SPECIAL REPAIRS TO BUNGLOW NO P-12 INCL SERVENT QTR AND THE ASSOCIATED GARAGE AT MILIT GIRINAGAR PUNE

Amount

B/R SPECIAL SERVICE (PORTION 1) Demolition of cement concrete in floors and pavings n. exc. 15cm thickness (below or above ground level).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry including dismantling single layer Manglore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

All as per item here in befor but except tiles.

M&L for Ridges or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 etc. including dismantling of old ridges and rubbish off the premises complete all as specified and as directed.

Dismantling battens for tiles, shingle etc. of any size including tilting fillets spaced exc. 15cm.

M&L 2nd class hard wood clean sawn battens at 30cm having sectional area exc. 5 and not exc. 15Sqcm.

All as per item here in befor but fixing only.

M&L for 2nd class hardwood, clean sawn, in scantling timber work incl. dismantling of scantling and rubbish off the premises all as specified and directed.

M&L for Eaves/weather boarding with 20mm thick fibre cement board (Non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fibre tape as per manufacturer's instructions complete of approved arch pattern, size, colour and shape including dismantling of old boarding/eaves board fixed in any position complete all as specified and as directed. Make:- V-Board (Vishaka Indurstires Ltd)/Everest/Charminar/Ramco.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete.

M&L 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screws in roofs, walls with grade of zinc coating 275 complete.

All as per item here in above but fixing only except sheeting.

M&L 0.63mm thick Plain, Galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing with grade of zinc coating 275 complete.

M&L for Grinding & polishing of existing old terrazo floor/skirting/staircase with sufficient number of grinding rounds and finally bees-wax polishing on surfaces of any descripion, width or girth including cleaning and preparation the existing surface complete.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick.

M&L for Non Skid Ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L Glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7mm as in dado/skirting etc. and joineted neat in cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in CM 1:4 .

M & L for granite 18mm thick black/red colour (of any type) work (table rubbed and polished) in staircase steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames).

Taking down chowkats or frames of wooden or steel window not exc 1.5 sqm with Shutters (without taking off shutters from the frames).

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 125X60mm complete.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105X60mm complete.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as in filling steel frames etc. incl necessary form work complete.

M&L for 35mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete.

M&L for 35mm thick 2nd class H/wood gauged and skeleton shutters, open rebated and prepared to receive gauge etc. (with sash bars) edges of ramming plain, chamfered or grouted, fitted with cut of and mitred beads for securing gauge etc of size of members of shutters as specified in SSR Part-I section 8 clause No. 8.2(a) and fitted to chowkats complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia wire & average width of aperature 1.18mm complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer including preparation of new/old painted wood surfaces complete.

M&L for 300mm long stainless steel chromium plated decorative, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

M&L for 250mm long stainless steel chromium plated decorative, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

M&L for 150mm floor door stopper of stainless steel chromium plated fixed to door complete.

S&F 150mm long stainless steel chromium plated handles complete.

S&F 200mm long stainless steel chromium plated barrel tower bolts complete.

S&F 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate including fixing to door complete.

S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminim window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc. complete all as specified.

M&L for 3mm thick figured glass, pin head type and glazing with not exc 0.5Sqm in each pane to aluminium frame work for ventilators complete.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium frame work complete.

M&L for Two coats of french polishing on old wood surfaces of any description, width or girth including cleaning and preparation the surface complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel fancy chromium plated 25mm dia as in curtain rods all as specified and directed by Engr-in-Charge complete.

S&F Stainless steel chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc. complete all as specified and directed by Engr-in-Charge complete.

S&F stainless steel chromium plated 6 Pin, 45Cm to 60Cm long hanger fixed to wall with screws complete.

S&F readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make:Easy dry or equivalent.

S&F 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete.

M&L for Two coats of french polishing on old wood surfaces of any description, width or girth including cleaning and preparation the surface complete all as specified and directed by Engr-in-Charge.

M&L for 50mm cupboard magnet including high quality magnet and steel plate.

S&F soft close full cover 35mm dia 110degree cupboard/cabinet hinges complete fixed to particle board/wooden frame work complete.

S&F 125mm brass cupboard handles, cast type, polished bright fixed with nut screws and washers complete all as specified and directed.

S&F 125mm Hasp and staples safety type brass with mild steel hinge pin inlcuding bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.

S&F 16mm thick, prelaminated both side cement bonded particle board are to be of wood finish teak shade and conforming to IS-142-1995, (Bison Panels by NCL group, member indian green building council). The composition of the boards comprises of approximately 60% Cement 30% plantation wood (remaining being other chemical/water binders etc.) with a density of approximately 1250-1300Kg/M3, including fixed with scews to Aluminium frame work for doors, partitions, cabinets, cupboards, wall panelling, cladding etc. including screws and all screw finish with lambi etc. as per specifications. Note:- All Bison panels are fixing by self threaded machine screw, 25/38mm as per requirement. the system used together should carry a 10 years warrantee.

S&F aluminium two track sliding channel suitable for fixing of 16mm thick particle board each track complete all as specified and directed.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface.

M&L for treating the soil from termite under plinth protection at the rate of 5 Litre of emulsion per square meter of surface area complete.

M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection.

S&F Stainless Steel kitchen utensils dish rack size 39"x36"x10" complete.

S&F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid and including 20mm screed bed in CM 1:6 complete.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Rendering 20mm thick on stone masonry surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified.

Rendering 20 mm thick on stone masonry surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified.

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling complete all as spescified.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new or old plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of wall complete.

M&L for two coats of oil bound distemper over a coat of primer on Old surfaces of wall complete.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of ceiling complete.

M&L for two coats of oil bound distemper over a coat of primer on old surfaces of ceiling complete.

M&L for two coats of external acrylic (100%) waterproof emulsion paint Apex Ultima or equivalent complete all as specified and directed over a coat of alkali resistant primer on new plastered surfaces of wall including necessary scaffolding required for painting work, safety measures etc.

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought upto couses stone work built in cement or cement lime mortar including necessary scaffolding complete all as directed by Engr-in-Charge.

M&L Flush pointing in CM 1:3 to random rubble or polygonal rubble uncoused stone masonary wall including preparation of surface including necessary scaffolding arrangement complete all as directed by Engr-in-Charge.

S&F for solid PVC coloured door frame of size 50 x 47mm made oit out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing.

S&F for factory made solid PVC moulded door shutter 28 to 30mm thick (sysles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on front face and 2mm plain colour PVC sheet on back face with particle board core.

S&F 100mm butt hinges medium weight cold rolled mild steel.

S&F 150mm long Aluminium anodised barrel tower bolts.

S&F 150mm size aluminium anodised door handles.

S&F in repair vitreous china orrisa pan squatting pattern 580x440mm with integral foot rests including P or S trap, including PVC low level flushing cistern 10 ltr capacity complete all as directed by Engr-in-Charge.

S&F in repair Vitrious china wash down water closet pan (pedestal pattern), any colour with and including and fixing bolts, white seat cover, 10ltr capacity PVC flushing cistern and flush pipe complete all as directed by Engr-in-Charge.

S&F in repair Wash hand basin, vitrous china, coloured flat back of size 550 x 400mm encluding cutting for and pining in ends of brackets or erecting stand including brass waste coupling waste pipe, 15mm dia bore pillar taps, cast copper alloy chromium plated fancy type fixed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.

S&F in repairs Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S & F stainless steel grating doom 125mm dia complete all as specified.

S&F Chromium Plated Toilet Paper Holder Make - Jaguar,Cera.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete. Make - Jaguar,Cera.

S&F in repair 125mm chromium plated shower roses with or without swivel joints, any size including fixing to uPVC/Steel pipe complete.

S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed. Make Jaguar,Cera.

S&F Chromium plated Jet Spray with CP connection pipe for EWC 15mm bore with fittings complete all as specified and directed. Make Jaguar/Cera.

S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for uPVC/iron Pipe complete.

S&F in repair sinks made of stainless steel 1mm thick kitchen with plugs, washers and waste coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste pipe complete.

S&F Brass CP mixer including connection pipes for mixing hot or cold water screwed down for uPVC/iron pipe and fixed complete.

S&F brass chromium plated tubular towel rail 20mm dia including brackets both side complete

S&F brass chromium plated bracket for towel rail complete.

Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified.

S&F for steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floor, complete including taking up or down steel tubing and connections or removal to store all as specified & directed.

All as per item here in befor but 15mm

M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as directed by Engr-in-Charge.

Disconnecting of existing 500ltr water tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in new position complete.

S&F 500 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 25mm high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store all as specified and directed.

S&F 1000 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 25mm high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, floor of size 110mm bore complete.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, floor of size 75mm bore complete.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore.

S&F PVC (SWR) bends of any radius 110mm bore.

S&F PVC (SWR) bends of any radius 75mm bore.

S&F PVC (SWR) brach piece, single (single Y) equal or unequal 110mm bore.

S&F PVC (SWR) brach piece, single (Single Y) equal or unequal 75mm bore.

S&F PVC (SWR) brach piece, double (Double Y) equal or unequal 75mm bore.

S&F PVC (SWR) vent cowl 110mm bore.

S&F PVC (SWR) vent cowl 75mm bore.

S&F PVC (SWR) gully traps 125/100mm setting and jointed in cement solvent complete.

Complete removal of entire existing water proofing treatment in any position including tarfelt, Plaster, lean concrete, gravels etc. and removing the debries out side MD land all as specified and directed.

M&L for cement concrete type B1,1:2:4 (20mm graded stone aggregate) as in kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for seprately as "Supply Only"

M & L for APP based polymeric membrane minimum weight 3 Kgs/Sqm and minimum 3 mm thick reinforced with polyster non-woven fabric ( wt not less than 150 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm and finishing with preventive coat with aluminium paint @ 100m/sqm all as directed and specified including cutting chases to wall and making good in CM 1:3 as in vertical surface complete.

Supply only WPC.

M&L for cement concrete type B1,1:2:4 (20mm graded stone aggregate) as in bed block, kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed.

S&F welded steel wire fabric weight not exc. 4kg per Square metre fixed to steel member complete all as directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n.exc 0.50 cum gettign out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil.

M&L cement concrete in foundation type C 2, 1:3:6 ( 40 mm gde stone aggregate) as in filling and mass concrete.

S&F Rolled mild steel work as in trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including necessary cutting, welding complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/ridges/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

S&F for plain/chequered plates, channels, square cut or notched (ordinary and counter sunk) forming holes conforming to Fe 410-W (Gde E-250) complete all as directed by Engr-in-Charge.

S&F steel work in tubular/square/rectangular trusses, cantilever, purlin staging including special shaped washer etc. complete using ERW or induction butt welded square/rectangular pipes including necessary cutting, welding complete all as specified and directed by Engr-in-Charge.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on steel surfaces exc 10 cm width or girth etc.

SPECIAL ITEMS (B/R PROTION 2) S&F for Modular kitchen cabinet and wall mounted cabinet comprising of with and including necessary all other fixing arrangement and screws as per requirement at site etc. All cabinet made of 18mm thick glossy/matte finish solid waterproof MDF board and outer side and top side shall be of 18mm thick prelam coloured solid MDF board, for fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge.

S&F 12mm thick glossy/Matte Finish solid waterproof MDF board for kitchen wall cabinet back side and etc. comprising of with and including necessary all other fixing arrangement as per requirement at site. For fixing the items fitted in position to wall minimum screws size 120mm complete all as specified and directed by Engr-in-Charge.

S&F for stainless steel grill pattern Bottle Rack size 8"wide and 20" deep including stainless steel channels of make Hettich,Godrej or Hafale. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern basket of size 21"x4"x20" deep including stainless steel drawer channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge.

S&F for stainless steel grill pattern basket of size 21"x6"x20" deep including stainless steel drawer channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern basket of size 21"x8"x20" deep including stainless steel drawer channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel perforated cuttlery box of size 21"x4"x20" deep and including stainless steel drawer channels of make :- Hettich, Godrej or Hafale. Thickness of stainless steel sheet be 1mm thick, fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern Grain Trolley with base of size 21"x24"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern Plate rack of size 21"x8"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F for stainless steel grill pattern Cup and Soucer rack of size 21"x6"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.

S&F chromium plated auto hinges split box type overlay door mounting option, opening angle 110degree fixed, with screw all as specified and directed by Engr-in-Charge. Make :Kea SCH or Hettich.

S&F 100mm long stainless steel decorative cupboard handles fixed with nuts, screws and washer complete all as specified and directed.

M&L for 304 grade stainless steel frame work for fixing of modular kitchen below kitchen platform including necessary welding, fixing in true level and position as per availability of size below kitchen platform complete all as specified and directed by Engr-in-Charge.

ROADS /PATHS/HARDSTANDING (B/R SERVICES) Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) and removing form site all as specified and directed.

M&L for Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc.15cm thick including watering and ramming upto a true surface.

M&L for cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base 75mm thick complete.

M&L for sand cushioning below interlocking paver block complete.

M&L for Machine pressed glossy finished rubber moulded coloured precast cement concrete interlocking paver block with pigment and shape and size as approved, conforming to IS 15658-2006 of 60mm thick, M-35Grade.

M&L for cement concrete type B1 (1:2:4), as in kerb or mud stop rounded or champhered on edges, shape and size as approved complete.

FENCING GATE /COMPOUND WALL (B/R SERVICES) Dismantling of Mild steel framed work as in gates, doors, fencing post etc. but excluding framed truss, complete all as specified and as directed.

Framed MS work as in doors or gates of angle or other section with gusset plates, rails braces etc, complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete all as directed and complete with locking arrangement.

Mild steel black sheet in door 1.60mm thick in steel gate and similar work cut to size, holes punched, including round headed screws, cut nails or revets and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded seams including or turning up, mitred complete all as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete.

M&L for cement concreate 1:2:4 type B1, using 20mm graded stone aggrigate as in coping including necessary form work and finishes the surfaces even without using extra cement complete all as specified.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Rendering 15mm thick on concrete/PCC block or stone walls surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified.

M&L for two coats of external acrylic (100%) waterproof emulsion paint Apex Ultima or equivalent complete all as specified and directed over a coat of alkali resistant primer on new plastered surfaces of wall etc.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on steel surfaces exc 10 cm width or girth etc.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any

S&F welded steel wire fabric weight not exc. 4kg per Square metre fixed to steel member complete all as directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n.exc 0.50 cum gettign out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil.

M&L cement concrete in foundation type C 2, 1:3:6 ( 40 mm gde stone aggregate) as in filling and mass concrete.

M&L for mild steel angles as in post and struts in fencing incl cutting tops and shape as directed incl drilling holes, notching for wire etc conforming to Fe-410W (Gde E-250) etc of any description complete all as specified.

Fixing only chain link fencing including line wires, any mesh size and type and type of standards, rails, straining bolts etc including provision of binding wire all as specified.

Supply only MS galvanished chain link fencing with 3 mm dia and size 50 mm x 50 mm including line wires including strain bolts, binding wire etc all as directed.

S&F round bars 10mm dia ( Fe 410 W gde E 250) and over, cut to length, bent to shape required,including binding and welding with mild steel wire (annealed) not less than 0.9mm dia complete all as specifiedd and directed.

S&F mild steel flat iron (Fe-410-0 or Fe – 310 –0) as in bands / straps / rails for chain link fencing cut required length including necessary drilling holes for fixing bolts all as specified and directed.

M&L for mild steel bolt factory made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square not exc 5cm long end dia neck 11 to 15mm etc complete all specified and directed by Engr-in-charge.

Demolition of Stone masonary/PCC block walling built in cement mortar complete.

M&L for stone masonary uncoursed, well bonded, bedded and solidly hearted as in drain walls built in CM 1:4

Flush pointing in CM 1:3 to random rubble or polygonal rubble uncoused stone masonary wall including preparation of surface including necessary scaffolding arrangement complete all as directed by Engr-in-Charge.

INTERNAL ELECTRIFICATION (E/M PORTION) Taking down carefully aluminium / copper point wiring complete (light, fan socket & power) including unserviceable fixtures and fittings such as switches ceilimg roses pendents regulators sockets light fittings etc complete removing material for taking credit & making good disturbed wall / floor etc complete all as directed by Engineer-in-Charge

Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box , modular cover plates with frame mounting for housing the switches, socket outlets etc, all as specified and directed . (a) One light point controlled by one way switch.

(b) One light point controlled by Two way switch.

(c) One fan/exhaust fan point controlled by one switch and one regulator.

(d) One bell/buzzer point controlled by one bell push button on independent.

(e) One 3 pin switch socket outlet point 5 Amps on independent board.

(f) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch 1 way 6A, 1 module

S & Fix modular switch 2 way 6A, module

S & Fix modular switch1 way 16A, 1 module

S & Fix modular socket out let 6A 2/3 on combined 2 module

S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module

S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete.

S&Fix fan regulator electronic 2 modular type volts AC 50 HZ ,300 Watts,4step complete all as directed.

S & Fix lamp holder PVC type with back plate suitable for lamp holder fitting.

S & Fix Bell push modular type SP 6 Amps.

S & Fix call bell (Ding Dong) 240 V, 50 Hz

S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable 23/0.0076 from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge. Make :- Bajaj Cat Part No - BLRB DB 118 or eqvt in Wipro/Havell/Crompton.

S & Fix LED tube light rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make - Bajaj Cat Part No - BLRB 18W LED or eqvt in Wipro/Havell/Crompton.

S&Fix LED Tube Light Fitting 10 watt, 230 volts, complete with all accessories all as specified & directed by Engr-in- charge.Make :- Bajaj Cat Part No - BCLSB WH 10 NT or eqvt in Wipro/Havell/Crompton.

S&Fix LED wall mounting fancy Light fitting,14 watt, 230 volts, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. all as specified & directed.Make :- Havells Cat Part No.LHFOECE1TZ1O014 or equivalent model of WIPRO / Philips / Bajaj and Jaquar

S & Fix Round surface mounting LED 12 W luminari Integal round shape suface mounting high power LED luminaire, done shape opal diffuser complete with all Fixing arrangement Coplete with all as specified & directed by Engr - in -Charge. Bajaj Cat part No :-BGSLO SLEEK SURFACE 12W WH RD or eqvt in Wipro/Havell/Crompton.

Taking down the defective ceiling fan / Exhaust fan of any sweep and make after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of painting re-fixing, testing in all respect for smooth running complete.

Taking down the existing unserviceable Geyser and after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the geyser by thoroughly cleaning the tank, thermostat, heatingelement and LED Lamp indicator, testing in all respect for smooth running and refixing complete all as directed.

S&Fix MCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.Make : Legrand or eqvt make of ABB/Siemens

S & Fix of MCCB Four pole, 415 volts, 63 Ampere, rupturing capacity 16 KA, complete all as specified and directed.

S & Fix sheet metal enclosure distribution board SPN, 12 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

S & Fix sheet metal enclosure distribution board SPN 4 ways 240 volts, 100 amps rated busbar with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed.

S&Fix sheet metal enclosure distribution board SPN, 2 ways 240 volts, with 100 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix Metra plug and socket DB's with MCB 20A SPN for AC.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping with its accessories all as specified and directed by Engr-in -charge for the following (a) 2x1.5 sq mm and 1x1.5sq mm as earth wire

(b) 2x4.0 sq mm and 1x4 sq mm as earth wire

(c) 2x6.0 sq mm and 1x6 sq mm as earth wire

S & Fix LED street light 30 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 66 and complete all accessories and fixing arrengenment all as specified and directed by Engr-in-charge. Make - Bajaj Cat Part No - ENXT P 30L WH CR PC SD Havells Cat Part No -ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC / Crompton Cat Part No - LTRUMP0030XW or other.

Supply & fix LED 9W Tulip LED Bollard for 360 degree light with a modern look using new generation technology in LED to direct light, diffuser with IP 65 protection, resistance to impact and corrosion, glare free and better uniformity and as per site requirement of pcc 1:2:4 foundation to installed Bolladd light fitting in the garden all as directed and specified. Make: Bajaj Model No: BGBOM 650 9W LED WW or equivalent in Wipro /Havells.

Taking down the existing electric meter of Single Phase/ Three phase any capacity and make after disconnecting electrically and carry out the cleaning and refixing, reconnecting including applying one coat of paint on existing ms box of electric meter testing in all respect fo smooth running complete all as directed by Engr -in charge.

M&L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less that 1.5M below normal grouond level connected to GI earth wire 4 mm dia by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 03 of SSR Part-I connected to earthing test point / DB including excavation / earth work in any type of strata, removal of surplus earth, GI pipe for watering pipe with and funnel, PCC 1:3:6 Type C-1 chamber with 40 mm thick RCC 1:2:4 type B-1 in cover slab with TMT bars @ 150 mm c/c both way with GI protection pipe complete all as specified and directed by Engineer-in-Charge.

EXTERNAL ELECTRIFICATION (E/M PORTION) Supply and Laying and testing cable XLPE insulated heavy duty electric cables with multistanded aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm, 4 core cable connecting lugs, glands,jointing materials etc, laid on surface,wall, floors, roof, ducts and fixing using clamps, saddle complete all as directed by Eng-in-charge.

(b) 6 Sqmm, 2 core

(b) 4 Sqmm, 2 Core

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in Hard / dense or any type of soil including forming bottom surface etc.

Returning, filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point.

Supply & Laying 40 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement.

M &L for GI pipe ''light grade'' for road crossing / on wall / on pole for cable protection of following size:- Make: TATA/JINDAL/ PRAKASH SURYA (a) 40 mm dia

M/S OMSAI ENTERPRISES