REPAIR, REPLACEMENT OF INTERNAL WIRING, DBS, MCCBS/MCBS AND OTHER CONNECTED ITEMS ETC AT RAKSHA VIHAR COLONY DGQA/DRDO POOL UNDER GE (I) R and D KANPUR

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring (Concealed type) complete with FR PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth (excluding ceiling surface for existing or new pipe reqmt direction by engr- in- charge ) and supply and fixing PVC conduit pipe medium grade of nominal size 20 mm dia along with connected fittings/junction boxes using existing/New sunk terminal boxes, new 3 mm thick laminated sheet cover with screws and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and treated surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed and suitable for the following: -

i) One light point or one fan point controlled by one way, single pole switch

(ii) One 3 pin socket outlet, 6 amps on the "same board" with other switches.

(iii) One 3 pin socket outlet, 6 Amp on “independent board”with other switches.

(iv) One bell / buzzer point controlled by one push button on “independent board”.

All as per item No. 2.00 here in above but point wiring using 2.5 Sqmm (Nominal area) FR PVC insulated unsheathed copper conductor 1100 volts for one 3/6 pin socket outlet ,suitable for 16 amps on “independent board”.

M&L for drawing the wire in existing conduit steel/PVC complete with point wiring complete with FR PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth if required (excluding ceiling surface for existing pipe) along with connected fittings/junction boxes and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmica laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed and suitable for the following: -

(i) One light point or one fan point controlled by one way, single pole switch

(ii) One 3 pin socket outlet, 6 amps on the "same board" with other switches.

(iii) One 3 pin socket outlet, 6 Amp on “independent board”with other switches.

(iv) One bell / buzzer point controlled by one push button on “independent board”.

All as per item No. 4.00 here in above but point wiring using 2.5 Sqmm (Nominal area) FR PVC insulated unsheathed copper conductor 1100 volts for one 3/6 pin socket outlet ,suitable for 6/16 amps on “independent board”.with 1.5 sqmm with one single run copper wire as continuous earth wire to common earth dolly complete.

Supply & Fixing switch piano flush button type, 6 Amp one way, 240 Volt, single pole , ISI marked conforming to IS 3854 complete all as specified and directed. Make: Anchor/SSK/Crabtree/Indo Asian

Supply & Fixing Ding Dong sound door bell AC, 230 volts complete all as specified and directed. Make: Anchor/SSK/Crabtree/Indo Asian

Supply & Fixing bell push switch piano flush button type, 6 Amp one way, 240 Volt, single pole , ISI marked conforming to IS 3854 complete all as specified and directed. Make: Anchor/SSK/Crabtree/Indo Asian

Supply & Fixing socket out let, 2 in 1, 5 pin, 6 Amp, 240 Volt AC, flush type, style double colour series with cover plate complete all as specified and directed. Make: Anchor/SSK/Crabtree/Indo Asian

Supply & Fixing switch socket combination multipurpose 5 in 1, 6 pin, 6 and 16 Amp, 240 Volt AC, style duoble colour series" with cover plate complete all as specified and directed. Make: Anchor/SSK/Crabtree/Indo Asian

Supply & Fixing FASHION batten/angle holder with colour ring. Make: Anchor/SSK/Crabtree/Indo Asian

Supply & Fixing FASHION ceiling rose with colour ring. Make: Anchor/SSK/Crabtree/Indo Asian

Supply & Fixing medium step type fan regulator 80 Watt, 240 Volt AC, style double colour series "style medium step" ISI marked complete all as specified and directed. Make: Anchor/SSK/Crabtree/Indo Asian

Supply, fixing and testing in replacement of Old unserviceable /worn out light fitting by surface/wall mounted LED MS batten , with decorative end cap complete with retrofit T-8 polycarbonate/Glass tube and integrated electronic driver suitable for 20 watt LED tube inluding high efficeincy LED linear lamp with accessories including connection with 3 core sheathed PVC insulated cable white colour not less than 0.5 sqmm not more than 0.50 m long complete all as specified and directed. Make:- C & S( cat part No LTDC0161820WLED + LT4F20WLEDT8/WDI) or equivalent make of Bajaj/Philips/Havells as approved by GE (I).

S & F in replacement of Bulk Head fitting in Engineering plastic housing with clear prismatic difusser (e-TARA series) of 1x 10 Watt LED light luminaires complete , including 1X10 Watt IP 65 LED including fixing on wall and making electrical connection with PVC insulated flexible copper wire, twin twisted of size 0.5 Sq mm not more than 0.50 m long complete all as specified and directed. Make:- C & S cat part No CG80IB10WLED OR equivalent make of Bajaj/Philips/Havells as approved by GE (I).

Supply & Fixing LED Mirror light fitting, 1x9 watt (TC-S) bulk head luminaries with lamp holders , ballast including LED , 50 Hz complete with all accessories including making electrical connection with PVC insulated flexible copper wire, three core of size 0.5 Sq mm not more than 0.50 m long including taking down old bulk head/ sketch light fitting complete all as specified and directed. Make:-Bajaj/Philips/Havells as approved by GE (I).

S&F LED bulb of 14 watt cool day light complete in all respect complete as specified and directed. Make:- Havell/ Phillips/Bajaj as approved by GE (I).

Supply and fixing in replacement of Old unserviceable /worn out switch board screw with cup washer complete (As per sample) all as specified and directed by GE (I).

Supply and fixing in replacement of Old unserviceable /worn out PVC Gutties complete(As per sample) all as specified and directed by GE (I).

Himanshu Construction and Suppliers

SUSHMANAND ENGINEERING WORKS

SAKSHAM SUPPLIERS BUILDERS

Lalta Prasad vijay kumar Forwarding Agency