Supply, delivery of following pump-motor set and other electro mechanical components at Panisala and adjacent Water Supply Scheme in the dist. of Coochbehar under NMD-II, PHE. Dte.

Amount

Supply and delivery at site of the following submersible pumping machinery and electrical accessories:

Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : Pump Duty condition-55 m3/Hr Head- 45 Mtr Shaft-stainless steel Impeller- S.S/ GM Outlet Size: 80 mm. Motor submersible type 3 Ph , 50Hz, 415 Volt± 10% 2900 RPM Motor must be suitable for operation with Star-Delta starter. Test certificate along with characteristic curve should be submitted at the time of delivery

80 mm dia CIDF sluice valve-2 nos., Non Return Valve-1 no., CIDF 90° bend-1 no., Cl flanged tee-lno. blank flange-1 no., Cl/ MS flanged short piece 0.50 mtr.-1 no, Cl/ MS flanged pipe 1 mtr. 1 no. etc as per IS specification and certification for Construction of delivery pipe line and wash out line.(PN rating 1.0)

Pressure gauge [H.Gur u/ Febi g] 150 mm dia [0-7Kg/Sq.cm] brass cock and fitting complete[This cost includes 15 mm. dia G.I. pipes and specials]

100 Amps porcelin based rewirable type male female kit Kat fuse unit.

100 Amp, 415 V TPN Rewireable type TPN Main switch

Microprocessor based Motor Protection relay having 240 V AC relay range of (16-44) Amp. and specification of Overload, Earth Fault, Locked Rotor, Single Phasing, Current Unbalance, Phase Sequence Reversal, Under Current. (Approved make of PHE Dte.)

ALV D2 Phase Failure Relay - having a protection of Pahse failure, Phase sequence, unbalane, under voltage, over voltage, Auto reset, fixed unbalance setting, adjustable UV/OV setting and coil voltage of (220-230-240) Volt or (380-415-440), 50 HZ. (Approved make of PHE Dte.)

"Supply, delivery & storage at site of automatically controlled diaphragm type Chlorinator dosing Pump with flow rate 100 LPH and maximum pressure of 10 kg/cm2 with all accessories for pump and motor , foundation bolt , suction and discharge flange and with storage tank of dosing solution of 100 liter capacity and the prime mover to be coupled with pump of 0.5 HP, 3 phase , 1450 RPM ,squirrel cage TEFC induction motor , Motor will be IE3. [ Test & Warranty Certificates are to be submitted at the time of delivery ]

Add GST @18%

GEETA CONSTRUCTION

Haragouri Enterprise