Rep to sanitary fittings plastering sunken floor internal water supply and misc works at central instititute saddleback Stn Offrs Mess Arjun mess, Lagger Complex Flaf Staff House K2Z and GSA under AGE B/R I area at GE (N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary,stone /brick/ RRwalling built in cement and sand mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

All as per Item No. 7 (here-in-befoe) but n.exc 1.5 Sqm

Taking down shutter exceeding 1.00 Sqm but not exc 2 Sqm etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour in repair rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid, jointed & pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

M & L in repairs non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M & L in repair glazed ceramic coloured tiles of size 350 X 250 mm X 7 mm/450x350x7mm thick on vertical surfaces as in dados laid over and including a backing coat of 10 mm thick in cement and sand mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L in repair joint free Non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 Sqm but not exceeding 0.36 sqm in floor etc set of jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles over 15 cm screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

All as per item No 14 (here-in-before) but on skirting and 10 mm thick backing coat in cement and sand mortar (1:4)

Material and labour in repair 16 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing & pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour in repair machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L in repair brick work with fly ash bricks straight or curved on plan exc 6m mean radius, built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

S&F in repair pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F in repair pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge by Engineer-in-Charge. Makes : Petite series Cat Part No CO287 (S) / 88 (P) incl seat cover Cat Part No E8309 of Parryware or equivalent make as mentioned in list of make in Appendix `C'

S&F in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / including flushing cistern etc complete all as specified and directed by Engineer-in-Charge Makes : Cat Part No CO117 of Parryware or equivalent make as mentioned in list of make in Appendix `C'

S&F in repairs wash hand basin vitreous China white , flat back or angle type of size 550 X 400 mm including pillar tap 15mm dia CP of make Jaguar Cat Part No CO471 (CHT) Indus series of parryware or equivalent make as mentioned in list of makes in Appendix `C', waste chain and plug and porcelain stopper , waste pipe, a pair of brackets, or erecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion paint over a coat of chalk whitening primer on wall etc complete all as specified and directed by Engineer-in-Charge

M&L for Complete removal of existing treatment on plastered and applying 3 mm thick wall care putty (birla) including crack filling and applying two of Oil bound distemper (OBD) etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of cement paint on wall over a coat of primer on wall etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing old painted surfaces of wall and applying one coat of cement based paint etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old plastered surfaces of wall and applying two coats of cement paint on wall etc complete all as specified and directed by Engineer-in-Charge

M&L for prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old wall surfaces of any description & applying one coat of acrylic (antifungal) exterior grade paint on wall/roof etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old surafces of walls etc and applying one coat of white wash etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 32 (here-in-before) but one coat of white wash on ceiling

M & L for preparation of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

All as per item No 34 (here-in-before) but on steel surfaces

Supply and fix in repair second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 35 mm thick factory made plain framed, panelled shutter (two panel) of second class hard wood with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 35 mm thick factory made glazed and skeleton shutters of second class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

S&F in repair solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet etc complete all as specified and directed by Engineer-in-Charge

S&F in repair factory Made Solid PVC Moulded Door Shutter,with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face in the frame at site etc complete all as specified and directed by Engineer-in-Charge

Material and labour in repairs second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A(Oriental series) of MARC or equivalent make as mentioned in list of makes in Appendix `C'

Supply and fixing in repairs stop cock cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No MOR 1320 (Oriental Series) of Marc or equivalent make as mentioned in list of makes in Appendix `C'

S&F in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1010 (Oriental series) of MARC or equivalent make as mentioned in list of makes in Appendix `C'

S&F in repairs, shower rose with shower arm from Cat part No MARC MSR 1050 (Shower & MOR1260 shower Arm of MARC or equivalent make as mentioned in list of makes in Appendix `C'

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples as fixed etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and directed.

All as per item No 55 (here-in-before) but 1000 ltrs.

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in cement and sand mortar (1:4). Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC (1:5:10) type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC (1:4:8) type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC viterous china squatting pan 580x440mm with integral footrests/pedastal pan incl seat cover, white, area of WC exc 1.50 Sqm but nexc 5.00 sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs health faucet (ABS Body) with 1 meter long easy flex tube in chrome finish & wall hook etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No ALD-CHR-585 of Jaquare or equivalent makes as mentioned in list of make in Appendix `C'

Supply and fixing in repairs tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No U-0911 of Marc or equivalent makes as mentioned in list of make in Appendix `C'

M&L machined pressed precast concrete interlocking paver block glossy with grey cement and pagment, any shpae and size confirming to IS 15658-2006 of 60mm thickness M-35 grade over a stone dust cushion of 50mm thick etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10 mm thick on fair faces of brick/concrete surfaces in cement and sand mortar (1:4) finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof etc complete all as specified and directed by Engineer-in-Charge

S/F in repairs vitreous china wash basin oval size 520X450mm white excluding taps waste, chain and plug and procelain stopper nut all as directed completely fixed on granite counter fixed etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples as fixed etc complete all as specified and directed by Engineer-in-Charge

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed. Make :- Sleek essence series of Hindware or Cat part No E8303 Of Parryware or equivalent make in list of makes mentioned in Appendix `C' etc complte all as specified and directed by Engineer-in-Charge

M & L for for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M & L for Plastering 10 mm in cement and sand mortar (1:3) using 100% course sand on roof mixed with & including M & L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M & L for for providing water proofing treatment on roofs as per latest zonal specification , as per manufecturer's instructions and as specified after taking down/out as existing at site etc complete all as specified and directed by Engineer-in-Charge (a) M & L for Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.25 ltrs/sqmts and allow to dry. (b) M & L for Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts with white gravel/mineral finished by thermofusion process.

M&L mild steel tubular work as in posts, purlins rafter etc.using ERW or induction butt welded tubes etc fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

M&L for Fe 410-W (Gde-250) quality a roof truss (framed), trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel for flat section) including distance pieces, cleats in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs aluminium extruded section door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed by Engineer-in-Charge

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified and directed by Engineer-in-Charge. Note : If broken or unserviceable glass / aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items of this BOQ

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass / aluminium wire mesh / floor spring / concealed lock is replaced same will be paid separately under relevant items.

S&F in repars concealed star lock powder coated for aluminium window fixed as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium fully glazed door shutters side hung type / sliding type with top channel and roller and accessary, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately under relevant item of this BOQ

S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.) etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately under relevant item of this BOQ

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sq. m in each pane etc complete all as specified and directed by Engineer-in-Charge

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturers instruction etc complete all as specified and directed by Engineer-in-Charge

Taking down eaves gutters and rainwater pipes any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories etc complete all as specified and directed by Engineer-in-Charge

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed by Engineer-in-Charge

S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed by Engineer-in-Charge

Taking up and down 15 mm bore GI tubing and connection including cleaning for re-fixing or removing to store etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 85 (here-in-before) but 20 mm bore etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 85 (here-in-before) but 25 mm or 32 mm bore etc complete all as specified and directed by Engineer-in-Charge

S & F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 88 (here- in- before) but 20 mm bore of pipe

All as per Sl item No. 88 (here-in-before) but 25 mm bore of pipe

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s) etc complete all as specified and directed by Engineer-in-Charge

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs stainless steel grating, 110 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

Dismantling of single layer Mangalore pattern or similar tiles in roofing etc complete all as specified and directed by Engineer-in-Charge

Preparing and painting surfaces of wall and applying one coat of cement paint all as specified and directed by Engineer-in-Charge

M&L for second class hardwood clean swan battens at 25 cm centres, section area exc 5 & n.exc 15 Sqcm etc complete all as specified and directed by Engineer-in-Charge

M&L in repair roof tiles, Mangalore Pattern, interlocking at side joints, laid dry etc complete all as specified and directed by Engineer-in-Charge

All as per item No 100 (here-in-before) but except tiles

M&L in repair ridge or hip tiles to suit, mangalore pattern of roofing tiles, bedded and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Dismantling pressed burnt clay tiles Plain / designer of any size in roofing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Hydraulically pressed burnt clay tiles Plain/Designer of size 200x120x10 mm machine made laid over & including cement mortar screed 15mm thick in cement and sand mortar (1:6) mixed with water proofing compound and jointrd, pointed in cement and sand mortar (1:3) mixed with 5% crude oil by weight of cement as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

M&L for providing precast cement concrete type B0 (1:2:4) (12.5mm graded stone aggregate) lauvres and roof 15mm thick set in cement and sand mortar (1:4) including all moulding but excluding frame (Pre cast frame shall be measured and paid separately under relevant item of this BOQ)

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc,) or any type ceiling board any thickness including cover fittets etc complete all as specified and directed by Engineer-in-Charge

Material and labour for false ceiling with 4 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on and including powder coated GI fabricated grid of 60 cm X 60 cm made out of main runner of 'T' section of size 32 mm X 24 mm X 0.30 mm, cross runner made out of 'T' of section of size 24 mm X 24 mm X 0.30 mm and alround angular section of size 22 mm X 22 mm X 0.70 mm with GI clip and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 1200 mm centre to centre as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

S & f in repairs for false ceiling boards with 4 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

S & F in repair 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with cement slurry and back coating of 10 mm thick and including polishing, rubbing & including silicon treatment etc complete all as specified and directed by Engineer-in-Charge

M&L in repair chequred cement concrete tiles 20X20X25mm thick set jointed & pointed in neat cement slurry in floor with grey cement & pigment incl 15mm thick screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m etc complete all as specified and directed by Engineer-in-Charge

Dismantling Abestos cement(Corrugated, semi corrugated etc) sheets in roof coverings etc complete all as specified and directed by Engineer-in-Charge

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs walls etc. fixed with `L' type or `J' type or cranked hook bolts etc complete all as specified and directed by Engineer-in-Charge

S&F in 10 mm thick toughen glass for shelves in corner etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel glass lock to tuffen glass etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 77,736.00 shall be deducted from BOQ on account of schedule of credit

Neha Enterprises

Priyadeep Construction

M/s. A P INFRA

M/S. M. F. Sharif & Co.

MS. G.A. CONSTRUCTION

M/s AG PATHAN

OM SAI ASSOCIATES

M/S-B.R.SONAWANE

Ms. S.K. ASSOCIATES

MS. A.S. CONSTRUCTION

M/s. Sagar Traders