MAINTENANCE OF BUILDING AND INTERNAL SERVICES AND

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.

Petty repairs to joinery works such as easing of doos, windows, kitchen cabinets, refixing builder hardware gauage, etc, by providing glue, nails and screws to the satisfaction of user and rectifying other misc minor carpentary works directed by the Engineer-In-charge.

Petty repairs to plumbing / internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low levelled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union, etc as required at site and as directed by the Engineer-In-Charge.

Petty repairs to aluminium joinery works such as aluminium windows, aluminium ventilators and like similar works auch as easing of doors, refixing of doors, windows, refixing builder hardware such as aluminium beeding, etc., as required at site and as directed by the Engineer-In-Charge.

M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick Screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick Screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mrtar 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for Granite (of any type) slabs/tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20mm thick Screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick Screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-Charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), door and window frames with shutters and refixing the same in other opening without damaging the door/windows etc complete all as specified and directed by Engineer-in-Charge. If damage the asset by the contractor, the same will be repair and remake the same without any extra payment complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used and edges will be painted to match with printed sheet including reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading. colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 75 mm long butt hinges extruded Aluminium alloy with galvanised mild steel hinge pin, bright polished Type B-21 fixed to PVC door with screws complete all as specified.

S&F 150mm long Aluminium anodised barrel tower bolts of extruded section fixed to PVC door with screws complete all as specified.

S&F 150 mm long Aluminium anodised handles extruded section fixed to PVC door with screws complete all as specified.

Taking Down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each and refixing in other opening without damaging the door including cutting the door bottom for adjusting of height if required, etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each and refixing the same opening without damaging the door including cutting the door bottom for adjusting of height if required, etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of aluminium door shutters exc 1.00 sqm and n exc 2.00 sqm each and refixing the same opening without damaging the door by adjusting the bottom of door adjusting of height by cutting of Glass/Board etc. as required, including material and labour for joining cleats glazing clips, rubber neoprene packing , handle, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed by Engr-in-Charge.

Taking Down shutters of any description exc 1 Sqm but n.exc 2 Sqm each etc. complete all as specified.

S & F powder coated anodised alluminium door shutters, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber neoprene packing , handle 2 Nos in each door, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed by Engr-in-Charge.

S & F Powder coated anodised alluminium window and ventilator shutters sliding type without sash bar, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber packing , anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge.

Provision of 5.5 mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to alluminium frame works with rubber beadings etc. Complete all as specified and as directed by Engr-in-Charge.

S&F for 12mm thick both side choice laminated prelaminated particle board for insulation purpose, fixed to aluminium framework, complete all as directed by Engr-in-Charge.

S&F in repairs , Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed including takingdown existing one etc complete.

S&F in repairs floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor , complete all as specified and directed.

S&F in repairs Aluminium Mortice lock of 4 levers in vertical type of size 100 mm

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed

S&F sheet glass ordinary quality 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge.

S&F sheet glass ordinary quality 4mm thick in squares exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge.

S&F figured glass, pinhead type 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames , complete all as directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed.

S&F false ceiling grid of size 600 x 600 mm system using hot dipped galvanized steel section with precoated capping, main tee of size 24x32 mm having 0.27mm thick at every 1200mm centre to centre, cross tee of size 24x27 mm having 0.25mm thick at 600mm centre to centre and wall angle of size 19x19 mm having 0.35 mm thick fixed to the periphery of the wall, and suspended at every 1200mm centre to centre in both directed using 2.00 mm thick GI wire and supply & fixing 600 x 600 x 16 mm mineral fibre tegular edge ceiling tiles of RH90 complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store.

Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as directed by Engr-in-Charge.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as directed by Engr-in-Charge.

S&F in repairs Vitreous china wash down water closet pan (pedestral pattern) white excluding fixing bolts, flushing cistern and flush pipe but including fixing charges, complete all as directed by Engr-in-Charge.

S&F in repairs Single piece Vitreous china wash down water closet pan (pedestral pattern) fixed on floor/wall with flusing arrangements including fixing bolts, flushing cistern and flush pipe but including fixing charges/ instalations, complete all as directed by Engr-in-Charge. Make : CERA Model : CASCADE or equivalent in HINDWARE/PARRYWARE/PARYAG

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed by Engr-in-Charge.

S&F in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specified and directed.

S&F in repairs 32mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalve float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern, all as specified and directed.

Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.

S&F in repairs chromium plated Fancy type 15mm bore Pillar taps, cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as directed by Engr-in-Charge.

S&F in repair chromium plated 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repair Chromium plated 15mm dia bore Brass mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs toilet paper holder fixed to walls with chromium plated brass screws, complete all as specified and directed.

S & F in repair chromium plated Stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 Gms)

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.

S&F in repair chromium plated soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed.

S&F in repair 100mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified.

S&F in repair waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms . complete all as directed by Engr-in-Charge.

S&F in repair waste coupling of PTMT (half or full threaded) (minimum weight 40mm-45gms complete all as directed by Engr-in-Charge.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm.

S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed

Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) of 75mm thick as in plinth protection complete all as specified and as directed by Engr-in-Charge.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc

Rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

Rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement.

Dismantling water tanks capacity exc 500 n.exc 1000 litre and removing to store etc. complete all as directed by Engr-in-Charge.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks ISI MARKED (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks ISI MARKED (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F in repair round moulded PVC water tank lid for 500 litres / 1000 litres, complete all as specified and directed.

S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete.

S & F in repair 25mm bore valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum wieght for 25mm-455 grams as in repairs , complete all as directed by Engr-in-Charge.

S&F in repair 16 mm bore CPVC gate/Ball valves complete all as specified.

S&F in repair 20 mm bore CPVC gate/Ball valves complete all as specified.

S&F in reparis 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed unions etc. complete all as specified.

Disconnecting existing tanks capacity exc 250 n.exc 500 litre, setting aside (lowering if required) for repairs and cleaning and removing all scale and dirt by using chemicals etc from tanks and form mouths of circulatory pipes and hoisting if required and refixing in position, complete all as directed by Engr-in-Charge.

Disconnecting existing tanks capacity exc 500 n.exc 1000 litre, setting aside (lowering if required) for repairs incuding cleaning and removing all scale and dirt by useng chemicals etc from tanks and form mouths of circulatory pipes and hoisting if required and refixing in position, complete all as directed by Engr-in-Charge.

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Supply and fixing of 04 piece 3.5 feet each weight1.6 kg, wall mounted stand consisting of four anodized aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm, mounted on anodized aluminium angle of size 40x40x3 mm complete all specified and directed. Make:- EASY DRY SYSTEMS PRIVATE LIMITED (EDSPL) Product- MOUNT IT 14 (WALL STAND)

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint including one coat of Birla white putty etc. complete all as specified.

Removing building materials etc. to a distance of 5 Km out side MoD/Unit land including loading, unloading and stacking at the destination etc. complete all as per direction of Engineer-in-charge,

Material and Labour for cleaning of sewer lines from Manhole to Manhole of any depth and dia of pipe including testing sewer line by pouring water complete all as directed by Engr-in-Charge.

Cleaning of Manhole Upto 2m depth, any size and any depth including taking out sludge, sewer water, any other materials etc and disposal of the same outside MD land complete all as directed by Engr-in-Charge. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 1 month.

Cleaning of Manhole Exc 2m but not exc 4m depth, any size and any depth including taking out sludge, sewer water, any other materials etc and disposal of the same outside MD land complete all as directed by Engr-in-Charge. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 1 month.

Excavation in trenches for exposing the sewage line and breaking SGSW pipe horizontally on top to help cleaning the sewer line from Manhole to the location where the SGSW pipe is broken and covering the broken portion of SGSW pipe from the top and sealing the opening in CM (1:3) including returning filling and ramming in trenches with excavated earth and disposal off surplus earth to a distance not exceeding. 50 m complete all as directed by Engr-in-charge (irrespective of depth and type of soil).

Cleaning blockages from Nahani trap to Gully trap by Roding etc and cleaning the sludge from nahani trap taking up and refixing the grating in cement mortar (1:3) including testing by pouring the water until smooth flow, complete all as directed by Engineer-in-charge. Note:- Payment of blockage shall be paid again to the nahani trap if the blockage occurs after the interval of 15 Days.

Cleaning of blockages from Gully trap to 1st Manhole length of sewer line not exceed 5m by roding etc and cleaning all sludge from Gully trap to 1st Manhole including pouring water until the smooth flow and necessary earth work and disposed of sludge etc complete all as directed. Note:- Payment of blockage shall be paid again to the Gully trap if the blockage occurs after the interval of 15 Days.

Cleaning blockages from water closet including cleaning the soil pipe (for 1St and 6th floor) by removing the access door cover in the bend and refixing it after cleaning the pipe, pouring water until smooth flow including necessary earth work and making good damages if any to plinth protection Manhole etc., all as directed. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 15 Days.

Demolition of existing SWSG gully trap including PCC kerb etc and supply and fix SWG gully trap square mouthed 100mm size set in PCC (1:3:6) type C1 block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in cement mortar (1:1) including 100x150mm high PCC kerb in (1:2:4) type B1 with CI perforated grating 150x150mm bituminous coated including disposal of waste/sludge complete all as directed.

Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and supply and fix PVC floor/Nahani trap in existing pipe and embedding in cement mortar (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor complete all as directed.

Removing / Bailing of sewage water from the septic tank of various capacities and disposal outside MD land including cutting and removing all vegetable growth plants etc in around septic tank and filter bed etc and removing debris outside MD land.

Removal of sludge/disposal/sediment from septic tank of various capacities and disposal the same outside MD land including cutting and removing all vegetable growth plants etc including uprooting of small plants around septic tanks and filter beds and etc and removing debris outside MD land.

Removal/taking out of sludge muck consisting of loose aggregate sediments mud etc from filter bed and refilling the same after cleaning/washing into the filter bed.

Cleaning of blocked sewage drain pipe of any dia by Mechanical method/ pressure jet machine till flow of sewage/ sludge water is smooth including taking out all sludge/silt/liquid/ mud from the man holes & removing and disposal of the same at out side of the MoD/Unit area land including taking out MH covers carefully and refixing the same as per existing pattern all as directed by Engr-in-Charge

Excavation in trenches not exceeding 1.5m wide and n. exc. 1.50 mtr deep and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches but exceeding 1.5m deep and not exceeding 3.00m deep getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge..

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick each in hard/dense soil complete all as specified and as directed by Engr-in-Charge.

Removing excavated soil to a distance exceed 50m and not exceeding 100m and depositing where directed at level not exceeding 1.50m above the starting point complete all as specified and as directed by Engr-in-Charge.

Demolition and breaking up drain pipe (salt glazed stone ware) set in Cement Mortar, 150mm bore and getting out from trenches.

Cutting into existing Main Hole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete PCC (1:2:4) type B1, smooth finished and reforming benching as required internal dia of pipe 150mm complete all as specified and as directed by Engr-in-Charge.

Material and Labour for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed in CM (1:1) and tested complete all as specified and directed

Material and Labour for PCC (1:3:6) type C-2 for bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as directed.

Material and Labour for forming fair finish to channel in manholes using extra cement.

Material and Labour for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate in foundation complete all as specified and as directed by Engr-in-Charge..

Supply only water proofing compound.

Removing building materials etc. (other than spoil Earthwork) to a distance of 5km or under (within or outside MoD land), beyond the lead included in the rates, including loading, unloading and stacking at the destination, etc complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet pan (pedestral pattern) white excluding fixing bolts, flushing cistern and flush pipe but including fixing charges, complete all as directed by Engr-in-Charge.

S & F in repair Vitreous Ware wash down water closet (Pedestal), white including flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device etc complete all as specified and as directed

VARALAKSHMI CONSTRUCTIONS

Siddivinayaka Constructions