Loading
Loading…
Loading…
Tender Value
₹2.8 Cr
EMD Value
₹5.6 L
Closing Date
13 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
GS
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N crores or V, whichever is lower; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of total contractual payments in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work for this tender is "Any Civil Engineering work consisting of PCC or RCC or Brick work etc".
2.The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by Public listed company having average annual turnover of Rs.500.0 Crores and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by Public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates, for all payments received and copy of final/last bill paid by company in support of above work experience certificate. And If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to subcontractor by a Govt. organisation or public listed company as defined in Note for Item l0.l part-I of GCC, the same shall be considered for the purpose of fulfillment of credentials. (Authority: Railway Board's letter no. No. 2020/CE- UCT/3E/GCC/Policy, Dtd.30.12.2021).
23 conditions · 1 needing a document upload
A . Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. 1 . The details of the works completed by the tenderer during the last three years to be filled in Annexure-I. 2. The details of Plants and Machinery with the tenderer to be filled in Annexure- II. 3. Details of Personnel and Organization of the Tenderer to be filled in Annexure-III. 4 . Details of Works presently on hand of the Tenderer to be filled in Annexure- IV. 5. The details regarding Association of Railway Officer s with the tenderer to be filled in Annexure- V. 6 . List of the Arbitration cases of the Tenderer during last Five years to be filled in Annexure-VI. 7 . List of the Court cases of the Tenderer during last Five years to be filled in Annexure- VII. 8 . NEFT MANDATE FORM. All Payments to the agency including the refund of the Earnest Money of the unsuccessful bidder preferably will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure-VIII.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII, IX, XI. Annexure-V, V(A), VI, VI A & VI B of GCC-2022 respectively. These Annexure are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days. Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderers.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Open e-tender for the work of "Provision of Improvement of the Surface of existing Island Platform Nos. (4-5) & (6-7) including sitting benches,water booths and platform Toilets for Upgradation of stations at Malda station Eastern Railway".
1-GSU-MLDT-26-27
1-GSU-MLDT-26-27
Open
Works - General
8 Months
Maldah, West Bengal
₹0
₹5.6 L
13 Jul 2026
23 Jun 2026
29 Jun 2026
73 items across 2 schedules · ₹3,32,49,217.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 750 | 227.18 | 1,70,385 |
| 2 | Every additional lead of 50m or part thereof beyond1st 50 m upto 9 such additional lead | cum- lead | 750 | 49.47 | 37,102.5 |
| 3 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 250 | 8,340.85 | 20,85,212.5 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 25 | 7,878.5 | 1,96,962.5 |
| 5 | 1:1 1/2:3 (1 cement : 1 1/2 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 35 | 10,357.55 | 3,62,514.25 |
| 6 | Concrete of M20 grade with minimum cement content of 270 kg /cum | cum | 25 | 9,212.6 | 2,30,315 |
| 7 | Concrete of M25 grade with minimum cement content of 300 kg /cum | cum | 10 | 9,439.05 | 94,390.5 |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 500 | 9,045.75 | 45,22,875 |
| 9 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 15 | 10,585.9 | 1,58,788.5 |
| 10 | Extra for providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages, excluding cost of hangers. | Sqm | 20 | 485.05 | 9,701 |
| 11 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 2500 | 107.85 | 2,69,625 |
| 12 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 10 | 9,504.75 | 95,047.5 |
| 13 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 20 | 733.5 | 14,670 |
| 14 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 9 | 7,370.65 | 66,335.85 |
| 15 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 15 | 9,344.35 | 1,40,165.25 |
| 16 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 50 | 905.05 | 45,252.5 |
| 17 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 25 | 1,123.8 | 28,095 |
| 18 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | Sqm | 25 | 104.8 | 2,620 |
| 19 | Area of slab upto 0.50 sqm | Sqm | 25 | 3,414.8 | 85,370 |
| 20 | Area of slab over 0.50 sqm | Sqm | 25 | 3,078.4 | 76,960 |
| 21 | Area of slab upto 0.50 sqm | Sqm | 50 | 5,413.5 | 2,70,675 |
| 22 | Area of slab over 0.50 sqm | Sqm | 50 | 5,136.3 | 2,56,815 |
| 23 | Area of slab upto 0.50 sqm | Sqm | 120 | 4,170.7 | 5,00,484 |
| 24 | Area of slab over 0.50 sqm | Sqm | 120 | 3,848.7 | 4,61,844 |
| 25 | Marble work | Metre | 50 | 298.6 | 14,930 |
| 26 | Granite work | Metre | 50 | 510.95 | 25,547.5 |
| 27 | Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble | Sqm | 55 | 3,190.3 | 1,75,466.5 |
| 28 | Granite of any colour and shade | Sqm | 95 | 3,617.55 | 3,43,667.25 |
| 29 | Granite Stone of approved shade | Sqm | 10 | 4,051.85 | 40,518.5 |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 150 | 1,267.95 | 1,90,192.5 |
| 31 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 15 | 2,241.8 | 33,627 |
| 32 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 250 | 238.35 | 59,587.5 |
| 33 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 75 | 570.95 | 42,821.25 |
| 34 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 60 | 3,720.75 | 2,23,245 |
| 35 | Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 meter) | Sqm | 15 | 9,155.2 | 1,37,328 |
| 36 | Using flats 30x6 mm for diagonal braces and central cross piece | Sqm | 20 | 5,563.75 | 1,11,275 |
| 37 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 350 | 772.4 | 2,70,340 |
| 38 | Medium shade pigment using 50% white cement 50% Grey cement | Sqm | 1400 | 1,328.35 | 18,59,690 |
| 39 | Dark shade pigment using ordinary cement | Sqm | 2000 | 1,119.5 | 22,39,000 |
| 40 | 25 mm thick | Sqm | 450 | 1,948.25 | 8,76,712.5 |
| 41 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 75 | 2,354.7 | 1,76,602.5 |
| 42 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 30 | 1,096.55 | 32,896.5 |
| 43 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 120 | 1,112.7 | 1,33,524 |
| 44 | Size of Tile 600 x 600 mm | Sqm | 65 | 1,464.85 | 95,215.25 |
| 45 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 2800 | 3,186.7 | 89,22,760 |
| 46 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 800 | 4,481.3 | 35,85,040 |
| 47 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red | Sqm | 200 | 3,071.05 | 6,14,210 |
| 48 | 110 mm diameter | Metre | 150 | 377.4 | 56,610 |
| 49 | 110x110x110 mm | Each | 20 | 234.15 | 4,683 |
| 50 | 110 mm bend | Each | 50 | 150.35 | 7,517.5 |
| 51 | 1:4 (1 cement: 4 coarse sand) | Sqm | 50 | 357.35 | 17,867.5 |
| 52 | 1:3 (1 cement : 3 fine sand) | Sqm | 15 | 300.45 | 4,506.75 |
| 53 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 150 | 185.65 | 27,847.5 |
| 54 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 1500 | 116.9 | 1,75,350 |
| 55 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 220 | 2,434.25 | 5,35,535 |
| 56 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 15 | 3,551.25 | 53,268.75 |
| 57 | In cement mortar | cum | 25 | 2,060.2 | 51,505 |
| 58 | For thickness of tiles 10 mm to 25 mm | Sqm | 2200 | 73.4 | 1,61,480 |
| 59 | 15 mm to 40 mm nominal bore | Metre | 50 | 149.8 | 7,490 |
| 60 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. | Sqm | 700 | 2,017.6 | 14,12,320 |
| 61 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 5 | 12,071.75 | 60,358.75 |
| 62 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Each | 5 | 9,256.45 | 46,282.25 |
| 63 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 5 | 1,879.2 | 9,396 |
| 64 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 5 | 1,683.35 | 8,416.75 |
| 65 | Orissa pattern W.C. pan of size 580x440 mm | Each | 5 | 3,169.05 | 15,845.25 |
| 66 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. | Each | 5 | 2,784.95 | 13,924.75 |
| 67 | 10 litre capacity - White | Each | 10 | 1,190.65 | 11,906.5 |
| 68 | 32 mm dia | Each | 5 | 119.55 | 597.75 |
| 69 | 15 mm dia nominal bore | Metre | 15 | 366.4 | 5,496 |
| 70 | 20 mm dia nominal bore | Metre | 12 | 437.3 | 5,247.6 |
| 71 | 25 mm dia nominal bore | Metre | 12 | 551.7 | 6,620.4 |
| 72 | 40 mm dia nominal bore | Metre | 12 | 811.9 | 9,742.8 |
| Schedule total | ₹3,30,96,218.4 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022.pdf
ATTACHMENT
correctionSlip_1.pdf
ATTACHMENT
CorrectionSlip-2.pdf
ATTACHMENT
correctionSlip-3.pdf
ATTACHMENT
correctionSlip-4.pdf
ATTACHMENT
correctionSlip-5.pdf
ATTACHMENT
correctionSlip-6.pdf
ATTACHMENT
correctionSlip-7.pdf
ATTACHMENT
correctionSlip-9.pdf
ATTACHMENT
CorrectionSlip-10.pdf
ATTACHMENT
Correctionslip-11.pdf
ATTACHMENT
FormV.pdf
ATTACHMENT
FormVA.pdf
ATTACHMENT
FormVIB.pdf
ATTACHMENT
Commercialcompliance.pdf
ATTACHMENT
TechnicalCompliance.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
Instruction Regarding Cable Cutting
ATTACHMENT
Bid Document
ATTACHMENT
Tele_Cir_17-2013regardingcablecut.pdf
ATTACHMENT
TenderDocumentMaldaPlatform-4567_.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .