construction of Forest Guard Hut at Kunah, Magazine Beat Block Surkhigala, Forest ange Dalhousie under Forest Division Dalhousie during the year 2021-22 including septic tank and Boundary wall

Amount

construction of Forest Guard Hut at Kunah

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering - All work up to plinth level

1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm norninal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto. plinth level with

in cement mortar 1:6 (1:cement : 6 sand)

Centering and shuttering including strutting, propping etc. and removal of form for :

Lintels, beams, plinth beams, girders, bressumers and cantilevers

uspended floors, roofs, landings, balconies and access platform

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Brick work with common bumt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth leyel up to floor V level in all shapes and sizes in

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) .2nd class Sal wood

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Roofing

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Plain Ridges

Providing and fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately) Eave boards

Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Providing and fxung 1st quality ceramic glazed tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in al colours, shades exoept burgundy, bote green, black of any size as approved by Engineer-in-Charge in skirting, nisers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement 3 coarse sand) and joinung with grey cement slurry @ 3 3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and foxing 1st quality ceramic glazed tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy. bottle green, black of any size as apPproved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement 3 coarse sand) and jointing with grey cement slurry @ 3,3kg per sqm including pointing in white cement mored with pigment of matching shade complete

15 mm cement plaster on the rough side of single or half brick wall of mix sin ratio 16 (1 Cementi6 Coarse sand)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Steel Work welded in built up section /framed work ,including cutting , hosting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

In strings , treads, landings etc. of stair cases, including use of chequered plate whrerever required, all complete

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class Teak Wood

Providing and foxing wire gauge shutters using galvanized M.S Mire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick Second class Teak wood

Providing and fixing bright finished brass siding door bolts anodized colour and shade with bolts and nuts screws etc complete

Providing and fixing aluminium tower bolt, ISI marke,andised (anodic coating not less then grade AC 10 as per Is : 1868) transparent or dyed to requried color or shape, with necessary screws

Providing and fixing ISI marked oxidised M.S. Handles conforming to IS: 4992 with necessary screws, etc. complete.

Providing and fixing bright finised brass hanging typs floor door stopper with necessary screws, etc. complete.

Provide and fixing 100mm bright finised hard down hook and eyes.

Providing and fixing flat and pressed 3 layer medium density partical board or graded partile board (Grade 1) IS : 3087 marked in ceiling with necessary nails etc. complete (Frame work to be paid separetly) 12mm thick

Distemping with oil bound washable distemper or pproved brand and manufacture and of required shade on undecorated wall serfaces to give an evenshade over and include a p.

New work (Two or more coats ) over and including thinnable priming coat with cement primer

Finishing wall with water proofing cement paint of requried shade

New work ( Two or more coats applied @3.84kg/10Sqm)

Appling priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard & soft wood)

Painting with synthetic enamel paint of approved brand and manufature to give an even shade

two or more coats on new wood

Making plinth protection 50mm thik with cement concrete 1:3:6 (1Cement: 3sand: 6 Graded stone aggregate 20mm naminal size)over 75mm thik bed of dry brick ballast 40mm naminal size, well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing incuding finishing the top smooth

Constructing Coursed rubble hammer dressed "U" shape open surface drain with side wall 15x22cm in cement mortar 1:6 (1 cement:6 sand ) and inside plastering with cement mortar 1:3 ( 1cement : 3sand ) including earth work and laying 10cm cement concrete 1:5:10(1 cement : 5sand ;10 grade stone aggregate 40mm naminal size) and 705cm. cement concrete 1:2:4 (1cement : 2sand : 4 graded stone aggregate 20mm naminal size) and finished with a floating coat of neat cement complete as per standard design.

Providing 40x5mm flat iron hold 40cm fast 40cm long including fixing to frame with 10mm diameter bolts, nut and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1cement :3coarse sand : 6graded stone aggregate 20mm naminal size).

Septic Tank

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming f bottoms, lift upto 1.5 m, including getting aut the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering. shuttering: - All work up to plinth level:

1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.PS. (non modular) bricks of class designation 75 in superstructure upto plinth level in all shapes and sizes in

15 mm cement plaster on the rough side of single or half brick wall of mix in ratio 1.6 (1 Cement6 Coarse sand)

Cement concrete flooring 1:2:4 (1 Cement: 2 Sand 4 graded stone aggregate) with 40mm thick with 20 mm nominal size stone aggregate

Centering and shuttering including strutting. propping etc. and removal of form for

Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand) 3 graded stone aggregate 20 mm nominal size).

Boulder/brick pieces, gravel filling in soak pit.

construction of Boundary wall to Forest Guard Hut at Magzeen

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated sols as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering - All work up to plinth level:

1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40mm naminal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1.6:12 (1 cement :6.coarse sand 12 graded stone aggregate 20 mm nominal size) upto plinth level with

in cement mortar 1:6 (1 cement : 6 sand

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement:6 coarse sand: 12 graded stone aggregate 20 mm nominal size) Above plinth level with:

in cement mortar 1:6 (1.cement 6 sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in

Half brick masonry work with common burnt ciay FP.S. (non maduler) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:

15 mm cemernt plaster on the rough sicle of single or haif brick wall of mox cin ratio 1:6 ( 1 Cement6 Coarse sand)

Providing and fixing MS grill of required pattern in wooding frames of windows etc. plain grill for Gate

Finishing wall with water proofing cement paint of required shade new work ( Two or maor coats applied @3.84 kg /10Sqm)

Appling priming coat with ready mixed red oxide chromate primer of approve brand and manufature of steel work

Painting with synthetic enamel paint of approved brand & manufature to give an even shade with two or more coats on new work

Providing under laying damp proof course to horizontal surface with cement concrete 1:2:4 for coping and curing complete . 20mm thik

Raj Kumar

RAMESH KUMAR

RAJEEV KUMAR