Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.7 CrAWARDED | ₹3.7 Cr | AWARDED |
Tender Value
₹3.5 Cr
EMD Value
₹3.5 L
Closing Date
20 Nov 2025, 10:00 pmClosed
Minor Irrigation Department
REJUVENATION OF RAVANI LIS IN MALAVALLI TALUK MANDYA DISTRICT
MI/2025-26/LI/WORK_INDENT7868
MI/2025-26/LI/WORK_INDENT7868
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
Minor Irrigation Division Mandya
₹5,000
₹3.5 L
7 Nov 2025
7 Nov 2025
21 Nov 2025
15 Nov 2025
14 Nov 2025
REJUVENATION OF RAVANI LIS IN MALAVALLI TALUK MANDYA DISTRICT
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Top cover of Rolling shutters 1.20 mm thick.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 l/10 m² complete including cost of Priming...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per r...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make bodyand seat ring of bronze PN 1.0 conforming to IS: 14845 of specified diameter with all fixturesincluding cost of all ...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-732...
Supplying, fixing and commissioning C.I Scour valve (sluice valve) of approved make bodyand seat ring of bronze PN 1.0 conforming to IS: 14846 of specified diameter and to withstand specified pressure...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting of tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle ( excluding cost of transportation ) including cost of a...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Operation & Maintenance Charges for 1 year.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Operation & Maintenance Charges for 2nd year.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Operation & Maintenance Charges for 3rd year.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Operation & Maintenance Charges for 4th year.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Operation & Maintenance Charges for 5th year.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole - 9 Mtr Long, 300 Kg WL - MS (Dwg No. BESCOM/GM/QS&...
For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessories...
250 kVA Al. Wound Transformer, 400 Amps MCCB 50kA 4 pole fixed type micro processor based for LT incomer and 3 Nos. 250 Amps MCCB 4 pole 36 kA TM Based for out going including errection charges.Comple...
11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Meterin...
Load Break Switch with Panel.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Wo...
Erection of HT metering Cubicle on Platform. - Ordinary Soil.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
30 kV 10kA Lightning Arrester Normal Duty polymeric Discharge Class -2.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
11 kV GOS : S/B 400 A.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) having specified pump o...
Supplying, transportation, errection, testing & commissioning of 90HP FCMA Soft starter LT panel 2W PLUS 1S alluminium bus bar including the following INCOMER TM Based MCCB with O/C, S/C release PLUS ...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 100 mm.Complete With all Lead and Lift and as per ...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal roportion of sa...
GI/Copper strips for grounding connections, using necessary fixing materials as required.50 x 6 mm GI strip.GI Earth strip 50 x 6 mm GI strip.Complete With all Lead and Lift and as per the directions ...
GI/Copper strips for grounding connections, using necessary fixing materials as required.50 x 6 mm GI strip.600 x 600 x 3 mm Copper plate.Complete With all Lead and Lift and as per the directions Of E...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975.95 Sqmm, (54 GI Wires - 2.5 mm Dia) ...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975.150 Sqmm, (54 GI Wires - 2.5 mm Dia)....
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.16 Sqmm, ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.7 25 Sqmm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.50 Sqmm, ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.240 Sqmm,...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable.2.5 to 25 Sqmm .Complete With all Lead and Lift and as ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable.35 to 95 Sqmm.Complete With all Lead and Lift and as pe...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable.120 to 240 Sqmm.Complete With all Lead and Lift and as ...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...
Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...
GI Pipe B - Class as per IS-1239,GI Pipe - 100 mm Dia.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.Complete With ...
Heavy Duty Copper Terminal Long Barrel.35 Sqmm Copper Terminal, Apprx Wt: 17 Gm.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Heavy Duty Copper Terminal Long Barrel.50 Sqmm Copper Terminal, Apprx Wt: 26 Gm.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Heavy Duty Copper Terminal Long Barrel.90 Sqmm Copper Terminal, Apprx Wt: 158 Gm.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Heavy Duty Copper Terminal Long Barrel.150 Sqmm Copper Terminal, Apprx Wt: 218 Gm .Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules 4C x 240 Sq mm.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Supplying of four bucket stand alongwith buckets. Complete.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Supplying of Hand gloves. Complete.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications.Complete With all Lead and Lif...
Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump above 12.50HP confirming with ISI mark and its latest amendments.Complete With all Lead and Lift and as per the...
Supplying & Laying cable trays including welding, fixing of supports.Cable tray of 600 mm width (suitable for cable ducts of A, B & C type)-indoor and outdoor.Complete With all Lead and Lift and as pe...
Supplying, fixing and commissioning C.I Scour valve (sluice valve) of approved make bodyand seat ring of bronze PN 1.0 conforming to IS: 14846 of specified diameter and to withstand specified pressure...
Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make bodyand seat ring of bronze PN 1.0 conforming to IS: 14845 of specified diameter with all fixturesincluding cost of all ...
Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make bodyand seat ring of bronze PN 1.0 conforming to IS: 14845 of specified diameter with all fixturesincluding cost of all ...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Supply, delivery and erection at site brand new Dorot/Erhard make pilot operated pressure relief valve of 100mm dia with maximum permissible pressure (7.1 kg/cm2) with the following specifications.-1....
Providing and fixing Wafer type single flange Butterfly valve conforming to relevant IS 13099/9991 EN GGG40/50 with latest amendments as detailed below of the following diameter and types with TP se...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specified...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...
Running Single Circuit 11 kV, 3 Phase Power Line On 9 Mtr Supports With An Average Span Of 40 Mtr Using RABBIT ACSR Conductor.Complete With all Lead and Lift and as per the directions Of Engineer in C...
Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying of ......feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated ...
Supply of LED Ploodtlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying andFixing........mmdiaclampsssAGIpipe bracket upto 2.7meters long terminatedwitha reducing collar of 40x25mm to whichextrapipeof175mmlengthisfixedforfixingMV/SV/MH/FTL street light fittin...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch.Complete With all Lead and Lift and as per the directio...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switch.Complete With all Lead and Lift and as per the directions O...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch.Complete With all Lead and Lift and as per the directions ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket.Complete With all Lead and Lift and as per the directi...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying, fixing andwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.32-40A 2 pole-Complete With all Lead and Lift and as per the directions Of...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Ratedvoltage 220 V/ 50 Hz, Rated power input...
Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply. 400mm Sweep-Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Supplying & Laying cable trays including welding, fixing of supports.Cable tray of 600 mm width (suitable for cable ducts of A, B & C type)-Complete With all Lead and Lift and as per the directions Of...
Supply Of First Aid Box.Complete With all Lead and Lift and as per the directions Of Engineer in Charge Of The Work.
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .