Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹16.3 L+₹60,697.30 (3.86%)Rejected-Finance | L2 | Rejected-Finance Higher bidder | |
| 3 | L3₹16.4 L+₹73,157.80 (4.66%)Rejected-Finance 0 3 SHASTRI STREET FEROZEPUR CITY PB 152002 | FEROZEPUR CITY | FEROZEPUR | PUNJAB | 152002 | L3 | Rejected-Finance Higher bidder | |
| 4 | L4₹17.7 L+₹2.0 L (12.6%)Rejected-Finance | L4 | Rejected-Finance Higher bidder |
Tender Value
Refer Docs
EMD Value
₹46,300
Closing Date
22 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ferozepur Cantt
CWE Ferozepur Cantt, PIN-152001
CWE/FZR-20/2023-24 SPL REPAIRS TO GOVT MD ACCN BLDG NO NP-25 AT ZONE UNDER AGE B/R-I OF GE (WEST ) AT FEROZEPUR CANTT
2023_MES_624983_1
CWE/FZR-20/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE West Ferozepur Cantt
₹46,300
Yes
1 Jan 2024
26 Oct 2023
29 Nov 2023
26 Oct 2023
22 Nov 2023
9 Nov 2023
Amount
Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area complete all as specified and as directed by Engineer-in-Charge.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 20mm thick screed in cement mortar (1:3) on brick/concrete of roof surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Supply only water proofing compound.
Material and labour for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 bitumen and laid on roof, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for mud phuska, 80mm thick, average consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 40 mm thick brick tiles laid over a layer of 25 mm thick mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, complete all as specified and as directed by Engineer-in-Charge.
All as per item No 9 herein before but using old brick tiles retrieved from dismantling (Item No 01 here in before) including cleaning and removal of mortar from tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plain Cement Concrete (1:2:4) type B-1 using 20mm graded stone aggregate min radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including formwork complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering/plastering on external surface of the wall of 15mm thick in cement mortar (1:4) on brick wall surfaces, finished even and fair complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified and as directed by Engineer-in-Charge.
Material and labour for white wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old treated plastered surfaces of walls after complete removal of existing treatment and applying two coats of cement base paint complete all as specified and as directed by Engineer-in-Charge.
Material and labour for complete removal of existing treatment of wall suface and applying two coats of oil bound distemper over a coat of primer on a coat of 1mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge.
Material and labour for white wash in two coats on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge..
Material and labour for preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old steel surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old wood or wooden based surfaces of any description not otherwise description over 10 CM width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and as directed by Engineer-in-Charge
Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge
Material and labour for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18 Sqm as in skIrting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing glazed coloured and cereamic tiles in vertical surfaces 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfacescomplete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and as directed by Engineer-in-Charge.
All as per item 31 here-in-before but using old bricks retrieved from demolition under item 30 here-in-before including cleaning and removal of mortar from old bricks complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames area not exc 1.5 sqm each (Without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per above itrem No 33 but exc 1.5 Sqm and not exc 4.0 Sqm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge and as shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 (Kept in GE Office).
Material and labour for factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge and as shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 (Kept in GE Office)..
Material and labour for factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge and as shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 (Kept in GE Office).
Material and labour for forming jambs etc built in cement mortor 1:6 to openings incl cutting toothing and properly bonding into to old work also facing ,jointoing and pointing to match to existing work complete all as specified and as directed by Engineer-in-Charge.
Material and labour for pressed steel frames made of 1.25mm thick MS sheet of profile 105 mm x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per item No 39 here-in-before but size 125mmx60mm with double rebated.
Material and labour for PCC (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35mm thick second class hard wood plain framed, panelled shutters (two panel), with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commencial veneering on both faces. The size of rail and style as per IS:1003 (Part I), Kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and as directed by Engineer-in-Charge.
Material and labour for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified and as directed by Engineer-in-Charge. .
Supply and fixing 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complet to wooden/Steel window not exc .5 sqm in each pane
Hacking out old broken glass from metel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new complete all as specified and as directed by Engineer-in-Charge.
Dismantling of boarding of any description and in any position complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 16-18 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVC on three sides as in supporting block to shelves complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Material and labour for solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing complete all as specified and as directed by Engineer-in-Charge.
Material and labour for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT handle 125mm long fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B21 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 150mm long aluminium, anodised barrel tower bolts of extruded section, as fixed in repairs all as specified and as directed by the Engr-in-charge.
Supply and fixing 300mm long aluminium alloy anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 125mm Extruded aluminium alloy handle as fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Material and labour in repairs 300 mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engineer-in-Charge. and as directed by Engr-in-Charge.
Supply and fixing galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engineer-in-Charge.
Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing complete all as specified and as directed by Engineer-in-Charge.
All as per item No-64 here in before but 20mm dia complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 20mm ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc as fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing gun metal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 125mm dia CP grating doom with waste hole of PTMT (minimum weight 40 gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 125mm PTMT grating doom with waste hole of PTMT (minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.
Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes , complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Cast iron floor trap for 75 mm bore pipe with cast iron grating including jointing to waste pipe in run lead as in repairs fixed with cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen or laboratory with plugs washers38/40mm diaa PVCwaste pipe and including 38/40mm dia CP waste coupling fixing cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm complete all as specified and as directed by Engineer-in-Charge.
Supply & fixed stainless steel plate rack 1.00 mm thick racks of standard qality 900 x 750 x 250mm size in repair including necessary shelves etc as fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing CP Soap dish Oval /square type as fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixed 20mm dia mild steel PVC colour powder coated curtain rod with fancy type brackets including with all fittings as fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15mm bore bib tap fancy type of chromium plated cast copper alloy brass, screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15mm bore pillar tap,fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15mm bore fancy type chromium plated Stop cock cast copper alloy screwed down, high pressure screwed both ends for iron pipe or union as fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms) complete all as specified and as directed by Engineer-in-Charge.
Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for marble work 18 to 20 mm thick in steps ,jambs,pillars,cooking platform and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade other than white and black types over a 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing machine pressed precast 60mm thick concrete interlocking paver block (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE, set over & including 25 mm sand cushion complete all as specified and as directed by Engineer-in-Charge. Note :- Sand cushioning will be measured and paid seperately
Material and labour sand filling under interlocking paver block for cushioning complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregates) 75mm thick as in sub base of floor complete all as specified and as directed by Engineer-in-Charge. & directed.
Material and labour for cement concrete (1:3:6) type B-1 using 20mm graded stone aggregate as in plinth protection, sub base etc 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Dismantling of steel work including doors ,gates but excluding framed truss etccomplete all as specified and as directed by Engineer-in-Charge.
Supply and fixing mild steel Fe 410 -W(Gde E-250 quality Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing framed work such as grills grating etc with ends of bars shoulders ans or riveted, or forged in to spikes: framed guard bars barred iron doors ladders framed balusters walk way railing framework of water cooler stand , angle iron in stair steps, iron gate and similar work conforming to fe 290.Gde E-165 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 1.00 mm thick mild steel ,plain sheet in gates and similar work cut to size ,holes punched including round headed screws clout nails or revits and fixed to steel framing with plain 40 mm lap joints with rivited or welded incl bending or turning up etc complete all as specified and as directed by Engineer-in-Charge.
Dismantling plain or corrugated AC sheet/fibre sheet on roof covering complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge for :- (a) One light/fan/Bell Point controlled by one single pole one way switch.
Ditto all as per item No 102 above but one socket outlet on the same board controlled by one single pole one way switch complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per item No 102 above but one 5 amps socket outlet independent controlled by one single pole 5 Amp switch complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per item No 102 above but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing switch piano flush type single pole one way 5/6 Amp complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing switch piano flush type 15 amps, single pole one way duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing socket outlet 2 in one , 5/6 Amps flush type ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing bell push flush type 5 Amps duly ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing ceiling rose, PVC/ Polycarbonate , isolated three terminals complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing Lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing bell ding dong type AC 230 Volt single pole complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing MCB, Single pole 240 V,6 - 32 Amps 10 KA 'B Series complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing in repair MCB single pole (SP) 240 volts, 40 Amps, 10 KA 'B' Series complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and as directed by Engineer-in-Charge.
Supply & Fix in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as specified and as directed by Engineer-in-Charge. (Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).
Material and labour for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and as directed by Engineer-in-Charge. ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and as directed by Engineer-in-Charge.
Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core complete all as specified and as directed by Engineer-in-Charge.
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth for taking out and laying UG cable and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and as directed by Engineer-in-Charge.
Material and labour for sand cushioning with a layer of fine sand 8 cm thick begore laying of cable and 5 cm thick after laying of cable in trenches complete all as specified and as directed by Engineer-in-Charge. Notes : (i) Excavation and earth work to be measured and paid separately). (ii) Thickness of 18 cms after punning shall be considered for payment.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engineer-in-Charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.
Material and labour for bricks (Size 23x11.5x7.5 cm) common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc complete all as specified and as directed by Engineer-in-Charge.
M/s Manoj Construction Co.
Marwaha Builders
Manjeet Singh Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .