ADDN/ALTN TO BLDG NO P-35 AND 36, PROVN OF ADDITIONAL ROOM, SPL REP TO EM SUPPLY AND SHED FOR 320 KVA DG SET AT 4AFSB VARANASI UNDER GE AF STN GORAKHPUR

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for. Complete all as specified and directed

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quains, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed

Demolition of reinforced cement concrete is reinforced (reinforcement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as sspecified and as directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / soil complete all as specified and directed .

M&L for PCC (1:4:8) Type D-2 using( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete compete all as specified and directed.

M&L Brick work with subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed

M&L for brick work with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls, built CM in 1:4 complete all as specified and directed.

M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, lintel band etc basement slabs, under- reamed piles and mass concrete complete all as specified and directed.

M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in columns complete all as specified and directed.

M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in chhajja complete all as specified and directed.

M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in lintel over 1.5m span complete all as specified and directed.

M&L for RCC Nominal mix type B-1 (1:2:4) using (20 mm graded stone aggregate ) as in Slabs supported on walls, beams and columns in floors, roofs beam, landings, balconies, canopies, deck slabs and in the shelves etc complete all as specified and directed.

M&L for RCC Nominal mix Type ype B0, 1:2:4 (12.5mm graded aggregate) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span . Complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

Formwork to flats rough finish surface of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, lintel band and similar work; vertical or to batter complete all as specified and directed.

Formwork to flat rough finish surface of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed

Formwork to flat rough finish surface soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finish surfaces complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. Complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions (WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make :- Dr Fixit Pidiproof LW+ or equivalent in specified make

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick rendering on concrete surfaces such as sides of roof beams, soffits of roof slab (ceiling )etc in CM 1:3, finished fair & smooth without using extra cement all as specified and directed .

M&L for 10mm thick rendering on fair faces of brick work or on concrete surface in CM 1:3 finished surface even and smooth without using extra cement, mixed with liquid water proofing compound @ 100 ml per 50 Kg of cement bag complete all as specified and directed. Note : WPC will be measured and paid separateiy.

M&L for roof treatment for in accessible / accessible roof including cleaning the the roof surface and applying bituminous primer @ 0.20 kg per sqm , providing and laying 4 mm thick APP water modified water proofing membrane not less than 4 kg per sqm reinforced with non woven polyster mat weighing not less than 800 N per sqcm trearing not of 180 N (by torch application method) with minimum of 10 cm side laps and 15 cm end laps by application of torch applying a coat of blown grade hot bitumen 90/15 grade over the membrane @ 1.20 kg /per sqm complete all as specified and directed

M&L for two coats of oil bound distember on walls surfaces over a coat of primar over 2 mm thick wall care putty after complete all as specified and directed.

M&L for three coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed at site.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for Hardcore of broken bricks guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed

M&L for 100 mm thick cement concrete Type B-2 (1:2:4) using( 40mm graded stone aggregate ) as in sub base of floor compete all as specified and directed.

M&L for 25 mm thick cement concrete type B0 (1:2:4) using 12.5 mm stone aggregate as in sub base of floor tile all as specified and directed by Eng-in-Charge.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed

M&L for rendering 10mm thick in CM 1:3 CM for dado / skirting on brick work finished fair and smooth for receiving tiles in vertical surfaces all as specified and directed

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) et complete all as specified and as specified and directed

M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed

M&L 15 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes neat cement slurry with 3.00 kg of cement per sqm complete all as specified and directed.

M&L for vitrified ceramic colours tiles 10 mm thick in light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic colours tiles 10 mm thick in light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 1:6 cement screed 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (joint thickness not to exceed 1mm)

M&L Kota stone slab 20-25mm thick in, skirting laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete

M&L for cement concrete type C-2, 1:3:6, 75 mm thick (40mm graded aggregate) as in plinth prtection complete all as specified and as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F steel water tubing 15mm bore medium grade galvanised with all fittings such as bends, tees, nipples, elbows, reducers, etc fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F steel water tubing 20 mm bore medium grade galvanised with all fittings such as bends, tees, nipples, elbows, reducers, etc fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F CP Grating 150 mm size complete all as specified and directed.

S&F PVC (SWR) P/S trap 125/110 mm,setting and jointing with solven tcement, complete all as specified and directed at site.

M&L 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement, complete all as specified and directed at site.

S&F Vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed at site.

S&F vitreous china wash down water closet pan (pedestal pattern with including trap, seat cover, including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified and directed.

S&F Vitreous China wash basin white, flat back, including brackets size 550x400 mm complete all as specified and directed.

S&F 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F PVC waste pipe 32mm dia, 60 cm long for WHB/Urinal with long screw shanks and fly nuts, flanges end bedded in red lead cement and other fixed complete.

S&F 15mm bore bib taps, cast cpper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe fixed in repairs all as specified and directed . Make - Essco or equivalent

S&F brass chromium,Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 15mm, Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm, Stop valves, angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F Rotational moulded polyethylene 500 Ltr water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in white colour complete all as specified and directed.

M&L for cement concrete Type B-1, 1:2:4 (20mm graded stone aggregate) in roof for base of water storage tank complete all as specified and directed.

S&F soap dish, vitreous china white, approximate size 160X160X90 fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.

S&F in 15mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.

S & F ball brass valves high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm bore , complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends any radius for 110 mm bore provided with access door mplete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia mplete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 75mm PVC (SWR) bends anyradius mplete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 75 mm dia mplete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe 110mm dia and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm crushed stone aggregate ) surface smooth finished and reforming benching as required for internal dia of pipe 100mm complete all as specified and as directed.

Taking down chowkhats and frame but n.exc 1.5 Sqm each with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified.

Taking down chowkhats and frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Door closer hydraulically regulated, (Aluminium extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [ Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area not exceeding 2.00 sqm each

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded mplete all as specified and as directed.

S&F 5mm figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane mplete all as specified and as directed.

S&F 4.8mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane mplete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Pressed steel frame size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.omplete all as specified and directed

M&L Flush shutters, 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer of any description exc 10 cm width or girth complete all as specified

M&L PCC (1:3:6) type C1 as holdfast block, door frame filing, coping, bedblock etc complete all as specified and directed

S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed

S&F 150mm, aluminium anodised, barrel tower bolts of extruded section and fix complete all as specified and directed.

S&F 150 mm Aluminium handles , cast type, anodisedetc.complete all as specified and directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and appiying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for providing reinforced concrete (1:2:4), type B-1, (using 20mm graded stone aggregate) as in drain cover set in cm (1:4) complete all as specified & directed.

PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate ) in benching and the like including weathering,slightly rounded or chamfered angles and throating as directed and necessary formwork complete all as specified and as directed .

M&L PCC 1:3:6 type C-2 ( using 40mm graded aggregate ) surface channel and drains , complete all as specified .

M & L for rendering 15mm thick in cm 1:4 on brick work/concrete surface, finished event smooth with using extra cement complete all as specified.

S&F plain mild steel wire, in fencing including straining and fixing to wood, concrete or steel posts , angle iron and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured)

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 75 mm PCC (1:2:4 ) type B2 using 40 mm graded aggregate as in floors,hard standing, sub base floor finished the surface even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal whilst the concrete is green..

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar mplete all as specified and as directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing mplete all as specified and as directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

S&F steel almirah on wall with 4 Nos 10 mm dia 100 mm long fasteners all as specified and directed almirah shall be of size 760 mm long, 440 mm wide and 900 mm high made of 1 mm thick mild steel sheet, Front shutter shall have two levees. A steel chromium plated handle shall be provided to the shutter.Handle shall be 100 mm long.A three way locking device shall be provided to front shutters.Each leave of front shutter shall be hinged with two numbers butt hinges 15 mm long and shutters shall be side hung, specification all as per FD 1032. and as per sample kept in AGE (AF) Varanasi. Fixing shall be done as directed by engineer-in-charge with standard workmanship. All steel surfaces shall be spray painted with standard workmanship. All steel surfacs shall be spray painted with two coats of synthetic enamei paint over one coat of primer after preparation of steel surfaces complete all as specified and directed.

S&F in repairs Stainless steel wirecloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. mplete all as specified and as directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50

S&F 18 mm thick HDMR (High density high moisture resistance) board of grade 1 quality make: Green ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finish mica of approved quality make :- Century or as approved by GE Fixed with screws, solvent cement/adhesive to make cupboard shutters, sides, top and bottom, shelves inside the cabinet and shutter or drawer including taking down of old shutters, sides top bottom. complete all as specified and directed.

S&F 75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter Make:- KAFF complete all as specified and directed.

S&F SS Designer Thali/Plate Comb of size 380x400x200mm make of Sleek (code-ASSTT380405200) or equivalent complete all as specified and directed.

S&F SS Designer Cup and Saucer basket of size 380x400x100mm make of Sleek (code-ASSTT380405100) or equivalent complete all as specified and directed.

S&F SS Perforated Curtlery basket of size 380x500x100mm make of Sleek (code-ASSTT380500100) or equivalent complete all as specified and directed.

S&F SS designer Basket of size 380x400x200mm make of Sleek (code-ASSTT380500100) or equivalent including dismantling of old basket .complete all as specified and directed.

S&F SS Grain Basket Trolley with bracket of size 360x505x230mm make of Sleek (code-ASSGBT360505230) or equivalent including dismantling of old basket complete all as specified and directed.

S&F SS dustbin-14 Ltr code-IHISG 2154, make of Sleek or equivalent as approved by GE. complete all as specified and directed.

S&F stainless steel handles of 150 mm size for kitchen cabinet shutter/drawer complete all as specified and directed.

S&F CP SS telescopic channel 20'' long, zink (35Kg) make- Sleek (Asian paint) code-HICH-1356) or equivalent dismantling of old telescopic channel .complete all as specified and directed.

S&F steel work in tubular Post/ trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 including all necessary work as directed by Engr in Charge. Complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any Green having tensile strength of 550 Mpa as in roof covering/cladding/drain to wall, fixed with self tapping screws as specified.

S&F steel windows or ventilators,Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.Complete all as specified and directed.

S&F figured glass,4mm thick, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane. Complete all as specified and directed.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: gear operated type with bevel gear box and crank handle. Complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc .15cm thick, spread, levelled and rammed including watering. Complete all as specified and directed.

M&L for cement concrete 75mm thick, Type D2, 1:4:8, 40 mm graded aggregate as in sub base of floor. Complete all as specified and directed.

M&L for cement concrete 40mm thick,Type B1, 1:2:4, 20 mm graded aggregate as in floor finishes.Complete all as specified and directed.

M&L for cement concrete 75mm thick, type C2, 1:3:6 (20 mm graded aggregate) as in plinth protection.Complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' .Complete all as specified and directed.

Providing precast cement concrete louvres and jallies,Type B0, 12.5mm graded aggregate set in cement mortar 1:4, 25mm thick (measured solid), including all mouldings but excluding frame. Complete all as specified and directed.

Surface dressing n exc. 15 cm deep in soft/loose soil. Complete all as specified and dircted.

M&L for Cement concrete Type B1, 1:2:4, 40 mm graded in foundations, filling and mass concrete.Complete all as specified and directed.

M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.

All as per item No 140 above but one 3/5 pin socket out let 5 amp on same board with other switches.

All as per item No 140 above but socket 5 amp on independent board.

All as per item No 140 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size.

All as per item No 140 above but socket out let 3/6 pin 15 Amp with 4 sq mm size copper conductor for power point on indipendent board.

Supply & Fixing switch modular single pole, one way 6 Amp ,01 module, complete all as specified and directed at site.

Supply & Fixing switch modular bell push 6 Amp ,01 module, complete all as specified and directed at site.

Supply & Fixing switch modular single pole, one way 16 Amp ,01 module, complete all as specified and directed at site.

Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module, complete all as specified and directed at site.

Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module, complete all as specified and directed at site.

Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete.

S&F Modular electronic type step fan regulator, 120 W-2 module, complete all as specified and directed at site.

Supply & Fixing lamp holder PVC / Ploycarbonate type, complete all as specified and directed at site.

Supply & Fixing LED lamp 9 Watt , complete all as specified and directed at site.

Supply & Fixing call bell music type, complete all as specified and directed at site.

Suply and fixing engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 36 W .Make Havells/ Bajaj /Crompton.

Suply and fixing in replacement engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 20 W .Make Havells/ Bajaj /Crompton.

Supply & Fixing integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size. Make Philips / Bajaj / Crompton / Havells.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply & fix exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including breaking necessary hole in wall for fixing the exhaust fan and making good to disturbed surfaces with cement mortar to match with existing after commissioning .

M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 4.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC conduit complete all as specified and directed.( Note - two runs of 6 sq mm single core copper conductor and one runs of 4.0 Sq mm copper conductor shall be measured as one unit length.)

Supply & fixing earth plug enclosure (plug and socket ) with MCB, SP 20 Amps, complete all as specified and directed at site.

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 12 way, complete all as specified and directed at site.

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way, complete all as specified and directed at site.

Supply & Fixing MCB SPN 32 Amps 240 volts, 10 KA, "C" curve, complete all as specified and directed at site.

Supply & Fixing MCB SPN 40 to 63 Amps 240 volts, 10 KA, "C" curve, complete all as specified and directed at site.

Supply & Fixing MCB SP 5 to 32 Amps 240 volts, 10 KA, "C" curve, complete all as specified and directed at site.

Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size upto 50 Sq mm 3.5/ 4 Core. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 35 Sqmm 3.5 core.

All as per item No168 above but size 50 Sqmm 3.5 core, complete all as specified and directed at site.

Excavation in trenches n.exc. 1.5 m deep and n.exc.1.5 m wide in any type of soil and forming bottom surfaces for laying of cable/water pipe line complete all as specified and directed.

Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected.

Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.

Returning filling in including spreading leveling watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removal surplus soil at a distance n. exc. 50 m and deposited where diredted at a lavel not exc. 1.50 m above the starting pont complete all as specified and directed.

Labour for boring, holes for inserting of 50 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deep complete all as specified and ditected.

M & L GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L GI pipe 50 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

Taking down existing old defective LT Panel / FP Box by disconnectiing its all elecetrical connections and by dismentelling foundation complete all as specified and directed at site by Engr-in-Charge.

Supplying,installation,testing,commissioning of LT panel board 3 phase 4 wire system indoor type factory made wall mounting with suitable clamp or fasteners dust and vermin proof cubical type interlocking arangement ( IP- 55 protection) fabricated with 2 mm thick CRCA sheet with Anti corrosion coating & finally polyester powder coated of finite green colour, & providing with suitable size of aluminum stripfor earth connection all as specified for the following:- (a) Incoming :- (i) MCCB 160 AMPS 4 pole 415 Vollts 35 KA -01 No. (ii) Digital type amp meter 0-200 Amp with CT's 03 Nos. (iii) Digital type voltmeter 0-500 Volts -01 No. (iv) Indicating lamps (RYB) 01 set of 3. (v) Copper bus bar rating 300 Amps 3 phase neutral-01 set (vi) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCB TPN 63 Amps 240 volts, 10 KA, "C" curve -04 No.

Supplying,installation,testing,commissioning of LT panel board 3 phase 4 wire system indoor type factory made wall mounting with suitable clamp or fasteners dust and vermin proof cubical type interlocking arangement ( IP- 55 protection) fabricated with 2 mm thick CRCA sheet with Anti corrosion coating & finally polyester powder coated of finite green colour, & providing with suitable size of aluminum stripfor earth connection all as specified for the following. (a) Incoming :- (i) MCCB 100 AMPS 4 pole 415 Vollts 25 KA -01 No. (ii) Digital type amp meter 0-200 Amp with CT's 03 Nos. (iii) Digital type voltmeter 0-500 Volts -01 No. (iv) Indicating lamps (RYB) 01 set of 3. (v) Indicating lamps (RYB) 01 set of 3 (vi) Copper bus bar rating 300 Amps 3 phase neutral-01 set. (vi) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCB TPN 63 Amps 240 volts, 10 KA, "C" curve -02 No.

Supplying,installation,testing,commissioning of outdoor type LT panel board 3 phase 4 wire system ,415 Volts ,50 Hz factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not les than 100 micronsof finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :- (a) Incomming :- (i) On load changeover switch 200 AMPS 4 pole 415 Vollts -01 No. (ii) MCCB 200 AMPS 4 pole 415 Vollts 36 KA -01 No. (iii) Digital type amp meter 0-300 Amp with CT's 03 Nos. (iv) Digital type voltmeter 0-500 Volts -01 No. (v) Indicating lamps (RYB) 01 set of 3. (vi) Aluminium bus bar rating 300 Amps 3 phase neutral-01 set. (vii) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 125 AMPS 25 KA 415 Volts 4 pole -02 No. (ii) MCCB 63 AMPS 16 KA 415 Volts 4 pole -01 No.

Supplying,installation,testing,commissioning of AMF control panel suitable for 320 KVA Kirlosker make DG Set, factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not les than 100 microns of finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :- (i) MCCB 630 A ,4P, 50 KA, 415 Volt AC,50 Hz. - 02 Nos . (ii) Power Contactor, 700 A ,4P,operating coil voltage 240 V AC. - 02 Nos. (iii) VAF Meter with CTs 200/5A 15 VA- 01 Set. (iv) LED indicator lamp ( R,Y,B & G ) -01 Set. (v) AMF controller - 01 No. (vi) Battery charging system complete with DC volt meter , DC amp meter indicating lamp,switches,fuses,charging lead - 01 set. (vii) DG start/ stop push button and emergency stoop push button. (viii) Copper Bus bus bar rating 300 Amps 3 phase neutral-01 set, and all other necessary accessories recommended and required by manufacturer such as cranking relay pla relay auxiliary contactor indicator lamp and MCB etc and including complete control wiring between AMF panel and DG set.

Supply, erecting and fixing in true vertical position steel tubular swaged pole 8.5 Mtr long type (410 SP -22) conforming to IS 2713 part I & III - 1980 complete with cast iron base plate, pole cap, mild steel, bolts, nuts and screws, welded and reduced section and longitudinal weld seam throughtout entire length of pole including two coats of black bituminous paint throughtout internally and externally upto planting depth and remaining exterior portion of pole with two coats of aluminium paint over a coat of red oxide primer complete including transporting the poles to plating & providing three bends/strap with paint red signal/post office colour 300 mm apart from plinth block & numbering of poles complete all as specified and directed and including foundation with the following : (a) Excavation in post holes in any type of soil , return filling, well ramming and disposal of surplus soil to a distance not exceeding 50 mtrs from the starting point. (b) PCC (1:3:6 ) type C2 using 40 mm graded stone aggregate as in foundation. (c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping , including necessary form work.

M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

Taking up CI water mains of 80 mm dia including all fittings with spigot and socket ends and lead joints including buring out joints and recovering lead, removal to MES store yard all as specified and directed by Engr-in-Charge.

All as per item No. 185 above but size 150 mm dia .

Material & laying , fixing in trenches cast iron pipe with spigot and socket ends centrifugally cast class " LA" in any length 80 mm bore all as specified and directed. ( run lead joint shall be measured and paid for separately.)

All as per item No. 187 above but size 150 mm dia .

Supply and fix in replacement sluice valve of 80 mm dia ISI marked with cast iron body bonnet wedge stuffing box galvanized thrust plate band plate wheel of gry cast iron ,operated with heigh tensil brass spindle, wedge body seal ring and wedge facing lead tin brass bolt and nut compressed fiber bolt pressured rating PN-I confirmed to 14846 including material and labour for jointing flange joint with rubber / fiber jointing ring bolt nut and washers etc complete all as specified.Make Remco/ Kirlosker/BIR.

All as per item No. 189 above but sluice valve of 150 mm dia .

Supply and fix CI reflux ( non return ) valve 150 mm bore as per IS 5312 with GM working parts both ends flanged and suitabely machined and drilled for and including required nut , bolts washer rubber/ fiber packing complete all as specified and directed. Make Remco/ Kirlosker.

S & F CI fittings for spigot, socket pipes such as, bends( any type radius and angle) , tapers any type (straight bends in increasing , decreasing or double socket etc.) Tee pieces ,single branch, 'Y' junctions , double branch, cross ( all sockets or socket and spigot), collars , caps and plugs suitable up to 150 mm bore complete all as specified .

All as per item No.192 above but fixing only.

M & L for run lead joints for spigot and socket CI pipe and fittings for the 80 mm bore sizes

All as per item No. 194 above but for size 150 mm bore

Taking up GI steel water tubing from the tranches by necessary excavation or on wall / laid under floor/ ceilings with complete fittings,any grade, removal to MES store yard all as specified for 50mm bore size.( excavation and earth work shall be measured and paid separately.)

All as per item No. 196 above but for size 40mm bore, complete all as specified and directed at site.

All as per item No. 196 above but for size 25 mm bore, complete all as specified and directed at site.

All as per item No. 196 above but for size 20 mm bore, complete all as specified and directed at site.

All as per item No. 196 above but for size 15 mm bore, complete all as specified and directed at site.

Supplying and laying steel water tubing medium grade galvanised with all fittings like bend, tees socketes union etc. as required laid in trenches/ or on wall / laid under floor/ ceilings complete all as specified of the 50mm bore size.

All as per item No. 201 above but for 40mm bore, complete all as specified and directed at site.

All as per item No. 201 above but for 25 mm bore, complete all as specified and directed at site.

All as per item No. 201 above but for 20 mm bore, complete all as specified and directed at site.

All as per item No. 201 above but for 15 mm bore, complete all as specified and directed at site.

Supply and fix in replacement gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipes suitable for 50 mm bore dia of pipe.

All as per item No. 206 above but for 40mm bore, complete all as specified and directed at site.

All as per item No. 206 above but for 25 mm bore, complete all as specified and directed at site.

All as per item No. 206 above but for 20 mm bore, complete all as specified and directed at site.

M & L straight plain brass ferrules ( or connnecting screws ) screwed both ends and fixed for the 25 mm bore diameter of pipe.

All as per item No. 210 above but for 20 mm bore, complete all as specified and directed at site.

S & F chromium plated fancy type bib taps,cast copper alloy with crutch or butterfly handel,screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore dia of pipe complete all as specified and directed.

Dismenteling and taking out complete assyembly of submersible pump set of 35 HP capacity of any make from the existing bore including column pipe of size 150 mm bore flanged type ( ERW steel pipe) with jointing material i.e. rubber packing ,nuts , bolts and washer etc. by using T & P required for the purpose complete in all respect as directed by Engineer-in-Charge. (Note :- Column pipe of size 150 mm bore flanged type will be reuse for the purpose of lowering new submersible pump after necessary cleaning )

Development of existing bore well by means of 250 PSI Air compressor for not less than 08 hrs under dirctiions of Engineer - in - Charge complete all as specified and directed.

Development of tube well by over pumping until clear discharge is met., complete all as specified and directed at site.

Supply , installation / lowering and commissioning the submersible pump set with strove lined non return valve directly coupled with and including induction motor of 35 HP capacity for operation on 415 Volts +/- 10% , three phase , 50 Hz & pump having 5 stage complete with necessary accessories specified by manufacturer , suitable for 1450 LPM discharge of water at 75 meter head all as specified and directed. Make-Penguin / KSB / CRI /Crompton . (Note :- rates are also deemed to be inclusive for lowering of column pipe of size 150 mm bore flanged type & M&L for new jointing material i.e. rubber packing ,nuts , bolts and washer etc.)

Supply, connecting and testing (in replacement or for extention) of PVC insulated and sheathed water proof cable wih standard copper conductor flat submersible cable 1100 V grade complete all as specified for cross section area of 25 Sqmm 3 core.

Supply and lowering / fixing (in replacement or for extention) MS coloumn pipe 150mm bore flange type and 7.1 mm thickness ERW steel pipe including jolinting material i.e. rubber packing nuts, / bolts washers etc.

S & F for demolition of old unserviceable valve chamber and construction of new valve chamber of size 0.9m x 0.9m x 0.9 mtr with brick work comprising the following items complete all as specified and directed. (a) 150 MM thick PCC foundation (1:2:4) type B2 40 MM graded aggregrate. (b) Brick construction with (1:6) cement mortar and rendering 15 mm thick externally and internally complete fair face of brick works surface in cm (1:4). (c) MS cover of thickness 4 mm double door type welded to angle of size 40 x 40 x 5 mm embedded in cement coping in PCC (1:2:4) tye B-0 wirh anchor fastner including locking arrangment complete with two coat of heighly corresive resistant apoxy point over one coat of red oxide primer.

Supplying,installation,testing,commissioning of LT panel board 3 phase 4 wire system indoor type factory made wall mounting with suitable clamp dust and vermin proof cubical type interlocking arangement ( IP- 55 protection) fabricated with 2 mm thick CRCA sheet with Anti corrosion coating & finally polyester powder coated of finite green fuly compartment with providing with suitable size of aluminum strip all as specified for the following. (a) Incomming :- (i) On load Change Over Switch 200 Amps , 4 pole 01 No. (ii) MCCB 200 AMPS 4 pole 415 Vollts 35 KA -01 No. (iii) Digital type Amp Meter 0-200 Amp with CT's 03 Nos. (iv) Digital type voltmeter 0-500 Volts -01 No. (v) Indicating lamps (RYB) 01 set of 3. (vi) Aluminium bus bar rating 300 Amps 3 phase neutral-01 set (vii) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 125 AMPS 4 pole 415 Vollts 35 KA -02 No. (ii ) MCB TPN 32 AMPS 10 KA -01 No. (iii) In built automatic star- Delta starter suitable for submersible Pump upto capacity 50 HP complete with all accessories and wiring complete. Make Havells/ L & T.

M/S DEEKSHA CONSTRUCTION

PANDEY TRADERS

M/S Akhilesh Enterprises

PITAMBARI TRADERS