PROVN OF PCC DRAINAGE AND SPL REP TO BLDG

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shaft well cesspits manholes pier hot etc n.exc 10 Square metre on plan and n, exc 1.5 m in depth and getting out in soft or loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Removing excavated material exc 50m but n.exc 250m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed..

Material and labour broken stone or boulders hard core of gauge n.exc.63 mm, deposited, spread and leveled in layers n.exc. 15 Cm thick, watered and rolled/rammed to a true surface, etc complete all as specified and directed.

Taking down of chowkhats or frames not exc 1.5 Square metre each (without taking off shutters from the frame) complete all as specified and as directed.

All as per item No 5 here in before but exc 1.5 n exc 4 Square metre each.

Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water, etc complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting/ fibre sheet any gauges thickness incl nanital or similar pattern roof coverings complete all as specified and as directed.

Material and labour 100mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases, complete all as specified and as directed.

Material and labour PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection of 75mm thick finished fair and even complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 (20 mm graded aggregate) for coping to drain complete all as specified and as directed.

Material and labour for precast cement concrete 1:2:4 type B1 (20mm graded agg ) as in drain cover slabs complete all as specified and as directed.

Material and labour for cement concrete in surface channel and drain in cm 1:3:6 type C2 (40 mm graded agg) complete all as specified and as directed.

Material and labour for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified and as directed..

Material and labour for PCC.1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation complete all as specified and as directed.

Material and labour for extra for Forming fair finished drain or channel 80 cm inner girth in cement concrete using extra cement including forms, moulds, etc complete all as specified and as directed.

Supply and fix for rolled MS structural steel work of MS plates, angles, channels etc, fixed as in purlins, brackets rafters etc confirming to Fe-290 (grade E-165) complete all as specified and as directed.

Supply and fix Rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (Cut to ordinary lenghts i,e. within 20mm of the length indicated) GDE Fe 410-0W (gde E-250) quality A complete all as specified and as directed.

Supply and fix Plates plain channels Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 410-W(Gde E-250) quality B all as specified and directed.

Supply and fix mild steel flat iron 40 x 3mm as in wind tie including all necessary drilling, bolting or riveting etc., confirming to Fe 290 complete all as specified and as directed.

Supply and fix MS steel work in tubular /post/ trusses/ purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 6 mm to 8 mm dia or securing with clips, TMT bars etc complete all as spd and directed.

All as per item No. 25 here in before but 6 mm to 8 mm dia

Material and labour for 10mm thick rendering in CM 1:4 on brick or concrete surfaces finishing the surface even and smooth w/o using extra cement complete all as specified and as directed.

Material and labour for Rendering 15mm thick on external faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, eaves board etc complete all as specified and as directed.

Material and labour for Preparation of new steel/iron Surfaces of any description, over 10cm in width or girth, and applying two coat of synthetic enamel paint over one coat of red oxide primer, etc complete all as specified and as directed.

Material and labour for oil bound distempering two coats including preparation of surfaces old decorated, plastered or unplastered surfaces of wall complete all as specified and directed.

Material and labour applying two coats of acrylic emulsion paint exterior quality over a coat of primer (with antifungal properties) on external wall surfaces including preparation of old plastered surface etc , complete all as specified and as directed by Engineer - in -Charge.

Material and labour for two coats of epoxy paint over a coat of epoxy primer including Preparation new/old steel surfaces exe10 cm width or girth completed all as directed.

Material and labour for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and Non Asbestos designer ceiling board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on exposed surfaces, complete including Dismantling of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, incl cover fillets all as specified and as directed by Engineer-in-Charge.

Supply and fix Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 Square metre in each pane complete all as specified and as directed.

Supply only 4 mm thick sheet frosted glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 Square metre in each pane complete all as specified and as directed.

Supply only 5.5 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 Square metre in each pane complete all as specified and as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc all as specified and directed by Engineer-in-Charge .

Supply only aluminium anodised fly proof mesh 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium straps complete all as specified and as directed.

Supply and fix Butt hinges, Size of hinge 100mm extruded brass, with mild steel hinge pin, bright polished and fixed, type B-21 complete all as specified and as directed.

Supply and fix Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as directed.

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed.

Supply and fix 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed.

Supply and fix floor door stoper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Material and labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 Square metre but not exceeding 0.42 Square metre, in floors etc 20mm thick screed bed cement mortar 1:6 set and jointed in cement slurry and pointed with coloured or white cement to match complete all as specified and as directed.

Material and labour for Glazed ceramic tilesof size 300 x 200 x 7mm thick on vertical surfaces such as in dado/skirting and rendering in CM 1:3 10mm thk on fair faces of wall surfaces etc, all as specified and as directed by Engineer-in-Charge.

Material and labour for Chequrred cement concrete tiles with grey cement and pigment of size 300x300x25 mm, set jointed and pointed in neat cement slurry over 15 mm thick screed in CM (1:6) all as specified.

Supply and fix in repairs rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connections, bore of pipe 15mm complete all as specified and as directed.

Taking up or down steel tubing and connections, bore of pipe 20mm complete all as specified and as directed.

Taking up or down steel tubing and connections, bore of pipe 25mm complete all as specified and as directed.

Supplying and laying of CPVC pipes OF outer dia 16mm SDR 11 and plain CPVC SDR 11 with all fittings complete all as specified and as directed.

Supplying and laying of CPVC pipes OF outer dia 20 mm SDR 11 and plain CPVC SDR 11 with all fittings complete all as specified and as directed.

Supplying and laying of CPVC pipes OF outer dia 25mm SDR 11 and plain CPVC SDR 11 with all fittings complete all as specified and as directed.

Supply and fix in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern, flush pipe and waste pipe) including provision of lime concrete bedding complete all as specified and as directed.

Supply and fix in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated, pillar tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair stop valves cost copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for 15mm dia iron pipe or for union and fixed.

Supply and fix repairs PVC connection 15mm size with CP brass Nuts of legnth 450mm complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

Supply and fix 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Supply and fix 125/110 mm bore of pipe PVC (SWR) `P' trap complete all as specified and as directed.

Supply and fix in repairs stainless steel 20mm dia curtain rod complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs stainless steel curtain bracket for 20mm dia curtain rod decorative type complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 6.00 mm thick polycarbonate sheet opaque finish plain colour as in roof covering/cladding to wall, fixed with self tapping screws over 40mm x 3mm thick aluminium strips at joints complete all as specified and as directed.

Supply and fix in repairs 18/19mm thick Perforated particle board/ tiles for insulation and acoustic purposes, 60x60 cm in size matched with existing Perforated particle board/tiles ceiling, fixed with nails to timber frame work or with staples on snap grid complete all as directed by Engr In Charge.

Supply and fix in repairs particleboard 18/19mm thick for insulation/ acoustic purposes matched with existing particle board, fixed with nails to timber frame work complete all as directed at site complete all as directed by Engr In Charge.

Material and labour Granite (of any type) work of 20mm thick (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc. and keeping in safe custody for taking credit including making good disturbed surfaces of walls, ceilings etc complete all as specified and as directed.

Material and labour Point wiring complete with 1.5 Square metre single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover/Pre moulded PVC switch board for housing the switches, socket outlets, fan regulators etc. for One light/fan point controlled by one switch all as specified and as directed

All as per Item No 76 here in before but One 3 pin switch socket outlet point 5 amps on same board with other switches.

All as per Item No 76 here in before but for one 3 pin socket outlet, 15 amps independent, with cable 4sqmm size and 4 Sqmm copper conductor cable and earth continuity conductor, complete all as specified and as directed

Supply and fix Switch piano, flush button, single pole, ISI marked, one way 5 Amps 240 volts complete all as specified and as directed.

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as directed

Supply and fix switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed

Material and labour for ceiling rose surface Bakelite 65 x 50mm 3 terminal complete all as specified and directed.

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz, 100 watts, complete all as specified and as directed.

Taking down and refixing 4ft box type light fitting including accessories and provision of cable from ceiling rose complete all ad directed.

Dismantling and taking down ceiling fan 1200 mm sweep and refixing/connecting up each including provision of cable from ceiling rose or connector to fan after cleaning all dust and paitning with one coat of synthetic enamel paint by spaying etc complete all ad directed.

Supply and fix in repair sheet metal enclosure distribution board SPN, 8 way 240 volts, with 200 Amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, complete all as as specified and as directed. Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair MCB single pole and neutral, 240 volts, 6 to 32 amps C series complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Single Pole and Neutral Enclosure with Two Pin Earth Plug and Socket complete with one MCB, SP, 20 Amps, 240 Volts fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including taking down old one complete all as specified and as directed.

Material and labour in repairs for sub main wiring complete with two runs of 4Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 4 Sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories, complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of PVC Casing and caping & one run of earth continuity conductor shall be measured as one running metre.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

M/s Kanaka Agencies

B.R. ENTERPRISES

S K ENTERPRISES

M/s Pintu Furniture

M/s Shiva Engineering

Gulmarg Electrical Service