Supply Engineering Installation Testing and Commissioning of augmentation 500KVA D TF with 1000KVA and allied materials at MAMC Agroha

Amount

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work with inclosure box (HSR 23.22.1) 23.22.1.8 TRIPLE POLE MCCB 600 to 800 Amp, 50 KA

SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings (HSR 23.22.8) 23.22.8.5 400 amp 415 volts

Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. (HSR 23.23.6) 23.23.6.1 MS perforated cable tray painted with powder coating 100 X 50 X2 mm

23.23.6.2 MS perforated cable tray painted with powder coating 200 X 50 X 2 mm

23.23.6.3 MS perforated cable tray painted with powder coating 375 X 50 X 2 mm

Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as requiredincluding erection of the same on existing cable tray duly pained as required includind with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. (HSR 23.23.7) 23.23.7.2 GI cable tray cover, suitable for cable tray 200 X 50 X2 mm

23.23.7.3 GI cable tray cover, suitable for cable tray 375 X 50 X 2 mm

Supply and erection of suitable compression type brass cable glands for underground Cable :(HSR.24.2.7) 24.2.7.5 120 sqmm to 185 sqmm Cable 3 to 3.5 Core

24.2.7.6 240 sqmm to 185 sqmm Cable 3 to 3.5 Core

24.2.7.7 300 sqm to 400 sqmm cable 3 to 3.5 core

Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work .(HSR 24.2.8) 24.2.8.9 95 sqmm

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.(HSR 24.5.2) 24.5.2.5 DWC/HDPE pipe 120/105 mm outer dial inner dia

24.5.2. 6 DWC/HDPE pipe 145/123 mm outer dial inner dia

24.5.2. 7 DWC/HDPE pipe 180/150 mm outer dial inner dia

Supply and erection of underground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:- (NS) LT XLPE power cable (armoured) 150 sqmm 3.5 core Aluminum conforming to IS 7098 (Part-1) : 2021, IS:8130- 2013, IEC 60502, IS: 5831-1984 standard with latest amendment thereof

Supply and erection of underground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:- (NS) LT XLPE power cable (armoured) 240 sqmm 3.5 core Aluminum conforming to IS 7098 (Part-1) : 2021, IS:8130- 2013, IEC 60502, IS: 5831-1984 standard with latest amendment thereof

Supply and erection of underground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:- (NS) LT XLPE power cable (armoured) 300 sqmm 3.5 core Aluminum conforming to IS 7098 (Part-1) : 2021, IS:8130- 2013, IEC 60502, IS: 5831-1984 standard with latest amendment thereof

S/E of underground cable, loose in existing pipe or trenches complete with necessary connections:- (NS) LT XLPE power cable (armoured) 120 sqmm 3.5 core Aluminum conforming to IS 7098 (Part-1) : 2021, IS:8130- 2013, IEC 60502, IS: 5831-1984 standard with latest amendment thereof

S/E of underground cable, loose in existing pipe or trenches complete with necessary connections:- (NS) LT XLPE power cable (armoured) 150 sqmm 3.5 core Aluminum conforming to IS 7098 (Part-1) : 2021, IS:8130- 2013, IEC 60502, IS: 5831-1984 standard with latest amendment thereof

S/E of underground cable, loose in existing pipe or trenches complete with necessary connections:- (NS) LT XLPE power cable (armoured) 240 sqmm 3.5 core Aluminum conforming to IS 7098 (Part-1) : 2021, IS:8130- 2013, IEC 60502, IS: 5831-1984 standard with latest amendment thereof

S/E of underground cable, loose in existing pipe or trenches complete with necessary connections:- (NS) LT XLPE power cable (armoured) 300 sqmm 3.5 core Aluminum conforming to IS 7098 (Part-1) : 2021, IS:8130- 2013, IEC 60502, IS: 5831-1984 standard with latest amendment thereof

Distribution Transformer Supply and erection ,testing and commissioning of transformer 1000KVA 11 /0.433 KV 3 phase 50 cycle copper wound outdoor type confirming IS 1180-(Latest updated versions) Level -2 upto the entire satisfaction of the engineer of the work as per detail specification given as under with 3year warranty:- Make Kirloskar/Crompton/Schnider specified as below (NS) Output / capacity- 1000KVA as per detail specification given in DNIT ANX-A, Sr. No. 26

LT POWER FACTOR PANEL:- Supply,installation ,testing & commissioning of cubical type panel dust & vermin proof.free standing floor mounting made out of 2MM thick CRCA sheet with 75mmx40mmx6mm chanel iron base frame painted with stove enamelled power coated paint L.T. automatic power factor control panel 360 KVAR capacity suitable for automatic operation & control of power factor within the set limits suitable for operation on 3 phase 4 wire 50 Hz 400/440 volt s A.C. supply. including the cost of following items. (NS) as per detail specification given in DNIT ANX-A, Sr. No. 27

Supply and erection of outdoor type end termination jointing box heat shrinkable type suitable for 95 Sqmm 3 core 11 K.V HT. XLPE cable with epoxy cast bushing including making necessary connection with all labour and material required to complete the job all in respect upto the entire satisfaation of the Engineer-in -charge of the work. Make: Denson/3M/ (NS)

Supply and erection of fencing for safety precaution made out with the help of 50mm x 50mm x6mm angle iron(The distance shall not be max. 950mm Horizental and 25mm Vertical between to angle ) ,MS flate 50mm x 6mm ,(The distance shall not be max 800 mm vertical between to flate) MS jali wire gauge 3.5 mm duly painted with red enameled paint i/c one coat of red oxide .The fencing angle shall be embeded in ground with C:C mixture at least 90 cm in ground level including all labour and material required to complete the job at site. (NS)

Supply and laying crushed stone agreegate 25 mm gauge around the D/TF (NS)

Supply,intallation, testing and commissioning of ACB 1600 amp. 4 pole 50 KA of L&T C- POWER, SR18G MDO /HAVELLS/L&T / INDO ASIAN make in existing panel microprocessor based with L.S.I.G. protection manualy draw out type manually operated complete with under voltage trip & shunt-trip. ACB should have alarm for temp. rise 75 centigrate with LED indication so that ACB self trip more than at 95 centigrate and ICS =ICU =ICW 100% for 1 Second. Suitable for operation on 400/440 volts 3 phase , 4 wire 50Hz AC supply with 4 Nos or 6 Nos.. (NC+No) auxilary contacts and comprising of :- (NS) as per detail specification given in DNIT ANX-A, Sr. No. 31

S/E, testing and commissioning of indoor cubical type, dust and verman proof LT pannel free standing floor mounting made outof 16G. M.S. sheet with channel size 50 x 50 x 6mm iron base frame painted with strong synthetic light gray enamel paint suitable for operation on 3 phase 4 wire 50 cycles 400/440 volts A.C. supply including the cost of following items (NS) as per detail specification given in DNIT ANX-A, Sr. No. 32

S/E, testing and commissioning of indoor cubical type, dust and verman proof LT pannel free standing floor mounting made outof 16G. M.S. sheet with channel size 50 x 50 x 6mm iron base frame painted with strong synthetic light gray enamel paint suitable for operation on 3 phase 4 wire 50 cycles 400/440 volts A.C. supply including the cost of following items (NS) as per detail specification given in DNIT ANX-A, Sr. No. 33

Janta Electric Store

JS Power Solutions Private Limited