REPAIRS/ MAINT OF STREET LIGHTS, HIGH MAST LIGHTS AND OTHER CONNECTED ITEMS UNDER GE (W) MUMBAI.

Amount

Taking down and up old unsereviceable XLPE underground cable of any size from pole wall/roof/trenches all as specified and directed.

Taking down old broken unserviceable, damaged/rusted swaged steel tubular poles/ cement poles of any size and remove from site all as specified and directed.

Taking down old unserviceable burnt cable 1.5 sqmm to 6 sqmm size all as specified and directed.

Taking down old unserviceable building security light/ street light/ flood light fitting of any type and any capacity and remove from its location all as specified and directed.

Taking down old unserviceable post top lantern, decorative outdoor fitting of any capacity and any type and remove from its location all as specified and directed.

Taking down old unserviceable looping box alongwith clamps nuts and bolts and remove from its location all as specified and directed.

Taking down/out old unserviceable rusted GI pipe light grade of 50mm/40mm/25 mm bore and remove from its location all as specified and directed.

Supply and laying cable insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 1.5 Sqmm X 3 core for connecting up to post top lantern, garden light and looping box all as specified and directed .

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 4 sq. mm X 2 Core in service connections all as specified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 6 sq. mm X 2 Core in service connections all as specified and as directed.

S&F looping box made out from fiber of size 300X200X112mm, out door type weather proof with locking arrangement & comprising of three phase connector and MCB SPN 10 Amp, with suitable bus bar arrangements and fix on pole with and including suitable size MS clamps, MS flat iron, cable glands, nut bolts, washers all as specified and directed.

S&F looping box made out from fiber of size 175X150X100mm, out door type weather proof with locking arrangement & comprising of connector MCB SPN 6 Amp and fix on pole with and including suitable size clamps, MS flat iron, cable glands, nut bolts, washers all as specified and directed.

M&L GI tubing 50 mm dia light grade galvanized for cable protection and fixing of post top lantern with all connecting items (like suitable size of clamps, angle, nut & bolts) for holding of pipe with pole all as specified and directed.

S&F Steel tubular swaged poles type 410 SP-31 (9.00 metres long) complete with cast iron base plate, finial taper plug, bolts, nuts, screws and top cover, including bracket of suitable size for fixing of street light all as specified and directed including the following:- (a) Excavation & earth work, will be measured and paid separatly under relevent items. (b) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block/concrete collar with two coat of aluminium paint over a coat of red oxide primer, preparation of surface including painting of 30cm wide blue bands 3 Nos with synthetic enamel paint in alternate layer upto the height of 1.5m above plinth block. (c) Material and labour for writing letter or figures (Block, Roman, Italic as Indian) with thick synthetic enamel paint of approved shade not exc height in numbering of pole all as directed. (d) Drilling 02 Nos of holes to LT Pole (one hole near street light bracket and another near bus bar at bottom side) for insert of cable for street light.

S&F for decorative pole antiquely designed aesthetically appealing landscape cum street light (3.0 metres long) along with single arm hanging braket of suitable size made out from ERW pipe with base plate, finial taper plug, bolts, nuts, screws and top cover, suitable for fixing one Nos hanging light and testing all as specified and directed.

S&F for decorative pole antiquely celesta designed aesthetically appealing landscape cum street light made out from aluminium housing pole type (3.5 metres long) along with single arm hanging braket of suitable size made out from ERW pipe with base plate, finial taper plug, bolts, nuts, screws and top cover, suitable for fixing one Nos hanging light and testing all as specified and directed.

S&F for octagonal pole antiquely designed aesthetically appealing landscape cum street light made out from hot deep galvanised (7.00 metres long) along with single arm bracket of suitable size made out from galvanised pipe complete with base plate having holes for mounting on foundation finial taper plug, bolts, nuts, screws and top cover, suitable for fixing street light and testing all as specified and directed.

M&L PCC 1:3:6, type C1 (using 20mm graded crushed stone aggregate) for making foundation of poles all as specified and directed.

M&L PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) for making coping of Street light poles all as specified and directed.

S&F LED Hanging light Aluminium housing polymer defuser and pleasant lumin output IP -65 of capacity 40 watt LED of 6000k/3000k as per requirment on site including neccesary brackets made out from GI pipe of suitable size and shape complete testing on ground all as specified and directed.

S&F LED Post top lantern fitting of capacity 25 watts, 100 lumen per watt capacity of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

S&F for LED Post top gate light fitting of capacity 50 watts, 100 lumen per watt capacity of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

S&F LED Post top lantern haritage light fitting of capacity 18 watts, 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

S&F LED Post top gate light of capacity 30 watts, 100 lumen per watt IP 65 of 6000k/3000k with inbuilt Microwave motion technology for providing an energy efficient solution with auto dimming option from 100% to 25% of the rated wattage including necessary fixing arrangement all as specified and directed.

S&F LED BOLLARD light fitting of capacity 9 watts, 100 lumen per watt Mushroom shaped 600 mm, with B22/E27 bulb holders, suitable for LED Bulb with B22/E27 caps, with cast aluminium housing & polymer diffuser for pleasant light output.Weather proof. IP65. IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

M&L for painting external surface steel tubular poles 9 metre/ Decorative Poles 3 meter/ Octagonal Poles 7 meter long of any type complete and cross arm/bracket etc with two coats of aluminium paint and black paints in alternate strip upto 1.50 metre (each strip of 30 cm) with super enamel synthetic enamel paint from bottom and remaining portion shall be painted with two coats of aluminium paint of LT pole including preparation of surface and marking pole No all as specified and directed.

S&F LED street light fitting of capacity 90 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 100 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers all as specified and directed

S&F LED intelligent smart sensor based auto dimmable LED street lights with brightening / dimming options of 30 % to 100 % of the rated wattage on sensing of movement / occupancy, with in 8 meter radius fitting of capacity 90 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 120 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers all as specified and directed.

S&F LED intelligent smart sensor based auto dimmable LED street lights fitting with built in Dynamic Power Saving Device - DPSD that automatically switches off to 50% of the rated wattage on pre-set time interval of capacity 90 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 100 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers all as specified and directed.

S&F LED flood light fitting of capacity 150 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site all s specified and directed

S&F LED flood light fitting of capacity 100 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site all s specified and directed

S&F LED flood light fitting of capacity 50 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site all s specified and directed.

S&F LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minimum 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as directed by Engineer-in-Charge.

S&F LED intelligent smart sensor based auto dimmable LED building security light fittings with brightening / dimming options of 30 % to 100 % of the rated wattage on sensing of movement / occupancy, with in 8 meter radius fitting of capacity 45 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 120 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers all as specified and directed.

S&F LED building security light fitting 60 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minimum 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as directed by Engineer-in-Charge.

S&F LED intelligent smart sensor based auto dimmable LED building security light fittings with brightening / dimming options of 30 % to 100 % of the rated wattage on sensing of movement / occupancy, within 8 meter radius fitting of capacity 60 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 120 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6.3 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to 4 mm dia GI wire as earthing lead by means of bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering pipe 20mm dia medium grade with PCC chamber, MS funnel, wire gauge, CI cover with frame, 15 mm dia GI pipe light grade for protection of earth wire etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land, filling of charcoal and salt all as shown in electrical plate No. 3 of MES Sch Part I, connected to earthing test point, testing on completion all as specified and directed.

S&F LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 25 Sqmm X 4 core all as specified and directed.

S&F LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly , IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 16 Sqmm X 4 core all as specified and directed.

Supply and fix LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 10 Sqmm X 4 core all as specified and directed.

Supply and fix cable LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 10 Sqmm X 2 core all as specified and directed.

Labour only for taking out and checking of underground cable and relaying /rerouting the same cable of any size and any capacity including making servicable electric connections all as specified and directed.

S&F, testing and commissioning of multifunction timer switch digital 24 hour three phase complete with timer, contactor, and suitable rating MCB s for incoming and out going in built in suitable sheet metal enclosure panel and working in Single/Three phase integrated models of capacity 63 Amp all as specified and directed.

M&L for cutting existing hard standing by manual method, 0.45 m width and 0.6 m in depth for inserting galvanized tubing for cable protection, refilling the same after laying of pipe, with soil, stone aggregate, etc. as obtained from excavation, making good top surface with 100mm thick PCC (1:2:4), type BI (using 20mm graded crushed stone aggregate) and removal of excess material if any all as specified and directed.

S&F in repairs street light BEST pattern brackets suitable 410 SP-31 pole made out of GI pipe 50mm bore light grade 1.50 metre long bend to shape including welding, etc. with cap diameter suitable to SP-31 pole to required shape and necessary nut bolt washer, including two coats of synthetic enamel paint over a coat of red-oxide primer all as directed and specified.

S&F in repairs street light brackets made out of GI pipe 40 mm bore light grade 1.50 metre long bend to shape including welding etc and two sets of clamps made out of MS 40mm x 5mm bent to required shape and necessary nut bolt washer, including two coats of synthetic enamel paint over a coat of red-oxide primer all as directed and specified.

Labour only for cutting small bushes of trees around two metre radious of street light fitting serviciability checking of street light fitting, for each pole of street lights all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m depth and getting out in hard/dense soil for laying of cable/ GI pipe all as specified and directed.

Returning, filling in including spreading levelling watering well ramming in layers not exc 25cm thick each layer all as specified and directed.

Removing surplus soil to a distance outside MD land and depositing nexc. 50m where directed at a level not exceeding 1.5m above the starting point all in including removing balance debries from MD land all as specified and directed.

Supply and laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 50mm dia for laying of cable protection complete to walls/ trenches/floor/ceilings all as specified and directed by Engineer-in-Charge.

Supply and laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 25mm dia for laying of cable protection complete to walls/ trenches/floor/ceilings all as specified and directed by Engineer-in-Charge.

S&F in repairs of LED security light timer switch 24 Hour digital type suitable for 63 Amp 3ph all as speified and directed.

Material & Labour for repairs/ Overhauling/Servicing to existing high mast of any size including following activities (i) Tightening the loose connections, cleaning and greesing inside/out side complete by applying repair to broken nut bolts, motor, ropes and balancing the fittings at top of high mast after the completion of servicing up to the satisfication of Engr-in-charge all as specified and directed . Note : motor, rope, cables measured and paid separately under relevant items of this schedule.)

S&F in repairs steel rope of size 10 mm dia including all fittings like dog clamps and fixed complete to high mast for the purpose of vertical movement of brackets all as specified and directed.

S&F in repairs multi stranded FR Copper conductor cable of size 4 Sqmm 6 Core for flood light fittings and connecting up all as specified and directed.

Supply, installation testing and commissioning in repairs for Electric Induction Motor AC of capacity 0.55 KW / 0.75 HP, 3 Phase, type 2HCI Copper wound 870 RPM complete with tougle switch of suitable capacity and necessary small Winch gear, chain suitable size and tested for smooth functioning for vertical up and down movement complete all as specified and directed.

S&F in repairs LED security light contactor switch of 63Amp 3ph 4P suitable for 63 Amp 3ph timer all as speified and directed.

S&F in repairs of LED security light MCB of 63Amp 3ph 4 p suitable for 63 Amp 3ph timer all as speified and directed.

S&F in repairs of LED security light driver suitable for 15 watt to 40 watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

S&F in repairs of LED security light driver suitable for 50 watt to 100 watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

S&F in repairs of LED security light driver suitable for 100 watt to 200 watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

M K ENTERPRISES

NOEL ENGINEERS

N.S.ENTERPRISES

Vandan Enterprises

Bidder Name

Vandan Enterprises

NOEL ENGINEERS

shree arihant constrution

M K ENTERPRISES

N.S.ENTERPRISES