm size, fabricated type with plate anodized complete all as specified & directed

S&F Aluminium anodized barrel tower bolts 150 mm long of extruded section complete all as specified.

S&F Butt hinges of size 100mm, Mild steel medium weight cold rolled M S fixed Complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in solid block masonry with solid blocks exceeding 10cm in width and setting in cement mortar (1:6) including demolition of old existing damaged .brick work complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar (1:4) on fair face of brick or concrete walls surfaces of finished even and fair complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete wall surfaces finished even and fair and applying two coats of distemper acrylic emulsion over a coat of 1mm thick wall care putty finished to smooth surface all as specified and as directed.

M&L for taking down plaster, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises all as specified and as directed.

M&L for rendering 5mm thick in cement mortar (1:3) on concrete ceiling surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for following items of work all as specified and directed. :- (i) Preparation of newly plastered wall surface (ii) 1 mm thick wall care putty including stopping of nail holes, filling of cracks, etc (iii) Applying two coats of distemper acrylic emulsion over a coat of primer complete. (iv) Cleaning all window panes, floors etc from splashes / droppings

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of self primer including and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L for preparation of new plastered or unplastered ceiling surfaces and applying two coat of distemper Acrylic emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old decorated /painted ceiling surfaces and applying one coat of distemper acrylic emulsion including cleaning splashes of distmeper on floor/joinery etc all as specified and directed.

M&L for preparation of old decorated/painted wall surfaces and applying one coat of distemper Acrylic emulsion including stopping of nail holes, filling of cracks, etc and cleaning all floor window panes from splashes / droppings, all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying two coat of distemper Acrylic emulsion including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed.

M&L for preparation of old decorated surfaces of walls externally and applying one coat of cement based paint including cleaning all window panes from splashes / dropping etc all as specified & directed.

M&L for preparation of old painted steel and iron surfaces of work exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.

M&L for preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint all as specified & directed

M & L for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified & directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all as specified & directed.

S&F Figured glass pin headed type 4 mm thick, glazing with aluminium beading & rubber gasket in square n. exc 0.5sqm in each pane complete all as specified & directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified & directed.

S & F in repair CPVC pipes 25mm outer dia bore Including SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down rusted GI pipe 20 mm dia complete all as specified & directed.

S & F in repairs of CPVC pipes 20mm outer dia all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F 20 mm dia male brass threaded adapter complete all as specified and as directed.

S&F 20 mm dia female brass threaded adapter complete all as specified and as directed.

Dismantling water tanks exc 500 & n exc 1000 litres and removing complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks 1000 ltrs capacity, triple layered (cylinderical vertical with closed top) hoilsted and fixed in position all as specified in SSR Part-I complete all as specified & directed

S&F nipple 25 mm dia bore suitable for HDPE water tank. (Min wt 45 gms) complete all as specified & directed.

S&F CPVC ball valve suitable for CPVC pipe 25mm outer dia bore & fixed complete all as specified & directed.

S&F CPVC Union suitable for CPVC pipe 25mm outer dia complete all as specified & directed.

S&F in repairs Ball valve 25 mm internal dia bore high pressure PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-450gms) complete all as specified & directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white colour including bolts (excluding flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.

S&F in repairs plastic water closet seat cover, White colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specifed and as directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity, white colour with all fittings syphonic action with inlet ball valve and float, handle, bracket PVC bend etc. complete all as specified and directed .

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair vitreous china wash hand basin, white, Oval type size 520 x 450x200mm including one number brass chromium plated waste coupling, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F waste pipe 32mmdia stainless steel for WHB / sink complete all as specified and as directed

S&F in repairs wall mixer 15 mm dia bore brass Chromium plated for mixing hot & cold water screwed down for iron pipe and fixed any type complete all as specified and as directed.

S&F PVC (SWR) floor/Nahani trap, 75mm dia outlet, plain with 100mm dia Stainless steel grating including solvent cement complete all as specified and as directed.

S&F in repairs Pillar taps, tall height fancy type, brass chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S & F in repairs angle valves 15 mm dia nominal bore, bras chromium plated, complete, fixed all as specified and directed.

S&F in repairs PVC connection 15 mm dia 600mm long with PTMT nuts and washer on both sides for hot water complete all as specified and directed.

S&F in repairs Bib tap 15mm fancy type, cast copper alloy Chromium plated screwed down, high pressure, with capstan head, screwed down screwed for iron pipe complete all as specified and directed.

S&F Shower rose 100mm dia, pressure adjustable made of brass chromium plated with shower arm of 190mm Long brass chromium plated fixed on 15mm dia pipe complete all as specified and directed.

S&F in repairs Stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repairs tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified & directed

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC bends any radius 75mm dia complete all as specified and as directed.

S&F PVC bends any radius 110mm dia complete all as specified and as directed.

S&F in reapairs swan neck pillar tap for sink brass,fancy type, chromium plated fixed to 15mm dia pipe complete all as specified & directed

S&F Unbreakable corner Glass shelf 8" semi circular with 2Nos of Stainless steel rail complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. Complete all as specified and as directed.

M&L for Point wiring with PVC FRLSH insulated unsheathed multistranded single core copper conductor cable 1. 5 Sqmm passing through & including suitable size PVC casing capping including 1.6mm thick steel sheet pressed terminal box (surface mounted ) with 2mm thick hylum sheet including 1.5 Sqmm PVC insulated copper conductor earth continuity wire complete for the following all as specified and as directed :-

One light point controlled by one switch

One bell point controlled by one switch

One fan point controlled by one switch

One socket oulet 5Amps on same board with other switches

One socket oulet 5Amps on indepndent board

M&L for Point wiring with PVC FRLSH insulated unsheathed multistranded single core copper conductor cable 4 Sqmm passing through & including suitable size PVC casing capping including 1.6mm thick steel sheet pressed terminal box (surface mounted ) with 2mm thick hylum sheet including 4 Sqmm PVC insulated copper conductor earth continuity wire for socket outlet 15Amps on independent board complete all as specified and as directed.

S & F Switch piano flush type single pole one way 5/6 Amps. complete all as specified and as directed

S & F Socket outlet 5 pin 5/6 Amps flush type multipurpose 230Volts complete all as specified and as directed.

S&F Switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and as directed .

S&F Socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type universal type complete all as specified and as directed.

S & F Switch bell push, flush type single pole one way 5/6 Amps complete all as specified and as directed .

S & F Bell Ding Dong AC 230 Volts, single Pole complete all as specified and as directed.

S&F Fan Regulator step type 120Watts 230Volts complete all as specified and as directed.

S&F ceiling rose surface type 3 terminals to be fixed on PVC block Complete all as specified and as directed.

Supply and fixing surface mounted Mini Mirror light LED batten 2 feet with extruded aluminium housing and robust construction 10 Watts system lumen with all accessories fixed with flexible copper 2 core wire from fitting to ceiling rose complete all as specified and as directed.

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 Watts system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories complete all as specified and as directed.

S&F LED Bulkhead light fitting 10 Watt Environmental friendly, ultra modern, energy saving, surface mounted , decorative oval bulk head edge LED luminarie comprising of high brightness LEDs including connetcion with fllexible copper wire 2 core from fitting ceiling rose/connection point complete all as specified and as directed.

M & L for sub main wiring, surface type with Two run single core 06 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable & one single core of 4mm FRLS PVC insulated drawn through in and including 20 mm dia PVC conduit pipe with accessories including elbow, tee etc., one run of 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly Complete all as specified and as directed. (Note Three run of 6sqmm , one run 4sqmm and one run of PVC conduit altogether measured as one unit)

Taking down ceiling fan of any sweep, dismantling, replacing defective part, overhauling, cleaning, greasing, rewinding, etc and hanging up/fixing back in the original position, connecting up and testing complete all as specified & directed. NOTE: (a) The unit rate quoted shall be deemed to include for minor items viz nuts, bolts split pin and rubber wheel etc. (b) Supply of Capacitor & bearing shall be measured and paid separately under relevant items of this schedule. (c) Rewinding of fan will be measured and paid for separately under relevant item of this schedule.

Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and as directed.

Supply only Bearing No. 6201/6202/6203 suitable for ceiling fan/exhaust fan complete all as specified and as directed.

M & L for removing of burnt out winding wire from ceiling fan of any make and size of 1200 mm to 1400 mm sweep including cleaning of slots etc and rewinding with super enamelled copper winding wire as per existing size/gauge including insulating material, varnishing and drying complete all as specified and as directed.

M&L for spray painting of ceiling fans one coat with synthetic enamel paint using spray gun including cleaning all dust, filling cavities with filler etc complete all as specified and as directed.

Taking down, dismantling of geysers of any type/capacity from site and diposit to AGE E/M store yard & reassembling & reinstallation after repair complete all as specified & directed.

S&F Distribution board Vertical TPN 4 Way, 415 volt double door suitable to fix MCCB 125 Amps capacity as a incomer, IP 54 Protection, complete all as specified and as directed

S & F MCCB 3 Pole, 415 Volts fixed type, 125 Amps with breaking capacity 16 KA Complete all as specified and as directed.

S&F Sheet metal enclosure Distribution board MCB SPN, double door 8 way, with 200 amps bus bar 240 Volt complete all as specified and as directed.

S & F MCB DP 32/40Amps, 230 volts, C curves complete all as specified and as directed.

S & F MCB SP up to 40Amps 240 Volts , C curves, Complete all as specified and as directed.

M & L for Earthing with G I earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground, earth plate not less than 2.25 Metre deep below ground level, with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed .

Taking down old unserviceable XLPE UG Cable form site any size any capacity Complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm x 3.5 core Complete all as specified and as directed.

Srisrinivasaenterprises (BID ID -3283820)

M/S POTHIRAJ AND CO (BID ID -3292405)

SCION ENTERPRISES (BID ID -3289448)

SRI KRISHNA ENTERPRISES (BID ID -3289661)