CLEANING OF OH TANK, UG SUMP, SWIMMING POOL, STPS AND CONNECTED ITEMS AF UNDER GE AVADI

Amount

Material and Labour to drain out water from overhead tank of 50000 gallons capacity(14m staging) cleaning of internal of walls of RCC sump, removing all dirt, dust and vegitation with the help of wire brush and applying two coat of lime wash in internal surfaces of overhead tank including painting of all inlets/outlets CI/GI pipe line with synthetic enamel black paint and marking arrow to indicate directions of flow of water with synthetic enamel white paint and writing in words/ figure of size 10mm thick for following details complete all as specified and as directed. (a) Date of cleaning (b) Due date of cleaning (c) Capacity of tank. Note:- (a) The rates for all T&P using for cleaning for sump shall be inclussive of these item no any extra cost shall be paid to the contractor) (b) The contractor shall provide all mandatory safety and precautionary measures for the labour to work in heights, enclosed spaces and prevent asphyxiation. (c) All dirt, muck and growth removed during cleaning shall be disposed off away from MD land. (d) The contractor may use mechanical machinery in the cleaning process. However nothing extra shall be paid for the same.

All as item No 1.00 above but for 50000 gallons capacity (21m staging)

All as item No 1.00 above but for 100000 gallons capacity (14m staging)

All as item No 1.00 above but for 100000 gallons capacity (21m staging)

Pumpout out all water from Under ground sump / storage tank / flood water storage sump of 60000 gallons capacity cleaning the internal surfaces of by scrapping down / brushing and removing all silt, dirt, algae etc from walls, floors, washing / cleaning with water and bleaching powder and applying one coat of white wash to all internal surfaces of floor, walls and ceilings and one coat of cement base paint to all external surfaces including top surfaces of OH tanks and including preparing old steel surfaces and applying one coat of anti corrosive bituminous paint on all old steel surfaces such as vent pipes, inlet, outlet pipes, ladder of the following capacities complete all as specified and directed . Note:- (a) Rate quoted is deemed to include painting to obliterate labels using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing and painting of hash markings of water level indicator. (b) The contractor shall provide all mandatory safety and precautionary measures for the labour to work in enclosed spaces and prevent asphyxiation. (c) All dirt, muck and growth removed during cleaning shall be disposed off away from MD land. (d) The contractor may use mechanical machinery in the cleaning process. However nothing extra shall be paid for the same.

All as per item No 5.00 above but for 100000 gallons capacity

Dismantling and taking up unserviceable ball type foot valve of 80mm dia and removal from site under Sch of credit and provision of cast iron foot valve of same dia , single disc with flanged ends drilled with holes, ISI marked (conforming to IS 4038) with rubber gasket 3mm thick, mild steel nut, bolts and washers, necessary machining works of the following bore of pipe complete all as specified and as directed. Note:- The footvalves are fitted to existing suction lines of monoblock / centrifugal pumps in the UG Sump

All as per item No 7.00 above but for 100mm dia

Supply and laying UPVC pipes 50 mm dia ,Sch 80 laid in trench complete including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including taking down the old rusted pipe and testing complete all as specified and as directed.

All as per Srl Item No 9.00 above but for dia 40mm

All as per Srl Item No 9.00 above but for dia 25mm

All as per Srl Item No 9.00 above but for dia 20mm

Taking up cast iron mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead, trenches / walls / roof / floor etc., and removal from site under Sch of credit and provision of Cast iron pipes spigot and socket joints for 80mm bore of pipe. of class "B" in any lengths laid in trenches of the following bore of pipe complete all as specified and as directed. Note:- (a) Earthwork as required shall be measured and paid separately. (b) CI specials and lead / tyton joints as required shall be measured and paid separately.

All as per item 13.00 above but for 100 mm dia

All as per item 13.00 above but for 150 mm dia

All as per item 13.00 above but for 200 mm dia

All as per item 13.00 above but for 250 mm dia

All as per item 13.00 above but for 300 mm dia

Cast iron fittings such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs as required, weighed as per IS-1538 suitable for cast iron / ductile iron pipes upto 150mm bore of pipe, (flanged / socket) complete all as specified and as directed

Cast iron fittings such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs as required, suitable for cast iron / ductile iron pipes 200mm to 300mm bore of pipe, (flanged / socket) complete all as specified and as directed

Tyton joints with rubber gasket suitable for ductile iron pipes of 80mm bore of pipe complete all as specified and as directed.

All as per item 21.00 above but for 100 mm dia

All as per item 21.00 above but for 150 mm dia

All as per item 21.00 above but for 200 mm dia

All as per item 21.00 above but for 250 mm dia

All as per item 21.00 above but for 300 mm dia

Run lead joints as in repairs by melting down old lead including spun yarn or tarred gasket for the cast iron pipes 80.mm dia , spigot and socket joints complete all as specified and as directed.

All as per item 27.00 above but for 100 mm dia

All as per item 27.00 above but for 150 mm dia

All as per item 27.00 above but for 200 mm dia

All as per item 27.00 above but for 250 mm dia

All as per item 27.00 above but for 300 mm dia

M&L (in replacement) sluice valve flanged & drilled holes type of size 300mm bore with high tensile S/S spindle duly ISI marked class PN 1.6 with jointing material and nut, bolt, washer complete incl dismandling of old u/s sluice valve all as specified and directed .

All as per item No 33.00 here in before but sluice valve size 275mm dia

All as per item No 33.00 here in before but sluice valve size 250mm dia

All as per item No 33.00 here in before but sluice valve size 200mm dia

All as per item No 33.00 here in before but sluice valve size 150mm dia

All as per item No 33.00 here in before but sluice valve size 100mm dia

All as per item No 33.00 here in before but sluice valve size 80mm dia

Dismantling and taking up unserviceable gun metal gate valve and removal from site under Sch of credit and provision of gun metal gate valve, ISI marked of the 50mm bore of pipe complete all as specified and as directed.

All as per item No 40.00 here in before but gate valve size 40mm dia

All as per item No 40.00 here in before but gate valve size 25mm dia

All as per item No 40.00 here in before but gate valve size 20mm dia

M & L for Detecting leakage in Cast Iron Pressure Pipes of 200/250/300 mm bore in any location, any depth including necessary earthwork excavation and repairing and arresting leakage by providing S/S leak arrester andJointing Material, Flanged Clamps, Nuts, Washers & Bolts etc. complete all as specified and as directed.

All as per Serial Item No. 44.00 above but of 150 mm bore.

All as per Serial Item No. 44.00 above but of 100 mm bore.

All as per Serial Item No. 44.00 above but of 80 mm bore.

All as per Serial Item No. 44.00 above but of 50/40 mm bore. Note :- Repair material such as bend , tee, nipple, union of suitable size etc shall be included in the quoted rate. No extra amount paid to the contractor for the same.

To attend elect complaint of water supply installations replacing burnt lugs of cable, to check auto star delta starter, voltmeter, ampere meter or any other items in pump panel changeover switch and make functional if minor repair involves to above equipments complete all as specified and directed.

Material and labour in replacement for high voltage fire resistant, flame retardant self adhesive electrical insulaion tape suitble for Low voltage (RYB) for insulation of all Pump motor connection at varuous pump house complete all as specified and as directed.

Material and labour in replacement for framing of soft wood notice sign board of size 600 mm X 1200 mm duly framed with aluminium binding fixed with hassan cloth dark green/navy blue in colour fixed and stiched on the board properly in corporated with hanging arrangement with 02 nos hooks complete in all respected as specified and directed

Dismantling the old rusted sign board and supply and fixing in replacement of new weather proof sign board for water supply installation/ sewage treatment plants at Avadi incl fabrication of rectangular MS pipe of size 50 mm X 25 MM framed 8 Ft X 4 Inches long and and 2 Ft X 4 inch width having provision with strips for fixing the sign board sheet duly painted with two coat of synthetic enamel white paint over a coat of red oxide primer and fixed with aluminium composit panel not less than 3 mm thick duly company painted with the MES blue colour one side and gray colour other side of size 8 ft X 2 ft printed with computerised printing white strikers as on blue side for marking the name of installations 9.0 inches in height and 6 inches in width, MILITARY ENGINEER SERVICES duly border with red colour tape as per site requirement in respect of different locations and installations under GE Avadi . Fixing the same on wall of installations with proper alignment using not less than 08 Nos fasterner with nuts, bolts and washers all as specified and directed

Dismantling the old and fainted equipment history sign board at installations in replacement and fabricated the new sign board not less than 2.25 feet in length and 4 feet in height printed with white stickers with complete detail of machinery ( ie name of Installstion, date of Installstion, SM No, MES No, capacity of the mechanary , date of manufacturer, initial Amount , Machinery supplied by the firm, Job No, CA No, other requirements as directed) made of aluminium composit panel not less than 3.0 mm thick duly company painted with the MES blue colour one side and grey colour other side computerised printing white strikers as on blue side for marking the name of installations, duly border with red colour tape as per site requirement and framed with aluminium binder in respect of different locations and installations under GE Avadi . Fixing the same on wall of installations with proper alignment using necessary fasterner with nuts, bolts and washers all as specified and directed

M&L for heavy duty metal Tripod stand for board 2x3 feet complete all as specified and as directed.

S&F in replacement of old unsv Pressure guages of range 20 Kg / cm2 for pump set complete with ball valves for isolation, siphon, fittings all as specified and directed .

Collection of sewage treated water samples from STP sump at AF stn all as per standard instructions and guidelines of the IS , transporting the samples safely and getting the tested for chemical and bactyeriological (COD,BOD,TDS,PH and etc) tests from the same institute and submit the result all as specified and directed.

M&L for butterfly valve thread/ flanged type 150mm dia including providing new leather sheet after dismantling and taking up existing unserviceable old butterfly valve as specified and directed

All as per Item No 57.00 above but size of valve 125 mm

All as per Item No 57.00 above but size of valve 100 mm

All as per Item No 57.00 above but size of valve 80 mm

All as per Item No 57.00 above but size of valve 50 mm

M&L in replacement of earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI strip of size 32 X 6 mm and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. Note :- All joints either strip to strip of strip to earth plate are fixed with welded joints.

S&F in replacement for GI strip of size 32x6 mm from test point to transformer or other places complete all as specified and directed.

Supply laying in replacement & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) LT 1100 volt grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

Excavation in trenches in soft/ loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation of poles, stay, cable, pipes etc and getting out complete all as specified and directed .

Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified and directed .

Removal of surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed .

Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed of size 50 mm outer dia and 38 mm inner dia

M&L for repair and servicing the 500 LPD STP electrical control panel, including replacing the burnt out & unsv power contactor, over load relay, time delay relay upto 20 HP motor,push buttons, push button NC / NO contactors, connectors upto 63A range, star delta starters upto 20 HP motor,DOL starter upto 7.5 HP motor, burnt out control wires & power wires after servicing the control panel tested by well trained expert in STP work all as specified and directed .

M&L for cleaning and preparation of areation point ( Fountain type ) at a height not more than 3 mtr of STP at different location by scrapping sludge, cleaning, removing, stains algae etc. from fountain, side walls, top cover etc, using wire brush coir brush etc, cleaning with acid till such a time the complete surfaces are cleaned properly, all as specified and as directed. Note:- The rate quoted shall be deemed to include for provision of brushes, acid etc., as required.

M&L for checking and detecting leakage in delivery line (UPVC/PPR/CPVC pipe any type any size ) of STP and rectifying the leakage complete including earth work and jointing material complete all as specified and directed . Note:- Rate for jointing material shall be included in the quoted rate. No extra amout will be paid to contractor for jointing material.

S&F in replacement of star delta starter suitable for motor rating upto 15 HP, 415V, 50Hz inbuild in panel board complete all as specified and directed .

S&F in replacement of star delta starter suitable for motor rating upto 5 HP, 415V, 50Hz inbuild in panel board complete all as specified and directed .

S&F in replacement of Direct-On-Line starter suitable for motor rating upto 2 HP, 415V, 50Hz inbuild in panel board complete all as specified and directed .

S&F in replacement of Direct-On-Line starter suitable for motor rating upto 7.5 HP, 415V, 50Hz inbuild in panel board complete all as specified and directed .

Supply and fixing in replacement 3 Pole,415V,16KA MCCB 100A Cap including taking down existing MCCB all as specified and directed

M&L for lifting and lowring and disconnecting electrical connections of sewage Submersible motor pumpset and decoupling the pump and motor, suction and delivery pipe, transporting motor pump set to work shop. Deassemble the motor, removing, replacing the worn out bushes / bearing service the motor complete, and deassemble the pump set removing pump shaft repair by lathe work for proper alignment, replace thurst bearing, Impellar, brass bush, CI bowl assembley, rubber coupling,washers, nuts and bolts including replacement of OIL / mechanical seal complete and with one coat of primer & two coat of synthetic enamel paint after scraping the body surface of pump with emery paper,writing letters,assemble the motor pumpset Transporting to site coupling, connecting electrical & pipe connections testing complete for 7.5 HP capacity all as specified and directed. Note :- Rate for mechanical seal/ Spare part such as bearing, bush , oil, grease lathe work if required , will be included in the quoted rate. No Extra amount will be paid to the contractor.

M&L for replacement of rubber packing /gasket suitable for 80mm/100 mm dia MS/ UPVC flanged pipe complete all as specified and directed

M&L for replacement of rubber packing /gasket suitable for 150 mm dia MS/ UPVC flanged pipe complete all as specified and directed

M&L for replacement of PVC chlorine tank capacity 1000 ltr, white/ black colour complete all as specified and as directed

Material and labour for PCC 1:3:6 type C-2 using 20mm graded broken stone aggregate as in mass concrete in foundation of chloring PVC tanks etc complete all as specified and directed.

M&L for replacement of MNX 12 power contactor 3 pole all as specified and directed .

S&F time delay relay suitable for 2140 V AC all as specified and directed .

M&L for non clog sewage submersible pump set of cap 7.5 HP, 3 phase,fully copper winding , having outlet dia 100mm, complete including lowering and electrical and water connection complete all as specified and as directed.

S & F in replacement of MCB 63 amps Three pole with neutral, 'D' curve , AC 230 volts complete all as specified and directed.

S & F in replacement of MCB 40-63 amps single pole with neutral, 'D' curve , AC 230 volts complete all as specified and directed.

Taking out carefully manually by excavation of existing LT cable of size 10 Sqmm to 95 Sqmm with loops and relaying with existing bricks repair/ cutting the damages / burnt parts of cable and reconnecting into original positions complete with cable joints all as specified and directed .Note:-(i) LT Cable Joint material shall be included in the quoted rate.

Supply and spraying anti vegetation chemical liquid of 1ltrs bottle mixed with water all as specified and directed . Note:- Pump for spray chemical will be provided by the contractor and cost of pump will be included in the quoted rate

M&L for painting of MS/ERW STP/S Pool pipe line upto 100mm dia with scrapping out old faded paint and apply two coat of non corrosive paint over a coat of red oxide paint complete all as specified and as directed.

M&L for painting of MS/ERW STP /S Pool pipe line upto 150mm dia with scrapping out old faded paint and apply two coat of non corrosive paint over a coat of red oxide paint complete all as specified and as directed.

M&L for Powdered bioproduct with microbes, enzymes, and herbs to build well-settling MLSS. used for Commissioning, Recovery, and Maintenance of Aeration tank-activated sludge of STP Plant complete all as specified and as directed..

M&L for Oxy Super powder for degradation of oil and grease, eliminate odour , reduce COD, BOD, TSS etc having PH 11.5, white in colour complete all as specified and as directed.

Supply and filling Sodium hypo chlorite solution ( chlorine solution) 8 to 10 % concentrate w/v Grade conforming to IS 11673 : 1992 specification in 35 to 50 ltr litre PVC container including container all as specified and directed . Note:- (a) Chlorine solution shall be supplied in PVC container of 35-50 liters capacity. The PVC container shall be marked with Name of manufactures, batch Number, Date of manufacturing, Self life, (Expiry date) of solution , ISI marking etc. Necessary purchase voucher with test certificate from manufacture for each supply. (b) The cap of the container shall be properly sealed by the manufacture and shall be delivered in sealed container. (c) Cost of container will be included in the quoted rate. No extra cost will be paid to the contractor for the same. (d) Only 9000 ltr qty shall be brought by the contractor in one quarter. Total qty will be brought in 3 times. To avoid degradation of concentration of chemical fresh lot of chemical required every times . Rates for transportation will be considered by the contractor accordingly. No extra amount will be paid to the contractor for the same.

M&L in replacement for ball foot valve thread/ flanged type 100 mm dia including providing new leather sheet after dismantling and taking up existing unserviceable old foot valve as per site requirement all as specified and directed

M&L for cleaning of bar screen weekly by removing sludge,cleaning, removing, stains algae etc. floating over and from bar screen by using necessary T&P etc, for STP of capacity 500 KLD at DC-I and DC-III area complete all as specified and as directed.

M&L for cleaning of tube settler tank quarterly for STP of capacity 500 KLD at DC-I and DC-III area complete all as specified and as directed.

M&L for cleaning of MBBR 1 & 2 half yearly by scrapping sludge, cleaning, removing, stains algae etc. from side walls etc, using wire brush coir brush etc for STP of capacity 500 KLD at DC-I and DC-III area complete all as specified and as directed.

M&L for cleaning of Sludge Drying Bed quarterly by scrapping sludge, cleaning, removing, stains algae etc. from side walls for STP of capacity 500 KLD at DC-I and DC-III area complete all as specified and as directed.

M&L for cleaning of Chlorine Contact Tank monthly by scrapping sludge, cleaning, removing, stains algae etc. from side walls for STP of capacity 500 KLD at DC-I and DC-III area complete all as specified and as directed.

M&L for cleaning of Filter Feed Tank monthly by scrapping sludge, cleaning, removing, stains algae etc. from side walls for STP of capacity 500 KLD at DC-I and DC-III area complete all as specified and as directed.

Material and Labour to repair / maint of unsv booster/ centrifugal pumps of 20 HP capacity and dismantling and strip opening to complete booster/centrifugal pump under mention cap and segrigated all serviceable parts and kept at site for reuse incl replacement of bronze impellar of suitable size and bushes bearing and other required parts and making serviceable to the pump complete and servicing, cleaning,greasing, overhauling, re-alignment with lock,key,nut, bolts,washers and reassembling the same after testing complete and all as directed

All as per description serial item No 103.00 above but 10 HP capacity

All as per description serial item No 103.00 above but 7.5 HP capacity

All as per description serial item No 103.00 above but 5 HP capacity

All as per description serial item No 103.00 above but 3 HP capacity

All as per description serial item No 103.00 above but 2 HP capacity

Material and Labour to repair / maint of unsv booster/ centrifugal pumps motor electric driven for 20HP capacity and dismantling and opening complete motor under mention cap and segrigated all serviceable parts and kept at site for reuse incl rewinding motor with supper enamled wire of suitable gauge complete , and replaceing bushes, bearing check nut, and other required parts and varnishing the same incl painting of motor , making serviceable to the motor complete and servicing, cleaning,greasing, overhauling, re-alignment with lock,key,nut, bolts,washers and reassembling the same after testing complete and all as specified and directed .

All as per description serial item No 109.00 above but 10 HP capacity

All as per description serial item No 109.00 above but 7.5 HP capacity

All as per description serial item No 109.00 above but 5 HP capacity

All as per description serial item No 109.00 above but 3 HP capacity

All as per description serial item No 109.00 above but 2 HP capacity

M&L for inspection of Induction motor and pump set at STP of DC-I and DC-III area under GE Avadi for checking the alignment of pump and motor / Air blower Pump motor and make them in good alignment, greesing and oiling mechanical parts upto 60 HP Pump motor set complete all as specified and as directed.

M&L for demolition of old rusted/ broken foundation of induction motor and construction of new foundation by using PCC 1:2:4 type B1 using 20 mm graded aggregate as in foundation / mass concrete and angle iron duly welded and grouted in ground by using 12mm thick and 12 inch long bolt for each foundation complete all as specified and as directed.

M & L in replacement old rusted angle iron , of foundation of Pump and motor , supporting for cable tray etc at various location of STPs including valve pit cover including locking arrangement, and construction of new pump & motor foundation , valve pit chamber , valve pit cover , locking arrange for valve pit etc by using angle iron and back plates fabricated from structural steel sections including nut bolts washers welding bending cold and hot drilling holes for bolts in any shape or size as indicate or directed and inclusive of one primer coat one under coat and one finishing coat of paint all as specified and directed .

M&L for sewage water testing kit suitable for testing and MLSS counting test kit with sheet metal enclosure box suitable for testing of Sewage water parameter as complete all as specified and as directed.

M&L for cleaning of Equilisation tank half yearly by scrapping sludge, cleaning, removing, stains algae etc. from side walls etc, using wire brush coir brush etc for STP of capacity 500 KLD at DC-I and DC-III area complete all as specified and as directed.

M&L for arrangement of vehicle, tanks and submersible pumps and other T&P for lifting of sewage water / sludge into tanks and transport of silt / sewage water collected from different tanks and UG Sumps of STP and shifting to a place far away from the AF/ Army area in cosultation with corporation authorities for further disposal all as specified and directed .

Supply and replacement of tube shuttler media MOC PVC, Hexagonal shape of tube, plan settling area 11 m2/m3 (at 60 degree slope) height of media 750mm /1000mm tube fitting tongue and groove colour blacke max contineues working temp 55 degree ,thcikenss 1mm complete suitable for tube shuttler tank of 500 KLD or 15 cum all as site requirement all as specified and as directed .. Note :- Tube settler media will be fixed only expert person or auth rep of company

Material & Labour for dewatering the swimming pool (main pool and kids pool) , cleaning, removing, stains algae etc. from floors, side walls, ducts etc, using wire brush coir brush etc, cleaning with acid till such a time the complete surfaces are cleaned properly, all as specified and as directed. Note:- The rate quoted shall be deemed to include for provision of brushes, acid etc., as required.

Material and labour for dewatering the balancing chamber of size 3 mtr dia 6 mtr depth, removing sand, silts etc,using wire brush with acid from the bottom of the chamber manually including bailing out of water below foot valve by using mobile pump set, all as specified and directed.

Carrying out swimming pool cleaning, stains algac etc, from floors,side walls,ducts, with suction sweeper once in a week during maintenance day with two labour all as specified and directed .

M&L for providing Pool algaecide specifically effective against green, black spot & mustard algae,Packing: 5 Kg. sealed plastic container of make declibac or equivalent complete all as specified and as directed.

Supply only compressor oil including oil filter for Air compressor

Supply only V belt for Air compressor of suitable size.

Supply & Fix Brush for suction sweeper including dismantling of existing brush.

Supply & Fix PVC flexible pipe 32 mm bore for suction sweeper including dismantling of existing pipe all as specified and directed .

Supply & Fix suction Sweeper wheel suitable for suction sweeper including taking down the existing wheels all as specified and directed .

Supply & Fix PVC cable 3 core 6 sqmm for suction sweeper including taking down existing cable all as specified and directed .

Supply & Fix new pressure gauge 100 mm dia, dial type, 0-14 kg/sq.cm including dismantling existing pressure gauge all as specified and directed .

M&L in replacement for foot valve flanged type 100 mm dia including providing new leather sheet after dismantling and taking up existing unserviceable old foot valve as per site requirement all as specified and directed.

Dismantling chlorine dosing plant of cap 1 HP electrically/ mechanically from its base and transporting to the workshop dismantling the dosing pump and replacing the unserviceable parts such as 'O' ring, ceramic ball, Non return valve, foot valve, PVC pipe etc., by Supply & Fix including over hauling the plants all as specified and directed. Note : The rate quoted is deemed include for spare parts i.e. 'O' rings, ceramic ball, NRV, foot valve, PVC pipe.

All as per Item No. 134.00 above, but alum dosing plant.

Supply & Fix Stainer Basket of size 100mm including taking down unserviceable basket all as specified and directed .

M&L for providing swimming pool water testing kit having 50 strips in one plastic contnainer POOL STANDARD – T19 all as specified and directed . Pool balance module to check water parameters with following ranges: pH: 6.8 – 8.4 Total Alkalinity: 0 ppm - 240ppm Available Chlorine: 0 ppm - 5 ppm Hardness: 0 ppm - 1000 ppm Stabiliser: 0 ppm - 250 ppm Packing: 50 strips in sealed plastic container

Material and Labour to repair / maint of unsv booster/ centrifugal pumps motor electric driven for 10HP capacity and dismantling and opening complete motor under mention cap and segrigated all serviceable parts and kept at site for reuse incl rewinding motor with supper enamled wire of suitable gauge complete , and replaceing bushes, bearing check nut, and other required parts and varnishing the same incl painting of motor , making serviceable to the motor complete and servicing, cleaning,greasing, overhauling, re-alignment with lock,key,nut, bolts,washers and reassembling the same after testing complete and all as specified and directed .

Dismantling Air blower pump and motor cap 5 HP electrically/ mechanically from its base and transporting to the workshop dismantling the dosing pump and replacing the unserviceable parts such as 'O' ring, ceramic ball, Non return valve, foot valve, PVC pipe etc., by Supply & Fix including over hauling the plants all as specified and directed. Note : The rate quoted is deemed include for spare parts i.e. 'O' rings, ceramic ball, NRV, foot valve, PVC pipe.

M&L for providing Trichloroisocyanuric Acid TCCA 85%-90% Chlorine Tablet for Swimming Pool having pack of 25 Kg drum of make Declibac or equivalent and have following specifications:- Color: White Appearance: Tablet Tablet weight: 200 gm Type: Swimming Pool Treatment Other Name: TCCA Tablets pH: 2.7-3.3 Moisture: 0.5%Max

Taking out defective submersible pumpets including motor of capacity 20HP from Swimming Pool Sump for repair by lifting GI/MS tubing of size 100/80 mm from upto a depth of 5m by means of chain pully block or other T&P, disconnecting electrical and pipe line connection, transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts includng repair / renewal of worn out parts and spray painting with one coat of synthetic enamel paint after cleaning and scrubing, shifting back to openwell / sump , lowering and reinstallation, commissioning and testing on full load complete all as specified and directed. Note:- (a) Major defective spares replaced shall be measured and paid separately as supply only as given in list of spares here-in-after. (b) Cost of consumables like grease, cotton waste etc., other minor items /spares such as nut, bolts washers, gaskets, paints etc which are not covered under List of spares but required for effective functioning of the plant shall be deemed to be included in the rate quoted.

Supply only Impeller for submersible pumpset of capacity 20 HP of submersible pumpsets for openwell / sump complete all as specified and as directed.

Supply only Thrust bearing complete for submersible pumpset of capacity 20 HP of submersible pumpsets for openwell / sump complete all as specified and as directed.

Supply only Brass bush and distance piece for submersible pumpset of capacity 20 HP of submersible pumpsets for openwell / sump complete all as specified and as directed.

Supply only CI Bowl assembly for submersible pumpset of capacity 20 HP of submersible pumpsets for openwell / sump complete all as specified and as directed.

Dismantling motor of submersible openwell / sump pumpsets of any make / model, rewinding with super enamelled copper winding of appropriate gauge and quality and insulated with varnish after removal of burnt out winding from slots with emery paper, including replacement of minor parts like worn out bush, bearing, "O" rings and filling of cooling oil with oil seal and terminal lead for AC three phase, 415 volts grade, reassembling the motor commissioning and testing for full functionality, pumpsets of 20 HP capacity complete all as specified and directed.

Taking out defective submersible pumpets including motor of capacity 7.5HP from Swimming Pool Sump for repair by lifting GI/MS tubing of size 100/80 mm from upto a depth of 5m by means of chain pully block or other T&P, disconnecting electrical and pipe line connection, transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts includng repair / renewal of worn out parts and spray painting with one coat of synthetic enamel paint after cleaning and scrubing, shifting back to openwell / sump , lowering and reinstallation, commissioning and testing on full load complete all as specified and directed . Note:- (a) Major defective spares replaced shall be measured and paid separately as supply only as given in list of spares here-in-after. (b) Cost of consumables like grease, cotton waste etc., other minor items /spares such as nut, bolts washers, gaskets, paints etc which are not covered under List of spares but required for effective functioning of the plant shall be deemed to be included in the rate quoted.

Supply only Impeller for submersible pumpset of capacity 7.5 HP of submersible pumpsets for openwell / sump complete all as specified and as directed.

Supply only Thrust bearing complete for submersible pumpset of capacity 7.5 HP of submersible pumpsets for openwell / sump complete all as specified and as directed.

Supply only Brass bush and distance piece for submersible pumpset of capacity 7.5 HP of submersible pumpsets for openwell / sump complete all as specified and as directed.

Supply only CI Bowl assembly for submersible pumpset of capacity 7.5 HP of submersible pumpsets for openwell / sump complete all as specified and as directed.

Dismantling motor of submersible openwell / sump pumpsets of any make / model, rewinding with super enamelled copper winding of appropriate gauge and quality and insulated with varnish after removal of burnt out winding from slots with emery paper, including replacement of minor parts like worn out bush, bearing, "O" rings and filling of cooling oil with oil seal and terminal lead for AC three phase, 415 volts grade, reassembling the motor commissioning and testing for full functionality, pumpsets of 7.5 HP capacity complete all as specified and directed.

Dismantling the Suction sweeper Pump of cap 2 HP completely, carry out servicing by removing and replacing the worn out bearings, impellers, bushes, sleeves etc including necessary machining work all as specified and directed . Note : The rate quoted is deemed include new bearings, impellers, bushes and sleeves.

Supply only following maintenance kit for swimming pool (Pool cleaning equipment):-

Leaf rakes

Leaf skimmer

18" curved wall brush

8" metal algae brush

Removing and replacing the unserviceable Vaccum Hose of size 40 mm all as specified and directed .

Removing and replacing the unserviceable Vaccum Head Rope all as specified and directed .

M&L for fountains and pool underwater LED 24 Volt, 12 Watt RGB light including driver , Full SS Spot light, IP-68 complete all as specified and as directed.

Material & Labour for painting of complete Pumps and motors inside plant room connected to swimming pool as shown in the list of plants and including, valves and electrical control panel boards, with one coat of synthetic enamel paints after cleaning of all dust, oil etc. with wire brushes all as specified and directed.

Supply & Fix step down transformer for under water light fittings complete after taking out existing unserviceable transformer all as specified and as directed.

Supply & Fix LED under water light fittings with accessories including bulb 70 watts complete after taking out unserviceable light fittings etc., all as specified and as directed.

S&F in replacement new generation energy saving , decorative LED Spike light using COB LED as light source, 9 Watt, 230V, IP-66 complete all as specified and as directed.

M&L for replacement of new generation , IP65 post top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distributiion, spun aluminum lanscape luminaire with high power LED 15 Watt as light source, Opal cover offers soothing unifgorm illumination complete all as specified and as directed.

Supply & Fix in replacement floodlight water-proof LED cool white/ warm light 40W light with fittings, accessories complete including taking out unserviceable light fittings etc. all as specified and as directed.

Material & Labour for opening up the man hole cover, removing the pressure filter media comprising graded sand, Gravel, Graded pebbles from the filter plant, cleaning and drying up the inside surfaces and pipe line distributors of the filter plant, preparation and applying one coat of anti corrosive black paint inside the plant,and anti corrosive green paint outside the plant refilling the filter media in layers as per the plan displayed in the plant room, refixing the manhole cover, properly, testing and commissioning the filter plant for proper function all as specified and as directed. Note :- Refilling filter media paid separately as supply only.

Supply only the following filter media items in the pressure filter plant :-

Fine Sand 16 x 32

Coarse Silex 8 x 16

Coarse Chips 4 x 8

Crushed Gravels 1 /2-1 / 4

Pebbles 3 / 4 - 1 / 2

Pebbles 1 - 3 / 4

Pebbles 1 1/2 - 1

Material & labour for cleaning away all surrounding area inside swimming pool as and when asked to do but minimum once in a month including cutting of grass vegetation with grass cutter machine to make the area clean complete all as specified and directed. Note :- All types of tools and plant required for cleaning/ cutting will be arranged by the contractor without any extra cost.

M&L for low level high power copper winding heavy duty submersible openwell pump set 1 Hp cap, 230 Volt, suitable for fountain including all the electrical and water connections comppete all as specified and as directed.

M&L for painting of MS/ERW pipe 80mm dia to 100 mm dia with scrapping out old faded paint and apply two coat of black paint complete all as specified and as directed.

Servicing and repair/maint of Starter Panel upto 2 HP capacity , Single phase including replacement of relay, start / stop push button, Neon Indicator lamps, Intrernal copper / brass , thimbles etc complete links and applying necessary grease to link of panel all as specified and as directed. Note spare part such as relay, push button , lamps brass links etc included in the quoted rate complete all as specified and directed.

Servicing and repair/maint of Starter Panel upto 5 HP to 7.5 HP capacity , three phase including replacement of relay, start / stop push button, Neon Indicator lamps, Intrernal copper / brass , thimbles etc complete links and applying necessary grease to link of panel all as specified and as directed. Note spare part such as relay, push button , lamps brass links etc included in the quoted rate complete all as specified and directed.

pmv.enterprises (BID ID -3358565)