REPAIR RAISING OF BROKEN MANHOLES REPLACEMENT OF MANHOLE COVERS GULLY FLOOR TRAPS (CI PVC SWR RCC) DRAIN PIPE LINES ETC UNDER GE (WEST) FEROZEPUR CANTT

Amount

Demolition of brick work or stone /boulders masonry , built in cement mortar as in manholes etc complete all as specified and as directed

M&L for Brick work with sub class "B" Bricks straight or curved on plan exc 6 m mean radius with old size bricks in CM 1:6 for crackes/ broken/ damaged walls of man holes/ septic tanks/ soak well/ pits , compound walls etc complete all as specified and as directed

All as per item No-02 above but except bricks complete all as specified and as directed Note- Old retrieved servicealbe bricks shall be reused after proper cleaning.

M&L for Half brick work with sub class 'B' bricks built in CM 1:4 as in inspection chambers wall and gully trap portions etc complete all as specified and as directed

M&L for providing cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate ) as in coping to brick walls of manholes etc and other similar work including necessary form work complete all as specified and as directed

Taking down cement plaster from inside/outside of existing septic tanks/ soak pits/man holes walls etc including racking out joints, hacking for keys scrubbing down with water and removal of rubbish off the premises complete all as specified

M&L for 15 mm thick rendering in CM 1:4 inside and outside of manholes/ septic tank/soak pit walls etc / concrete surfaces with WPC @ 3 % by weight of cement contents complete all as specified and as directed

Supply on integral water proofing compound complete all as directed

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m depth for cess pits, manholes etc and getting out in soft/ loose soil even in foul position complete all as specified

Excavation in trenches n. exc 1.5 m wide and exc 1.5 m depth but n. exc 3.0 m in depth for cess pits, manholes etc and getting out in soft/ loose soil even in foul position complete all as specified

Excavation in trenches n. exc 1.5 m wide and exc 3.0 m depth but n. exc 4.50 m in depth for cess pits, manholes etc and getting out in soft/ loose soil even in foul position complete all as specified

M&L for PCC 1:4:8 type D-2 (Using 40 mm graded crushed stone aggregate) as in foundation fillin of manholes, and mass concrete complete all as specified and as directed

M&L for PCC 1:5:10 type E-2 (Using 40 mm graded crushed stone aggregate) as in foundation fillin of manholes, and mass concrete in sunken floors of toilets etc complete all as specified and as directed

M&L for providing cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate ) as in surface channel of manholes etc and other similar work including necessary form work complete all as specified and as directed

M&L for extra forming for fair finished drain or channel 30 cm inner girth in cement concrete using extra cement , including forms, mounds, mtred/ stopped end etc as in manhole pipe line portion only complete all as specified

Retruning filling in including spreading levelling , watering and well ramming in layers n. exc. 25 cm in soft/ loose soil complete all as specified

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified

Cutting into existing manholes for connecting new draing, making good to pipe and rendering cutting out existing benching for and froming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 , type B-1 , finished smooth and reforming benching as required for internal pipe of dia 200 mm and above complete all as specified

Cutting into existing manholes for connecting new draing, making good to pipe and rendering cutting out existing benching for and froming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 , type B-1 , finished smooth and reforming benching as required for internal pipe of dia 150 mm and above complete all as specified

Demolition and breaking of drain pipes (SGSW/PVC/RCC etc) set in cement mortar of internal dia 300 mm and over complete all as specified

Demolition and breaking of drain pipes (SGSW/PVC/RCC etc) set in cement mortar of internal dia 200 mm complete all as specified

Demolition and breaking of drain pipes (SGSW/PVC/RCC etc) set in cement mortar of internal dia 150 mm complete all as specified

M&L for PCC 1:4:8 type D-2 (Using 40 mm graded crushed stone aggregate) as in concrete bed to 300 mm bore and above drain pipes including packing under and haunching against the sides of pipes after pipes area laid and tested complete all as specified and as directed

M&L for PCC 1:4:8 type D-2 (Using 40 mm graded crushed stone aggregate) as in concrete bed to 200 mm bore drain pipes including packing under and haunching against the sides of pipes after pipes area laid and tested complete all as specified and as directed

M&L for PCC 1:4:8 type D-2 (Using 40 mm graded crushed stone aggregate) as in concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after pipes area laid and tested complete all as specified and as directed

M&L for 300 mm bore and above RCC pipes, class NP-2 laid and jointed complete with or without collars, laid in trenches and jointed complete all as specified

M&L for 200 mm bore RCC pipes, class NP-2 laid and jointed complete with or without collars, laid in trenches and jointed complete all as specified

M&L for 150 mm bore RCC pipes, class NP-2 laid and jointed complete with or without collars, laid in trenches and jointed complete all as specified

Demolition of RCC (reinforcement cut as required to facilitate demolition) (in manholes/ Septic tank/ Soak pit) cover slabs of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L for RCC 1:3:6 , type C-1 (using 20 mm graded stone aggregate) precast cement concrete as in cover slab for manholes and similar works , set in cement mortar 1:4 including form work complete all as specfieid and as directed

S&F deformed or twisted TMT bars 8 mm dia cut to length bent to shape required including cranking binding with MS wire (annealed ) not less than 0.9 mm dia complete all as specified and as directed

M&L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and as directed

M&L in repairs 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed

Demolition and breaking up drain pipes 75-110 dia (salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and as directed

Cutting holes in brick walls built in cement mortar for taking out/ inserting of CI/PVC/AC pipes/ branch pieces of dia n. exc 110 mm / hold fasts etc exc half brick but n. exc full brick wall complete all as specified and as directed

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and as directed

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and laid in trenches complete all as specified and as directed

S&F 110 mm dia PVC (SWR) bends with access doors any radius complete all as specified and as directed

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access doors complete all as specified and as directed

S&F 110 mm dia PVC (SWR) branch pieces single, (single Y) equal or unequal provided with access doors complete all as specified and as directed

S&F 110 mm dia PVC (SWR) reducer complete all as specified and as directed

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and as directed

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and laid in trenches complete all as specified and as directed

S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed

S&F 75 mm dia PVC (SWR) bends any radius but with access doors complete all as specified and as directed

S&F 75 mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access doors complete all as specified and as directed

S&F 75 mm dia PVC (SWR) branch pieces single, (single Y) equal or unequal provided with access doors complete all as specified and as directed

S&F in repairs 110 mm PVC (SWR) WC connector with lip ring complete all as specified

S&F in repairs 110 mm PVC (SWR) WC connector bent type complete all as specified

S&F in repairs PVC (SWR) "P" trap to IWC/EWC complete all as specified

S&F in repairs PVC (SWR) "S" trap to IWC/EWC complete all as specified

S&F in repairs stack clamps for 100 mm dia pipes, out of 50 x 5 mm flazt iron abd 16 mm dia round iron stays , including bolts and nuts and secring ends of starys to wall or roof complete all as specified

S&F in repairs stack clamps for 75 mm dia pipes, out of 50 x 5 mm flazt iron abd 16 mm dia round iron stays , including bolts and nuts and secring ends of starys to wall or roof complete all as specified

S&F in repairs vitrious china wash down water closet pan ( padestal pattern) white incl trap connection to drain and flushing pipe including seat cover for padestal pan complete all as specified

S&F in repairs vitreous china squating pan "Orissa pattern , size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified

Dismantling of floor or hearth tiling including cement mortar bedding but not backing and rusbish off the primises complete all as specified

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.11 sqm but n. exc. 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match (in patch work) complete all as specified

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.06 sqm but n. exc. 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match (in patch work) complete all as specified

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified

M&L for glazed tiles digital coloured ceramic tiles 350x250x7mm /450x350x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry and pointed in coloured cement to match (in patch work) complete all as specified

M&L for glazed tiles coloured ceramic tiles 300x200x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry and pointed in coloured cement to match (in patch work) complete all as specified

M&L for rendering 10 mm thick on fair faces of brick work in CM 1:4 to receive wall tiles in skirting and dados etc complete all as specified

Dismantling of fencing wire mesh , any type complete all as specified

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good to disturbed ground complete all as specified

Excavating in post holes ( or similar holes) each n. exc 0.5 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25 cm complete all as specified

M&L for posts and struts (75x75x6 mm ) thick in fencing including cutting tops to shape as directed , drilling holes, notching for wire, etc and fixing flat iron fillets (50x5mm) (for securing wire mesh etc) including all necessary drilling, bolting or riveting, notching etc and similar work conforming to Fe-290 Gde E-165 complete all as specified

M&L for nominal mix cement concrete 1:2:4 (type B-1) using 20 mm graded stone aggregate as in foundation filling and mass concrete in post holes complete all as specified

Supply only MS Galvanised Chain link fencing of 50x50mm size and 4 mm thick fixed to steel/concrete post and securied with MS flat iron of 50x5mm and strengthen with 10 mm dia MS round bars complete all as specified

Fixing only chain link fencing including line wires, any mesh size and type of standard rails, straining bolts, etc including provision of binding wire complete all as specified

M&L for MS round bar 10 mm dia and over , cut to length bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe-410W, gde-250E complete all as specified

S&F for Mild steel screw bolts (machine made) 11 to 15 mm dia with hexagonal or square heads at one end and escrewed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut n. exc 5 cm long complete all as specified

S&F Galvanised 2 strands steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standrad rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc ( each line of wire to be measured) complete all as specified

M&L for preparation of old painted steel surfaces of any description , not otherwise described , over 10 cm width or girth and applying one coat of synthetic enamel paint , any colour or tint complete all as specified

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as specified

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc , laid , bedded and pointed in any mortar and removal of rubish off the site complete all as specified

M&L for 75 mm thick cement concrete type C-1, 1:3:6 (using 20 mm graded aggregate) as in plinth protection/ PCC Hardstanding/sub bases etc and all other similar works complete all as specified

M&L for sand filling under interlocking paver blocks and all other similar works complete all as specified

M&L for machine pressed precast concrete interlocking paver blocks (grey colour) of any shape and size confirming to IS - 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigments , laid dry over sand cushion complete all as specified. (Note - Sand cushion shall be measured and paid seperately.)

M&L for machine pressed precast concrete interlocking paver blocks (Coloured) of any shape and size confirming to IS - 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments , laid dry over sand cushion complete all as specified. (Note - Sand cushion shall be measured and paid seperately.)

M&L for providing cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, sides of footpath and paved area etc rounded or chamfered on edges complete all as specified

Brar Enterprises

H.K.TRADERS

JAWAHAR CONSTRUCTION COMPANY

V V AND COMPANY

KAILASH CONSTRUCTION COMPANY

CHETAK CONSTRUCTION COMPANY

M/s AH Construction Co.