Special Repair of Chhitpalgarh Se Noorpur sampark marg in FY-2026-27-1881-2

Construction of granular sub-base grading-I by providing coarse graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD specification clause 401.including labour cess, royality.but excluding GST

Providing, laying, spreading and compacting stone aggregates of 63-45 mm sizes to water bound macadam G-2 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density for Grading 2 as per MORD Specification No. 405.including labour cess, royality .but excluding GST

Providing, laying, spreading and compacting stone aggregates of 53.22.4 mm sizes to water bound macadam G-3 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density for Grading 3 as per MORD Specification No. 405(3).including labour cess, royality. but excluding GST

Brick edging on both sides of the road of first brick class M-150. 8 cm wide and 12 cm deep laid with mud mortar including labour & supply of bricks finished to required template and in proper alignment and also including dressing & ramming the excavated earth as directed by the engineer-in charge of the work including material, labour and T & P etc for Proper completion of the work.including labour cess, royality. but excluding GST.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per MORD Sepcification 502.including labour cess, royality.but excluding GST

Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.as per MORD Sepcification 503.including cost of all material & labour cess, royality.but excluding GST

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN capacity, finished to required level and grades to followed by seal coat.as per MORD Sepcification 508.including cost of all material & labour cess, royality.but excluding GST

Providing and laying seal coat Type C sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall .including cost of all materails labour etc as per MORD Sepcification 510.including cost of all material & labour cess, royality. but excluding GST

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per technical specification clause 301.5 .including cost of all material & labour cess. but excluding GST

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m and lead upto 30 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300-2 as per technical specification clause 301.5.but excluding GST