SPL REPAIR OF BATHROOM/TOILET AND REWIRING WITH E/M AND B/R FIXTURE OF BLDG NO P-1(A) (OR LINE), P-11 (MT OFFICE) AND BLDG NO P-2(B) (OR MESS),BARBER SHOP AND WASHERMAN SHOP AND SEWAGE LINE AT CAMS UNDER GE (SOUTH ), DELHI

Amount

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each including making good disturbed portion of wall/plastered surfaces in cement mortar 1:4, complete all as specified & directed.

Taking down door/window/ventilator's chowkhat or frame with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each including making good disturbed portion of wall/plastered surfaces in cement mortar 1:4, complete all as specified & directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame - 125 x 60mm, including filling hollow of frame with plain cement concrete(1:3:6 ) complete all as specified & directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame - 105 x 60mm, including filling hollow of frame with plain cement concrete(1:3:6 ) complete all as specified & directed.

S&F factory made 2nd class hard wood 35 mm thick glazed and Skelton shutters open rebated and prepared to receive glass / gauze etc. ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified & directed.

S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified & directed..

S&F factory made solid panel coloured PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and bottom rail either side and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing, complete all as specified & directed.

S&F solid coloured PVC doors frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge & fixing in opening as per specification & drg in SSR 2020 Part II complete all as specified & directed.

S&F 100 mm size butt hinges medium weight stainless steel complete all as specified & directed.

M&L for factory made PVC cupboard frame of size 75mmx40mm with 4 mm wall thickness made out of extruded 4 mm thick plain/prelam PVC sheet of density 600 Kg/cum manufactured by an ISO 9001-2015 certified company, reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 02 Nos. of 150 mm long brackets of 10 mm x 10mm MS square tubes. The door frame shall be fixed to wall using 65/100 mm long MS screws to be provided for each vertical member and minimum of 02 Nos. of screw to be provided horizontal member etc. complete all as specified and directed.

M&L for factory made PVC flush type shutter of 18mm thickness consisting of panel of Hollow PVC profile of 12 mm thickness consisting of MS frame made out of MS tube of 16 gauge and size of 10 mmx 10mm metred all around the hollow profile section and lipped with 8 mm (4mmx2mm) thick and 12 mm wide on styles and rails using solvent cement. The inner panel shall consist of 4 mm plain/prelam PVC sheet of density 600 Kg/cum manufactured by an ISO 9001-2015 certified company on the front side and 2 mm plain/prelam PVC sheet using solvent cement on both side of the panel. The thickness of the shutter is edge lipped by 18 mm width x 1mm thick PVC sheet using solvent cement etc. including necessary fittings, locking and fixing arrangement i.e. piano hinges, locking and fixing arrangement etc. complete all as specified and directed and as per manufacturer's specification and drawing complete all as specified & directed.

S&F 18/19mm thick prelaminated particle board, exterior grade , prelaminated both side with decorative choice lamination fixed with screws to timber frame complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to wooden doors or steel section windows complete all as specified and as directed .

S&F Aluminium anodised barrel tower bolts, 150 mm long , of extruded section and fixed complete all as specified & directed.

S&F aluminium handles , 150 mm size, Fabricated type , complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section , fixing bolts and sliding bolts of extruded section complete all as specified & directed.

S&F door closer aluminium (die cast) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified & directed.

S&F brass mortise lock vertical type 6 lever of size 100 mm to 120 mm long with handle including taking down old mortise lock complete all as specified & directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified & directed.

S&F powder coated aluminium frame for partitions, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

S&F aluminium powder coated door shutter, aluminium section weighing not less then 0.55 Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing, aluminium anodized snap beading, screw etc. including the following in each shutter, complete all as specified and as directed. (a) 150mm handle - 02 Nos. (b) Stainless steel hinges - 100mm - 03 Nos. (c) Mortise lock in built 3 lever-01 Nos. (d) Tower bolt 200mm long- 02 Nos. ( Note: Glass & particle board shall be paid measured and separately.)

S&F 4.8 mm thick tinted glass fixed to aluminium frame work with rubber beading gasket complete all as specified and directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminium framing complete all as specified and directed.

S&F fabricated aluminium window/ Ventilators with powder coated anodized aluminium frame of section 63.5mm x 38.10mm x 1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminium anodized “D “ handle, hinges, peg stays, tower bolts, etc. including jointing cleats for fixing builder's hardware fittings & 4mm thick frosted glass and fixed with aluminium wire staples including necessary fittings/ fixture /aluminium snap beads complete all as specified and directed. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass and all fittings/ fixtures deemed to be included in the above quoted rates and no extra shall be paid.

S&F fabricated aluminium window/ Ventilators with powder coated anodized aluminium frame of section 63.5mm x 38.10mm x 1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminium anodized “D “ handle, hinges, peg stays, tower bolts, etc. including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/ fixture /aluminium snap beads complete all as specified and directed. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of SS wire mesh and all fittings/ fixtures deemed to be included in the above quoted rates and no extra shall be paid.

M&L powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter Skelton covering half of span of opening ) including provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with steel wire staples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and directed. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be including in the above quoted rates and no extra shall be paid.

M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repair for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparation of new Steel surfaces of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over & including a coat of red oxide/ zinc chromate primer complete all as specified and directed.

M&L for preparation of new untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over & including one coat of wooden primer complete all as specified and directed.

S&F hasp and staple,75mm size safety type, stainless steel including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F rolled mild steel in Fe 410-W(Gde-E-250) quality-A, framed work as in doors or gates of angle or other section with gusset plates, etc., complete, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed.

Demolition Cement concrete (unreinforced)Concrete of any description and in any position not otherwise specifically provided and including removal of debris outside the MOD land, complete all as specified and directed.

M&L for 100mm thick Cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in floor finishes and pavings complete all as specified and directed.

M&L for non Skid ceramic tiles 7 to 8mm thick coloured (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for glazed coloured , ceramic tiles in vertical surface of size 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for glazed coloured , ceramic tiles in vertical surface of size 300X200X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles premium quality as in floor etc. complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for edge moulding to 20 mm thick Granite stone any description of counters vanities etc., including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

M&L for 15 mm thick Screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified and as directed .

M&L for 10 mm thick rendering on brick/concrete surfaces in cement mortar (1:4) as screeds in back of tiles in dado complete all as specified and directed.

S&F machine cut kota stone slab flooring 20-25 mm thick laid over & including 20 mm thick cement screed base in cement mortar 1: 6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed .

M&L for mirror polishing on existing marble/ granite/ kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

M&L for ATT Along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed.

M&L for cement concrete type C2, 1:3:6 ( using 40mm graded stone aggregate) for plinth protection etc. complete all as specified and directed.

M&L for Rubber moulded Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick , set , jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying floor finishes in floors , path / hard standing etc. with grey cement and pigment (Coloured Tiles) complete all as specified and as directed .

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Glossy finished pre-polished coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness , M-35 grade with grey cement and pigments complete all as specified and directed.

Demolition of RCC other than ground floor i.e. beams , water tank, staircases , landing chajjas and similar suspended work complete all as specified and directed.

M&L for RCC 1:2: 4, type B1 (using 20 mm graded stone aggregate) as in Slabs supported on walls landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for RCC 1:2: 4, type B1 (using 20 mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L for use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, surface rough finished complete all as specified and directed.

M&L for use & waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, surface rough finished complete all as specified and as directed.

M&L for use & waste of Formwork to chajja through and similar items including edges, surface rough finished complete all as specified and as directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperture 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc. of slabs, chajjas, fins, facias, parapets, Lintels, columns and beams etc. complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs. including finishes as existing complete all as specified & directed .

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperture 50mm, total thickness of gunite exc. 25mm but n.exc 40mm (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc. of slabs, chajjas, fins, facias, parapets, Lintels, columns and beams etc. complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs. including finishes as existing complete all as specified & directed .

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc. on walls and ceiling complete all as specified & directed .

M&L for 15 mm thick rendering (internal surfaces) with ready mix plaster ( as per manufacturer's instructions ) on bricks or concrete surfaces , finished even and smooth without using extra cement ,complete all as specified and directed . Make : Birla Aerocon / Ultra radiplast / ACC Acoplast.

M&L for 15 mm thick rendering (external surfaces) with ready mix plaster ( as per manufacturer's instructions ) on bricks or concrete surfaces , finished even and fair without using extra cement complete all as specified and directed. Make : Birla Aerocon / Ultra radiplast / ACC Acoplast.

M&L for 10mm thick rendering on ceiling with ready mix plaster ( as per manufacturer's instructions ) on concrete surfaces , finished even and smooth without using extra cement, complete all as specified and directed. Make : Birla Aerocon / Ultra radiplast / ACC Acoplast.

M&L for preparation of new wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) including scaffolding for upto 4 storey building, complete all as specified and directed.

M& L for complete removal of existing treatment of old treated surface of walls and applying two coats of distemper oil emulsion over & including a coat of water based primer & wall care putty to achieve even, uniform and smooth surface complete all as specified and directed.

M&L for preparing old plastered surfaces and applying a coat of white wash on wall complete all as specified and as directed.

M&L for preparing old plastered surfaces and applying a coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of newly plaster surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L applying two coats of cement base paint, white or tinted on old wall plastered surface including preparation of surface complete all as specified and directed.

M&L for of new plastered surface and applying two coats of distemper oil emulsion over & including a coat of water based primer & wall care putty to achieve even, uniform and smooth surface complete all as specified and directed.

M&L for preparing of old surfaces of ceiling and applying two coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of new surfaces of ceiling and applying two coat of distemper oil emulsion over & including one coat of primer complete all as specified and directed.

S&F Ist quality counter sunk vitreous china wash hand basin of size 550x400x140mm , ivory, including waste fitting complete all as specified and directed.

S&F in repair Ist quality wash hand basin vitreous China flat back 550x450mm size white, including PVC waste coupling 32mm size, pair of brackets of mild steel 35 x 35 x 6mm size complete all as specified and directed .

S&F in repair Ist quality Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), white , with grating and union for discharge pipe including waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for dismantling of floor of toilet with WC seat & taken out the cinder from sunken portion of WC, taking down of cement plaster of any thickness & description of wall & floor, provide 25mmdia GI pipe medium grade spout projecting at least 150mm beyond outer face of wall 15mm thick plaster in cement mortar 1:4 with WPC both on floor & wall, then apply Epoxy Resin Coating polymer(water proofing coating for sunken portion )both on floor as well on wall sunken portion filled with new graded cinder & including 50mm thick floor in PCC 1:2:4 (using 20mm graded stone aggregate), floor area not exc. 3.50 Sqm complete all as specified and directed.

S&F in repair Ist quality vitreous china squatting pan (Orissa pattern) long pan fixed size 580x440mm white with integral footrest with `P' or `S' trap complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair Ist quality vitreous china wash down water closet pan EWC (pedestal pattern ) with P or S type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repair , 15 mm bore, Wash hand basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connection for 15 mm bore pipe, 450mm long complete all as specified and directed.

S&F in repair 32/ 40 mm bore and 750mm long PVC Waste pipe suitable for WHB /Sink/ urinal complete all as specified and directed .

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair, PVC valve less , syphonic action type flushing cisterns 10 litres capacity , low level , white, with inlet ball valves , float and handle including brackets and PVC flush pipe 32 mm dia for low level complete all as specified and directed.

S&F in repairs 15mm brass chromium plated fancy type bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed.

S&F in repair 15 mm brass angle stop valves (fancy type), cast copper alloy , chromium plated, screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and directed.

S&F in repair brass Stop valves 15 mm bore fancy type, CP with long shank & cup (concealed type), cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair brass CP swivel shower rose of size 125mm with including arm & fixing to steel pipes complete all as specified and directed.

S& F in repairs grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed.

S&F in repairs CP Health Faucet ABS body (Push type) including wall hook and 1.0 mtr SS Braided rubber hose pipe complete all as specified and directed.

S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knob with all fittings complete all as specified and directed.

S&F Corner glass shelf 8-10 mm thick 300X300 with 'D' / F type brackets complete all as specified and directed.

S&F in repairs CP Urinal spreaders for 15mm bore pipe, complete all as specified and directed.

S&F Aluminium alloy door seal having rubber strips in bottom, fit to door size complete all as specified and directed.

M&L for cutting chases for concealed water tubing and making good with cement mortar 1:3, cutting not exc 10 cm in girth in brick wall complete all as specified and directed .

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and as directed .

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and as directed .

Refixing old steel tubing of 15 mm bore and connections in new or old position ( wall , ceiling , floor etc. ) complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position ( wall , ceiling , floor etc. ) complete all as specified and directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.

Taking down cast iron pipes including fittings by burning out lead joints etc. to facilitate dismantling old serviceable fittings/pipes laid in trenches, floors or fixed to walls including earth work, demolition of PCC / Brick work complete all as specified and directed, for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F cast iron sand cast soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls including making good to match with existing surfaces complete all as specified and directed, for the following sizes of pipes:-

a) 100 mm bore of pipe.

b) 75 mm bore of pipe.

S&F in repair, cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified and directed, for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F in repairs CI Bends (any radius ), diminishing pieces or tapers of 100 mm dia fitted with oval access door complete all as specified and directed.

S&F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted without oval access door complete all as specified and directed.

S&F in repairs Cast iron branch pieces, Tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100 mm bore with cement joints, fitted with oval access doors complete all as specified and directed.

S&F in repairs Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore with cement joints, fitted with oval access doors complete all as specified and directed.

S&F 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm complete all as specified and directed.

S&F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes complete all as specified and directed.

S&F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for75mm bore pipes complete all as specified and directed.

M&L for Extra overcast iron pipe and fittings for lead joints on provided in lieu of cement joints for 100 mm dia CI Pipes complete all as specified and directed.

M&L for Extra overcast iron pipe and fittings for lead joints on provided in lieu of cement joints for 75mm dia CI Pipes complete all as specified and directed.

S&F in repair PVC(SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints, fixed to wall with and including MS flat iron clamp 25x 3 mm complete all as specified and directed.

S&F in repairs PVC(SWR) pipes 75mm bore size single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC(SWR) bends any radius, of 110mm bore size complete all as specified and directed .

S&F in repair PVC(SWR) bends any radius, with threaded type door eye of 110mm bore size complete all as specified and directed .

S&F in repair PVC(SWR) bends any radius, of 75mm bore size complete all as specified and directed .

S&F PVC(SWR) bends any radius, with threaded type door eye of 75mm bore size complete all as specified and directed .

Dismantling water tanks exc 500 but n.exc 1000 Litres capacity complete all as specified and directed..

Dismantling water tanks exc 1000 but n.exc 2000 Litres capacity complete all as specified and directed.

S&F rotational moulded water storage tank 500 Litre capacity triple layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.

S&F rotational moulded water storage tank 1000 Litre capacity triple layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.

S&F rotational moulded water storage tank 2000 Litre capacity triple layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.

S&F in repairs 20 mm ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F gun metal globe or gate valve for 15 mm bore pipe with iron wheel had screwed both ends for iron pipe complete all as specified and directed.

S&F gun metal globe or gate valve for 20 mm bore pipe with iron wheel had screwed both ends for iron pipe complete all as specified and directed.

S&F galvanised iron tank nipple 15mm bore suitable for HDPE water tank complete all as specified and directed.

S&F stainless steel plate rack 304 grade made of 1mm thick stainless steel sheet of size 775 mm x 900 mm x 250mm consisting of 3 shelf for bowls and one shelf for keeping six nos. of big utensil and seven nos. of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre complete all as specified and directed.

S&F in repair Stainless steel 304 grade sink made out of 1 mm thick sheet of overall size 495x420mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos.) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and directed.

S&F in repair Stainless steel 304 grade sink with drainage board made out of 1 mm thick sheet of overall size 915x460mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos.) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and directed.

M&L for cutting of shrubs/bushes and small plants/vegetation including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg. and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and directed.

Demolition of brick work built in cement mortar including quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work in cement mortar (1:6) sub class 'B' bricks, using old size bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified and directed.

Demolition of existing brick tiles or terracing tiles, single layer on roofs, bedded, jointed and pointed in any mortar, complete all as specified and directed.

Demolition of mud in roof, any thickness, including plastering and leeping including necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing demolished material to a distance exc. 1.5 Km but n.exc 5 Km complete all as specified & directed.

M&L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface complete all as specified and directed.

M&L for PCC type B1(1:2:4) (using 20 mm graded stone aggregate) thickness 40 mm (average thickness) for concrete as on roof slope, complete all as specified and directed.

M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed Note:-Water proofing compound shall be measured and paid separately.

M&L for water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.250 Kg/ Sqm and providing 3 mm thick(minimum), APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non-woven polyester fabric weighing not less than 150 gm /Sqm all as per detailed specifications applying a coat of blown grade hot bitumen 85/25 @ 1.20 Kg / Sqm, complete all as specified and directed.

M&L for preparation of new surface of APP membrane sheet and applying two coats of aluminium paint complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed..

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching, roof kerbs and similar work rounded or chamfered including necessary formwork complete all as specified and directed.

Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St-240 complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw complete all as specified and directed.

M&L for brick work using old size bricks of sub class B, built in cement mortar (1:4), straight or curved on plan, exc 6 metre mean radius complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished fair & even without using extra cement, complete all as specified and directed.

Excavation in trenches in soft/loose soil, not exc 1.5m wide & n exc 1.5m in depth as in foundation , manholes etc. n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out complete all as specified & directed.

Demolition and breaking up drain pipes (salt glazed stoneware/ACC/RCC) 150 mm dia, set in cement mortar, including removal of waste material upto 500 metre distance at the place notified by the Engineer-in Charge complete all as specified and directed .

M&L for salt glazed stoneware drain pipes 150 mm bore, laid in trenches and jointed in cement mortar (1:4) and tested complete all as specified and directed. Make:-PERFECT(Jabalpur)/ BURN(Jabalpur)/ DEVRAJ(Ghaziabad).

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against sides of 150 mm bore pipes after they are laid and tested, complete all as specified and directed.

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all as specified and directed.

Removal of excavated surplus soil to a distance not exc 50 metre where directed by Engineer-in-Charge at a level not exc 1.5m above or below the starting point complete all as specified and directed.

S&F in repairs SFRC manhole cover size 1200mm X 600mm x 70 mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Make:- M/s PS Concrete/ M/s KK Manhole or equivalent as approved by GE” Note: - Contractor will provide manufacturer test certificate of SFRC cover & frame.

M&L for salt glazed stone ware gully trap, square or round mouthed, 150mm x 150 mm size, shape as required, and jointing with old connection and pipes including dismantling and taking out of old GT complete all as specified and directed.

M&L Extra for forming fair furnished drain or channels 30 cm inner girth in cement concrete using cement including forming moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for PCC(1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete, drain etc. complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, rounded or chamfered on edges including use and waste of form work complete all as specified and directed.

Supply only integral Water Proofing Compound complete all as specified and directed.

M&L for precast reinforcement cement concrete1:2:4 type B-1, (using 20mm graded stone aggregate) in precast drain cover set in CM 1:4 including necessary formwork etc. , complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping columns, hooking end with binding with and including mild for wire not less than 0.9mm dia complete all as specified and as directed.

Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete Fitting such as switch, ceiling roses, pendants, socket, regulators , all type light Fitting, security light, bell, etc. complete all as specified and directed.

M&L for following point wiring complete with single core multi strand copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including concealed PVC conduit medium grade and modular sunken pressed steel terminal box 2 mm thick required size including mudular plate and modular flush box in different module with all accessories including 1.5 Sqmm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and as directed". Note :- The rate is inclusive cutting/chasing and making good disturbed surface with cement mortar 1:3 and same surface finish with the adjoining surface of disturbed area with OBD/Colour wash/white wash

One light /fan/Bell point/security light controlled by one way switch

One 3 pin socket outlet 5 amps on same board

One 3 pin socket outlet 5 amps point independent board

M&L for point wiring for One 3 pin socket outlet, 15 amps on independent board complete with single core multistrand copper conductor 2.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & including concealed PVC conduit medium grade and modular sunken pressed steel terminal box 2mm thick of required size including modular cover plates and modular flush box in different module with all accessories including 2.5sqmm single core multistranded copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and as directed . Note :- The rate is inclusive cutting/chasing and making good disturbed surface with cement mortar 1:3 and same surface finish with the adjoining surface of disturbed area with OBD/Colour wash/white wash .

S&F Switch Modular type switch, 6A 1- way SP switch with finger proof terminal complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered type 6A socket, complete all as specified and directed.

S&F Switch Modular type switch, 16 A 1- way SP switch with finger proof terminal complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered type 16 A socket, complete all as specified and directed.

S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and making good surface as original by plastering and whitewash/ colour/ distemper etc. complete all as specified & directed.

"S&F surface mounting LED Integrated Aluminium Batten luminaries Polycarbonate co-extrusion tube fot not less than 18 Watt LED light housing Fixture should have minimum system lumen of 2000lm and minimum efficiency at system level >=115lumens/Watt,life of fixture 50k Hrs,CCT 4000-6500k with same lumens/w CRI>80, PF>0.95 THD<10% @ 240V AC an operating voltage range of 140-270V including all connection up to ceiling rose complete all as specified and as directed".

"S & F surface mounting LED Integrated Aluminum Batten luminaries Polycarbonate co-extrusion tube for Not less than 09 Watt LED light housing. Fixture should have minimum system lumen of 1000 lm & minimun efficiency at system level >=115lumens/Watt, life of fixture 50k Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240V AC, an operating voltage range of 140-270V including all connection up to ceiling rose complete all as specified and as directed".

S&F 10 Watt LED Bulk Head capable delivering 1150 lumen having luminous efficiency not less than 115 lumen/watt starting time <.5 s CRI>80%, PF>0.9,IP-65, CCT 6500K input voltage range 140-270V input frequency 50-60Hz complete all as specified and directed .

S&F 20 watt security light high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficiency of 2600 Lumen/Watt integral SMPS based constant current electronic LED driver with THD<15% surge voltage protection and other safety tests as per IS:15885( part-2/sec-13),IP 66 protection high efficiency polycarbonate cover with integrated lens housed in pressure die cast aluminium alloy heat sink for effective thermal management sturdiness excellent corrosion resistance separate optical and control gear compartment & top opening for easy maintenance suitable for side entry wall mounting with & including bracket arm OD 35mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible copper conductor cable of appropriate size including 1.5m long bracket having 40mm diameter light grade GI pipe including GI clamp nuts, bolts & washers complete all as specified and directed .

"Supply, Installation, testing and commissioning 1200mm sweep BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade , 30 cm long down rod, 2 Nos canopies, shackle kit, safety rope, copper winding , power factor not less than 0.9, service value (CMM/W) minimun 6.85, Air delivery not less than 220 CMM , 350 RPM (tolerance as per IS:374-2019), THD less than 10% with electronic regulator unit for speed control and all remaining accessories including safety pin, nuts, bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V,50Hz, single phase, AC supply complete all as specified and as directed". Make : Orient ( Hector Remote)/OG (Energion Groove/ Bajaj (Energos 26)

S&F in replacement of VTPN DB 4 Way double door vertical type for fixing MCCB 4Pole upto 250 Amps as incomer and MCBs as outgoing with metal door and IP 43 protection and connecting, complete all as specified and directed .

S&F in replacement of MCCB TPN 'C' curve 160 Amps, 415 Volts with 16 KA including electrical connection with incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and directed.

Supply and fix in replacement of SPN 08 Way double door metallic DB conforming to IEC 61439-3 suitable for flush / surface mounting having 100 A copper busbar fully shrouded neutral bar earth bar wire set & cable ties for cable management pre fitted sheet etc. Having IK 09 & IP 43 protection complete all as specified and directed .

Supply and fix in replacement of SPN 12 Way double door metallic DB conforming to IEC 61439-3 suitable for flush / surface mounting having 100 A copper busbar fully shrouded neutral bar earth bar wire set & cable ties for cable management pre fitted sheet etc. having IK 09 & IP 43 protection complete all as specified and directed.

S&F in replacement MCB SPN 'B' curve 63 Amps 240 Volts , 10 KA complete all as specified and directed.

S&F in replacement MCB SP 'B' curve 06 to 32 Amps 240 Volts 10 KA complete all as specified and directed.

S&F in replacement MCB SP 'B' curve 63 Amps 240 Volts 10 KA complete all as specified and directed

S &F in replacement for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering all as shown in drg and connected to earth test point including testing complete all as specified and directed. Note: i) Quoted rate will deemed to be included for cost of adequate quantity of charcoal dust, common salt and Testing commissioning including checking of earth continuity and earth result . ii) Cost of Main earthing lead & protection pipe from earth electrode to test point upto 7.5 metre will deemed to be included in quoted rates. iii) On testing after completion if the desired earth resistance is not obtained, the earthing will be redone without any extra cost.

M&L for Earth continuity conductor or main earthing lead fixed on wall/ceiling in batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

Taking down unserviceable Submain wiring of any size complete and making good disturbed surface complete all as specified and directed.

S&F submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated sheathed FR-LSH cable multistranded copper conductor 1100 volts grade IS-694 marked , drawn in and including PVC concealed conduit of size 25mm dia with complete all as specified and directed. Note : (i) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (ii) Two runs of cable 6 Sqmm with 01 earth wire 6 Sqmm & conduit shall be measured as one unit. (ilia) The rates are inclusive of Cutting / chasing and making good to disturbed surface with cement mortar 1: 3 and same surface finishes with the adjoining surface of disturbed area with OBD/Colour wash /white wash

S&F 16A, 30mA Earth leakage circuit breaker 1P+N C16 ELCB complete with two way sheet Metal Enclosure Distribution board for geyser complete all as specified and as directed.

Supply & fixing of water storage heater, 5 star, Glass lined enamel coated incoloy heating element ,Digital temperature display, Feather touch buttons, Shock resistant injection moulded ABS body, IPX4 waterproof technology, Tank design is suitable to withstand 8 bar pressure (Geyser) of capacity 25 litre, , AC, electric, 230 volt, complete , 3 core lead, Plug top, safety valve, including electric and water connection and making good to disturbed surface including taking down existing water storage heater complete all as specified and directed. (Note : Existing geyser to be taken down from wall and deposit to the MES Yard for custody )

S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25 litres capacity of geyser as hot and cold water connection complete all as specified and directed.

S&F Exhaust Fan, Metal body, copper wound 300 mm Sweep, 900RPM, heavy duty with louver and connecting up with replacement of cable two core flexible cable of size 0.50 Sqmm from ceiling rose / connection to fan complete including taking down of old exhaust fan and depositing to MES store yard all as specified and directed.

S&F Exhaust Fan, Metal body, copper wound 450 mm Sweep, 900RPM, heavy duty with louver, and connecting up with replacement of cable two core flexible cable of size 0.50 Sqmm from ceiling rose / connection to fan complete including taking down of old exhaust fan and depositing to MES store yard all as specified and directed.

M&L for excavation of existing LT cable of any size and taking it out from the cable loop including incomer electrical connection of 4P MCCB of VTPN with suitable size of thimble complete with returning filling and make good of excavated surface / floor complete all as specified and directed .

Taking down unserviceable under ground cable up to 50 Sqmm size complete all as specified and directed.

Supply & laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core complete all as specified and as directed .

Supply & laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and as directed.

M&L for Material and labour for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying of cable in trenches complete all as specified and directed. Note:- Punned thickness shall be measured for payment purpose

Supply and laying Bricks common burnt clay building old size bricks sub class B designation 75, complete all as specified and directed.

Supply and laying High density polyethylene(HDPE) pipes of pressure rating 6kgf/Sqcm (IS marked) and laid in trenches/under roads/ in drains/fixed to poles/walls of size 50 mm dia complete all as specified and directed.

P R Constructions

verma enterprises

M/S Chhavi Constructions Co

M/S MSD & Associate

Chaudhary Constructions

kailash chawla

YP INFRA