8776REPAIRS MAINT OF LIGHTING CONDUCTOR EARTHING INFRACTURE CHEMICAL AND CONVENTIONAL EARTH PITS INTERNAL WIRING FITTING FIXTURE AND CONNECTED ACCESSORIES IN CE OFFICE 2 DC AREA TECH DOMOSTIC AREA KLP AND PH LINES IN WEST AREA AF STN JALAHALL

Amount

Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any position including fixture and fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, , etc., Making Good disturb surfaces of Walls/ ceillings, etc. in Cement Mortar 1:3 including providing surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the existing finishes, complete all as specified and as directed.

Taking down/out unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed Portion/ Surfaces of Walls/ Floor/ Ceiling, etc. by using Cement Mortar 1:3 including providing Surface Treatment to match the Existing Treatment/ Finishes on Ground, complete all as specified and as directed.

Material and labour Point wiring complete with 1.5 sqmm single core PVC insulated and sheathed cable 1100 volts grade, FRLS with multistranded copper conductor drawn through and including PVC Conduit medium grade 20 mm dia and all accessories in surface PVC conduit/existing concealed conduit/PVC casing-caping ets as per site requirement on walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly,existing/ new terminal box including fabricated steel terminal box made out of 1.60 mm thick MS sheet concealed in/suitable PVC box on surface walls and suitable for modular type top cover for housing modular type fixtures such as switches, socket outlets, fan regulators etc., all as specified and as directed for One light point /fan point controlled by one switch.

All as per item No 3 here-in-before but for One ceiling fan point controlled by one switch and one regulator.

All as per item No 3 here-in-before but for one exhaust fan point controlled by one switch.

All as per item No 3 here-in-before but for one call point controlled by one bell bush

All as per item No 3 here-in-before but for one socket outlet 5 Amps on same board controlled by one switch.

All as per item No 3 here-in-before but for one socket outlet 5 Amps on independent board controlled by one switch.

All as per item No 3 here-in-before but for one light point controlled by two way switch.

All as per item No 3 here-in-before but using 2.5 sqmm copper conductor multi stranded for power point.

Supply and fixing modular switch 1 way 10 amps,1 module .

Supply and fixing modular switch 1 way 16 amps,1 module

Supply and fixing Modular switch 2 way 10 amps, 1 module

Supply and fixing modular socket 6/10Amps,2/3 pin combined 2 module

Supply and fixing modular socket 6/16 Amps,2/3 pin combined 2 module

Supply and fixing the White cover plate with frame 1 / 2 Module complete by Engr-in-charge.

Supply and fixing the White cover plate with frame 3 Module complete all as specified and directed by Engr-in-charge

Supply and fixing the White cover plate with frame 6 Module complete all as specified and directed all as specified and directed by Engr-in-charge.

Supply and fixing the White cover plate with frame 8 Module complete all as specified

Supply and fixing fan regulator,120 W,2 module

Supply and fixing Switch Piano Flush type, 6 Amp, Single Pole, 1-way, 230 Volt AC and connected in repair up, complete all as specified and as directed.

Supply and fixed in repair Switch piano flush type single pole and one way 230 volts 5 Amps all as specified

Supply and fixing bell push 5A one way complete all as specified.

Supply and fixing Modular Bell push 6 Amps, modular type complete all as specified.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body complete all as directed.

Supply and fixing Switch Socket Combination 2-in-1, 3 Pin, 6/16 Amp, Flush type, Universal, 230 Volt AC and connecting up, complete all as specified and as directed.

Supply and fixing Socket Outlet 2-in-1, 3 Pin, 6 Amp, Flush type, 230 Volt AC and connecting up complete all as specified and as directed.

Supply and fixing Switch Socket Combination 2-in-1, 3 Pin, 6 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up complete all as specified and as directed.

Supply and fixing Ceiling Fan Regulator Dimmar Switch type, 230 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and connecting up, complete all as specified and as directed.

Supply and fixed in repair Modular type Fan regulator, 2 module in repairs.

Supply and fix lamp holder,PVC/Polycarbonate type with back plate complete all as specified and directed.

Supply and fix Door bell AC, 230 volts, single pole in replacement of old u/s bell/ buzzer complete.

Supply and fixing Bell Multi Music type 230 V.

Supply and fixed in repair electronic fan regulator socket type with 5 step speed control for fans all as specified.

Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.

Supply and fix LED lights fitting 1 x 20 W, 4' long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.

Supply & fix the Square LED down lighter 15 /18 watt fit at surface/Ceiling complete all as specified and directed and including taking down old fitting.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete and including taking down old fitting

Supply and fixing of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed including taking down old fitting..

Supply and fixing LED building Security Light Fittings 18/20 watts of turbo street lights are made up of pressure die cast housing with integrated lenses and high power LED's with IP66 protection. Efficacy ≥ 100LPW and other connected accessories including service bracket of GI pipe 32/40 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers as per required at site and making electrical connection with Copper wire 2 core of 1 Sqmm and taking down old unserviceable light any capacity any type complete all as specifiedcomplete all as specified and directed.

Supply and fix Electronic LED FTL rod 4 Feet capacity 20W complete and including taking down old tube rod.

Supply and fix PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable of size 0.75 Sqmm 2 core , 1100 Volt, conforming to IS 694 connecting up the light fittings all as directed.

Supply and fixing for sheet metal enclosure MCB DB, IP-43, SPN, 240 volts ,8 way, double door type and making electrical connection, complete all as specified and directed and including taking down old one.

Supply and fixing MCB SP, 6 to 32 Amps, 240 volts, 10 KA, 'C' Curve characteristics, including taking out old unserviceable MCB/Isolator, electrical connections and removal from the site complete all as specified and directed.

Supply and fixing MCB SPN,32 Amps, 240 volts, 10 KA 'C' Curve characteristics, including taking out old unserviceable Isolator & electrical connection and removal from the site complete all as specified and directed.

Taking down old MCB SPN and Supply and fixing MCB SPN 40 to 63 Amps rating, 'C' series , 10 KA breaking capacity, 240 V, 50 Hz AC complete all as specified .

Supply and fixing in replacement of TPN Vertical Type Distribution Board, IP-43 protection, fitted with bus bars, neutral links, blanking plates (with out MCCB), 415 volts, 4 way double door type, grouted in wall in cement mortar 1:3 and making good of disturbed surface and matching with existing surface, complete all as specified and directed and including taking down old DBs.

Taking down old MCB TP and Supply and fixing MCB TP 25 to 63 Amps rating, 'C' series , 10 KA breaking capacity, 415 V, 50 Hz AC complete all as specified .

Taking down old MCB TPN and Supply and fixing MCB TPN 40 to 100 Amps rating, 'C' series , 10 KA breaking capacity, 415 V, 50 Hz AC complete all as specified .

Supply and fixed in repairs Sheet metal enclosure with distribution board TPN 415 Volts 8 ways Double door with suitable bus bar for provn for MCBs/ Isolators, fixed to wall and making all connections all as directed.

Supply and fixing in replacement of MCCB, 4P, rated current 63 Amp, breaking capacity 16/18 kA thermal magnetic type and making electrical connection, complete all as specified and directed and including taking down old one.

Material and labour for replacement of unsv LED driver up to 20 W matching with existing fitting complete all as specified and directed by Engr-in-charge.

Supply and fixing LED driver suitable for 9/12 Watts LED fittings including connection of wires complete all as specified.

Supply and fixing LED driver suitable for 15/18/24 Watts LED fittings including connection of wires complete all as specified.

Supply and fixing LED driver suitable for 28/36 Watts LED fittings including connection of wires complete all as specified.

Supply and fixing Switch Piano Flush type, 6 Amp, Single Pole, 1-way, 230 Volt AC and connecting up including Taking down/ out unserviceable Switch Piano, complete all as specified and as directed.

Supply and fixing Socket Outlet 2-in-1, 3 Pin, 6 Amp, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Socket Outlet, complete all as specified and as directed.

Supply and fixing Switch Socket Combination 2-in-1, 3 Pin, 6 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Switch Socket Combination, complete all as specified and as directed.

Supply and fixing Switch Socket Combination 2-in-1, 3 Pin, 6/16 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Switch Socket Combination, complete all as specified and as directed.

Supply and fixing Ceiling Fan Regulator Dimmar Switch type, 230 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and connecting up including Taking down/out unserviceable Fan Regulator, complete all as specified and as directed.

Supply & fix junctions boxes, plastic, round, four terminals including taking down/out unserviceable juction box of any type, complete all as specified and as directed..

Supply & fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A.

Material and labour for wiring for circuit /sub main wiring with earth wire of size 2x 6.0sqmm + 1 x 6.0 sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC cunduit concelled complete all as specified and as directed.

Material and labour for wiring for circuit /sub main wiring with earth wire of size 2x 4.0sqmm + 1 x 4.0 sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC cunduit concelled complete all as specified and as directed.

Material and labour for wiring for circuit /sub main wiring with earth wire of size 2x 2.5 sqmm + 1 x 2.5 sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC cunduit concelled complete all as specified and as directed.

Disconnecting and taking down the complete ceiling fan from ceiling hook/bolts/fan box any size/make/sweep from any OTM of technical Area and refixing after repairs/replacement of various component of ceiling fan and reassemblings,refixing and Testing complete. (Repair/ replacement of various component of ceiling fan shall be measured and paid seperately against respective items). Note -The cost of replacement of unserviceable mild steel screws, nut bolt and washers cleaning of blades/down rod and body of ceiling fan greasing, oiling of bearing/bushes is included in the quoted rate against this item.

Material ans labour for rewinding of motor of ceiling fan 1200/1400 mm sweep with super enameled copper wire of appropriate gauge as per existing including necessary varnishing testing commissioning and Cutting and taking out the burnt out copper winding complete. Note:- Taking down and fefixing of fan shall be measured separatily under appropriate items.

Supply and Fixing Ball bearing suitable for 1200/1400 mm sweep ceiling fan of ball bearing No 6201/6202/6203 complete all as specified and directed.

Supply and fixing for replacement of gun metal bush of approved make for Ceilling fan any sweep/size/model complete all as specified

Supply and fixing for replacement of hanging/shackle clamp (hanger) with nut/bolt and rubber bush suitable for mounting/hanging of ceiling fan any type/any size all as specified and directed.

Supply and fixing in replacement of safety split pins of down rod of suitable size for any sweep make model of ceiling fans complete all as specified'

Supply and fixing for replacement of capacitor 3.15/2.5 mfd for ceiling fans of any make /model/sweep, complete all as specified and directed .

Supply and fixing fan blade set (set of three) made out of MS iron sutaible for 1200/1400 mm sweep ceiling fan, as per exisitng size and guage all directed

Supply and fixed in repair bottom cover suitable for 1200/1400 mm sweep of any make as required at site & directed by engr- in charge.

Supply and fixed in repair top cover suitable for 1200/1400 mm sweep of any make as required at site & directed by engr- in charge.

Supply & fix PVC canopy of 1200/1400 mm sweep ceiling fan any make as directed by Engr-in-Charge.

Supply and fixed in repair stator suitable for 1200/1400 mm sweep of any make as required at site & directed by Engr- in charge.

Taking down ceiling fan / Exhaust fan /Wall mounting fan ,sealing cable end dismantling the fan blade kept in safe cosdoty all as per specified . Note : Servicing and Spares will be measured and paid separately.

Hanging/Fixing only ceiling fan/Exhaust Fan/Wall mounting fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified ,and any addn/alteration /threading if required to down rod shall be done by contractor with out any extra cost.

Labour for servicing the ceiling / exhaust fan/wall mounting fan of any make including greasing /oiling /repairs and replacing the spares such as cater pin unserviceable / rusted bolts,split pins, rubber wheel, bearing, washers, bush all as specified and directed .

Material and labour for dismantling the defective ceiling fan/exhaust fan/wall mounting fan motor by taking out burnt copper winding ,rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material and other petty items required for making motor functional all as specified and directed.

Supply only ball bearing suitable for ceiling fan/Exhaust Fan/Wall mounting fan.

Disconnecting and taking down the complete Exhaust fan/Air circulator/wall mounting fan with bracket any size/any type form any OTM of technical area and refixing after repairs/replacement of various components and reassembling,refixing and Testing complete. (Repair/ replacement of various components shall be measured and paid seperately against respective items). Note - (i) The cost of replacement of unserviceable mild steel screws, nut bolt and washers cleaning of blades/down rod and greasing, oiling of bearing/bushes is included in the quoted rate against this item.(ii) Material and labour for rewinding of fans shall be measured and paid separately.

Materia and labour for rewinding of motor of exhaust fan 300 to 375 mm sweep with super enameled copper wire of appropriate gauge as per existing including necessary varnishing, greasing, testing commissioning, refixing etc and Cutting and taking out the burnt out copper winding complete all as directed by Engr-in-charge.

All as per item No 84 herein before but of size 450 mm.

All as per item No 84 herein before but rewinding of motor of wall mounted air circulating fan of 450 mm sweep any make including replacement ocsillation knob.

Supply and fixing for replacement of gun metal bush of approved make for exhaust fan any sweep/size/model complete all as specified

Supply and fixing for replacement of rubber pad sutaible for mounting exhaust fan any size complete all as specified

Supply and fixing for replacement of mounting brackets with nuts and bolts 300/350 mm size for exhaust fan of any make/size complete all as specified and as directed.

All as per item No 89 herein before but of size 450 mm.

Supply and fixing for replacement of blade assembly suitable for exhaust fan of same size make/model for 300 to 375 mm sweep single phase 230 volt completed all as directed .

All as per item No 91 herein before but of size 450 mm.

All as per item No 91 herein before but wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified

Supply and fixing for replacement of Mounting plate with screw of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Supply and fixing for replacement of Rear and front grill locking screw of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Supply and fixing for replacement of rotary knob with pull cord speed control of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Supply and fixing metal clad socket 20 Amps, AC, 230 volts in replacement of old u/s metal clad socket complete.

Supply and fixing metal clad plug 20 Amps, AC, 230 volts in replacement of old u/s metal clad plug complete.

Supply and fixing LED PC batten 4 feet light fitting 1 x 20 W, Surface mounted, 100 lumens/watt with inbuilt driver with all accessories and connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete including taking down old light fittings all as specified and as directed

Supply and fixing LED PC batten 2 feet light fitting 1 x 10 W, Surface mounted, 100 lumens/watt with inbuilt driver with all accessories and connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete including taking down old light fittings all as specified and as directed

Taking down u/s down light fitting in repairs, Supply and fixing compact & decorative energy efficient round/square recessed/surface mounted LED 12W square/round down light fitting and making all connections as specified.

Taking down u/s down light fitting in repairs, Supply and fixing compact & decorative energy efficient round/square recessed/surface mounted LED 18W square/round down light fitting and making all connections as specified.

Supply and fixed in repairs square recessed / surface mounted LED slim down Light fitting 35/36 W complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete including taking down old light fittings all as specified and as directed

Supply & Fix Retro LED 10 Watts,B 22, ball lamp complete all as specified .

Supply & Fix Retro LED 0.5 Watts,B 22, ball Red/Green lamp complete all as specified .

Supply only industrial flexible cable twin core 1.5 sq.mm complete all as specified and as directed .

Material and labour for earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mmdia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work is inclusive of necessary earth work and PCC chamber in type CI (1:2:4) with 8 CTD bar reinforcement both ways at 140 mm bents to centre complete all as directed by Engr-in-Charge.

Material and labour for earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earthstrip 25 X 3 mm by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work is inclusive of necessary earth work and PCC chamber in type CI (1:2:4) with 8 CTD bar reinforcement both ways at 140 mm bents to centre complete all as directed by Engr-in-Charge.

Supply and fixed in repair GI funnels for earthing complete all as specified and as directed.

Supply only of common salt commercial all as directed complete all as specified and as directed.

Supply only of charcoal dust complete all as specified and as directed.

Material & Labour for Aluminium earth strip of size 25 x 3 mm in ground not exceeding 40 cm deep/fixing to wall/structure including taking down old strip complete all as specified and as directed.

Material & Labour for GI earth strip of size 25 x 4 mm in ground not exceeding 40 cm deep/fixing to wall/structure including taking down old strip complete all as specified and as directed.

Material & Labour for copper earth strip of size 32 x 6 mm in ground not exceeding 40 cm deep/fixing to wall/structure including taking down old strip complete all as specified and as directed.

Supply and fixing single pointed Aluminium franklin rod/Air Termination rod of 12mm dia 300mm long fixed to aluminium strip including drilling holes, nuts, bolts washers, insulating mounting pads for resting/supporting of air terminals etc.,complete all as directed .

Supply and fixing in test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified and directed by Engineer - in - Charge

Supply and fix in repairs heating element suitable to existing model and make 2 KW Dual clip type/tri angle type / round type with rubber gasket suitable for geysers up to 50 Ltr capacity . Make: Theeta /Elteck or equivalent

Supply and fix in repairs thermostat clip type (Range 30 C to 80 C and acting at 70 C) for geysers up to 50 Lts. range 30 C to 80 C and acting at 70 C all as specified . Make: Elcon or equivelent.

Supply and fix PVC pipe connections up to 600 mm in length suitable to connect GI pipe 15 mm dia to hot /Cold water outlet of geyser.Make: Kohinoor or eqivalent

Supply and fix in repairs pressure release valves 15 mm suitable for geyser up to 50 ltrs capacity

Supply and fix indicating lamps green / red suitable for geysers up to 50 Ltrs capacity all as specifed

Taking down unserviceable plug top and supply and fixing plug top 3 pin 15/16 Amps 230 volts complete all as specified and directed.

Taking down unserviceable plug top and supply and fixing plug top 3 pin 5/6 Amps 230 volts complete all as specified and directed.

Supply and fixing metal flush box 1 module to 3 module

Supply and fixing metal flush box 4 module

Supply and fixing metal flush box 6 module

Supply and fix Bldg LED street light fitting 20/35 W, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having TOP Opening separate driver compaetment with IP-66 Protection and complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.

Supply and fixing RCCB 40 A, DP, 30 mA, 240 V including taking down unsv/defective RCCB of any type complete all as specified and directed. Make-Schineder/ Siemens/ Legrand

All as per item No 128 herein before but of size 63 A.

Supply and fixing Distribution Board Sheet Metal Enclosure, Factory made fixed Flush with Wall inside the Nitches or Outside on Wall surface suitable for mounting Isolators & MCB's 240 Volts suitable rated Bus-bar capacity SPN 8-way, Double Door Front Openable and connecting up including Taking down/out unserviceable DB Sheet Metal Enclosure, complete all as specified and as directed.

All as per item No-130 herein before but 12 Way.

Supply and fixing Condenser 2.5 mfd suitable for Ceiling Fan of any Make and Size including taking down/out unserviceable Condenser, complete all as specified and as directed.

Supply and fixing Mild Steel Down Rod 15mm nominal dia and 250mm to 450mm long, heavy duty, duly painted in matching Colour of Fan, necessary drilling, etc. for hanging of Ceiling Fan including Taking down/out unserviceable Down Rod, complete all as specified and as directed.

Supply and fixing Rubber Bush (Reel type) standard size and type duly fixed with suitable size Mild Steel Bolt, Nuts, etc. including taking down/out unserviceable Rubber Bush, complete all as specified and as directed.

Material and labour for Transporting Exhaust Fan 250/ 300/ 350mm Sweep from AGE E/M Store Yard to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

Supply and fixing PVC Stranded Copper Conductor Flexible Cable 1.5 Sqmm 3 Core for Electric Connection including Taking down unserviceable Cable, complete all as specified and as directed.

eurekaenterprises

ARUNOTHAYA TRADERS

RAMESH BABU CO