Supply, Installation, Testing and Commissioning of Addressable type fire detection cum alarm and public address system in block - III, IV, V and VI in academic area at IIT Delhi.

Amount

Supplying, installation, testing & commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of addressable phone control module complete as required.

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

Supplying, installation, testing & commissioning of intelligent interface unit BAC net/ Modbus protocol i.e. supplying communication links between building management system and fire alarm control panel complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.

Supplying & laying of 2x1.5 sq.mm fire alarm armored cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armoring & FRLS outer sheath complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

Speaker cable Single pair, 2-core, 1.5 sq.mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

20mm dia

Supplying, installation, testing & commissioning of intelligent addressable multi criteria (Smoke + Heat + CO + IR) detector including suitable photo detector complete with base as required.

Supplying, installation, testing & commissioning of intelligent addressable High Sensitivity Photo Detector with sensitivity level of 0.02% to 2% Obs/Feet. The detector shall have the parabolic amplifier to focus the light beam to a very small volume near the receiving photo sensor at the incipient stage of fire- when the smoke particles are lesser than 0.3 microns intrudes inside the detection chamber & shall have better response time at much earlier stage of fire.. The detector shall have twin bi-color LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches.

Supplying, installing, testing and commissioning of Microprocessor based Multi-loop, Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 trouble events including 1000 alarm log history events, Self-Programmable alphanumeric keypad for programming. The panel should be equipped with sufficient number of loops & each loop shall have a capacity of minimum 125 detectors & 125 other devices excluding 20% spare. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition with the charging capacity of 200AH. The panel shall be capable of self-programing without any dependency on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for programming the panel with all necessary Licence. Panel shall have Modbus/ Banet over IP protocol for future integration with BMS. However, for present arrangement FA system will be standalone with 24x7 monitoring. The panel shall be capable for remote accessibility on a mobile app through cloud platform/solution. Complied to meet UL864, 10th Edition and FM Approved.

Ten Loop Panel

Two Loop Panel

Supplying, installing, testing and commissioning of Talk Back (Two Way Communication) Fire Fighter telephone Control Panel and will be of same make of FAS Panel and seamlessly integrated. The panel shall be seamlessly Integrated to 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on same peer-to-peer Network and 2 ways Communication Fire Fighters System. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers.

Supplying, installing, testing and commissioning of Digital Audio Amplifier. Amplifier shall be capable of N:N/N:1 configuration and shall be dual channel capable of processing Two of 8 audio channels and total of 100W at 70.7 VRMS output along with necessary enclosures with local FFT Raiser. The Digital Audio Amplifier shall be fully monitored for fault and alarm reporting. The proposed Digital Audio Amplifiers shall (be Wall/Panel Mounted) not be rail mounted / dependent on Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of Amplifier operation. The Amplifiers shall be distributed accross the building/floor to manage the sound attenuation problem & for the best sound intelligibility. All amplifiers shall provide back up of minimum 5 hours using secondary power source(battery power/UPS power)

Supplying, installing, testing and commissioning of Network Repeater Panel with Programmable alphanumeric Qwerty keypad with 640-character LCD display with backlighting / 10 inch LCD Touch Type, mapping minimum 2,00,000 points on network. The NRP shall act as an independent node communicating on the peer to peer network and shall not be dependent on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation. UL Latest Version & FM Approved

Routine, preventive and breakdown maintenance & round the clock x 7 days monitoring of installed Fire Detection & Alarm system by deputing 03 nos. skilled technical person [01 No. in each shift x 3 shifts] who have pased minimum ITI in Electrical / Electronics / Instrumentation discipline & should be vigilant etc as required. [N.B. - [a] Materials, if any, required due to fault / malfunction of the system beyond DLP to be given by the Institute & to be replaced by the contractor [b] Attendance of deputed staff shall be maintained through manual as well as biometric machine to be kept in the fire control room [c] any shortfall of attendance of staff will affect the billing proportionately [d] Latest Labour regulation shall be complied strictly] (e) Weekly rest will be provide by the firm. 1 Year : Free of cost [ Totally Comprehensive]

2nd Year [365x3]

3rd Year [365x3]

4th Year [365x3]

5th Year [365x3]

6th Year [365x3]

EVAN Automation Pvt Ltd. (BID ID -3286580)