Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹67 LAccepted-AOC | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹71.4 L+₹4.4 L (6.64%)Rejected-Finance OLD AIRFIELD ROAD RAWALPORA WANBAL SRINAGAR 190005 J K | SRINAGAR | SRINAGAR | J K | 190005 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹73.0 L+₹6.0 L (8.92%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹75.2 L+₹8.2 L (12.2%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹76.4 L+₹9.4 L (14.0%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹96.2 L
EMD Value
₹1.7 L
Closing Date
11 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SRINAGAR
CWE AF SRINAGAR
PROVN OF SECURITY WALL WITH CONCERTINA COIL AT 45 WEU AT AF STN SRINAGAR
2023_MES_612234_1
CWE(AF)SGR/SGR-13/2023-24
Open Tender
Civil Works
Item Rate
180 days
AF STN SRINAGAR
AS PER NIT
8 documents required · 8 mandatory
₹1,000
GE AF SRINAGAR
₹1.7 L
Yes
28 Nov 2023
4 Aug 2023
13 Sept 2023
4 Aug 2023
11 Sept 2023
4 Sept 2023
Amount
Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 Sqm on plan and not exc 1.5m in depth in any type of soil getting out, complete all as specified and as directed.
Material and labour for PCC 1:4:8 (nominal mix) type D-2, using 40 mm graded crushed stone aggregate as in foundation filling, mass concrete, complete all as specified & directed.
Material and labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete, complete
Material and labour for reinforced cement concrete M-30, design mix as in foundation, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under reamed piles and mass concrete, complete all as specified and direceted.
Returning, filling in (soil), including spreading, levelling, watering, well ramming in layers not exc. 25cm, complete all as specified.
Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.
Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
Material and labour for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
Material and labour for cement concrete M-30, Design Mix as in Beams, cantilevers, bressummers, lintels over 1.5m span complete complete all as specified and directed.
Material and labour for form work to sides of pillars, posts, struts, columns, etc. for rough finished or flat surfaces of concrete, complete all as specified and directed.
Material and labour for reinforced cement concrete M-30, Design Mix as in columns, pillars, posts and struts, complete all as specified and directed.
Material and labour for 5mm thick plastering in CM 1:3 on fair face of brick work or concrete surfaces, surface finished even and smooth without using exter cement, complete all as specified.
Material and labour for preparation of plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.
Supply and fixing framed work such as grills grating etc ends of bars shouldered and or rivated of forged into spike ,framed guard bare iron door ladder framed balaster walk way railing framed work water tank and similar work conforming to FE-410 or FE-310 complete all as specified.
Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coats of red oxide primer all as specified.
Supply fixing Galvanished, 2 strand, steel barbed wire 2.24mm dia with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc (each line of wire to be measured) all as directed.
Supply and fixing and laying of crossed spiral concertina coil (chrome razor or blade wire) 500mm dia, madeup of 2.5 mm HTGS spring core wire having tensile strength of 1600 N/mm2 and punched tape of 0.50mm thick and 13mm wide after crimming. Punched tape shall be of hot dipped galvanised min 200 micron and having medium barbs of 24mm width @ 35mm center to centre. Each Concertina coil shall be of min 50 turns and 5 clips in two turns, i.e. 125 clips per coil. (weight of coil 14 Kgs to be streched upto 4.50 RM i.e. 3.11 Kg/RM) complete.
Fixing only punched tape concertina coil any type with and including fitting and fixture all as required
Material and labour for 18 /20mm thick pre-formed filler for expansion joints complete all as specified
Material & labour for TMT bars 10mm dia and over, cut to length beent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed.
Material & labour for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length beent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Material and labour for cement concrete type B1 1:2:4 (using 20mm graded aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M/S GHULAM AHMAD WANI
M/S M B ENTERPRISES
MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS
M/S BASHIR AND SONS
M/S BASHIR AHMAD TANTARY
M/S SUHEEL CONSTRUCTIONS
M/S MIR AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .