S and F Equipment for Open Gym at Various Places in Jaisalmer Nagar Parishad Area

Amount

Seated Puller dimension :- 1778mm (length) X 685 mm (width) X2280 mm (Height.) Safe Area : - 3Mtr. X 1.25 mtr. Seatae puller equipment ie Made of form MS Pipe of different NB.NB siands for nominal bore sizes i.e. internal diameter of pipe in milimeters. Tha Central main frama is made up of combination of Ø90mm x3mm thick & 100mm X 50mm MS PIPE and CR sheet (20"X12") of 16 guage for support & display. Bottom frame Is made up of Ø90mm X 3mm thick MS pipe. All linkages, handle frame and seat frame are made up of Ø50mm pipe of heavy gauge. The seat frame is made up of (100mm X 50mm) MS pipe. In L & trapezium shape for support. To build structure bushes are used which are made from M.S tgamless pipe of 63mm O.D and 10mm thickness. The bearing used are ball bearing 6205 zz permanent lubricated sealed bearing of reputed brand. The main frame and the linkage are fixed on the 10mm thick plate, the bearing shaft of Ø25mm dia is fixed on the capsule hole on the ends and covered with 70mm & 10mm thick plate, this cover of chakkar plate & flal (30.48mm) is welded on the border. The linkage Frame and the handle are fixed on the 571mm x 6mm thick plate, the bearing shaft of 25mm dia is fixed on the capsule hole on the ends of thick plate and covered with 70mm & 10mm thick plate, this cover is designed in such a way that it should cover the outer portion of the shaft and fixed by the spring lock and the high tensile steel with galvanized bolts. Same on each every linkage joint. The foundation used for fixing the frame and the pillars is made from the combination of 12 rod and the 4 thick plate (Ø228.6mm &8mm), the rod is 760 mm long and 3/4" thick & at the one end of the rod BSW threading is done for the adjustment of the Jevel of the main

TRIPLE TWISTER DIMESNION: - 1980MM (LENTH) x 1980 mm (WIDTH) X 20BO mm (HEIGHT.) SAFE AREA: - 2.5Mtr. X 2.5 Mtr. Triple twitter equipment is made from MS pipe of different NB for nominal bore sizes i.a. internal diameter of pipe in millimeters. Tha Central main pipe is Ø115mm X 5mm thick MS pipe. The bottom of central pipe is welded with support of MS round plate Ø225mm & 8mm thick. The bottom of frame is made from 90mm X 3mm thick MS pipe each bottom frame are connected to central pipe with two half curved 9haped MS flat(100mm X 203mm) The handle frame is of 35 OD X3mm thick made form MS pipe In capsule shape. There is hole of 25rnrn on base plate for the adjustment the level of the equlpment. Pins used of diameter. 35mm are made from SAE 8620 bright material there are two types of bearing used tapered bearing and ball bearing (6306 zz permanent lubricated sealed bearing) of reputed brand the whole console of pins is designed in lock and key and the the spacial '' TT'' spring lock pattern is used so that the bearing and the P!ate console cannot be taken out there will be special spring lock between the bearing block for safety. High tensilg steel with galvanized nuts and bolts are used for assembly. The specialized powder coating of texture colour used. The foundation used for fixing the central pole made from the combination of 3rod and the Ø225mm & 8mm thick M.S plate the rod is 760mm long and 3/4" thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these three rods are welded together with 35mm x 35mm M5 Angle of 5mm thickness.

PARALLEL BAR DIPS DIMENSION:- 1700MM (LENTH) X685 MM (WIDTH)1930 MM (HIGHT) SAFE AREA: - 2 mtr. x 1 mtr. Parallel bar dips equipment is made up from MS pipe of different NB. NB stands for nominal bore size i.e. internel diameter of pipe in millimeters. The Central main frame is made up of combination of (Ø90m X3mm thick & 100 mmx50mm MS pipe and CR sheet (20X12) of 16 gaugre for support and display. Bottom frame is made up of (90mm X3mm) thick MS pipe 1676 mm long & 279 mm height. The linkage handle for the parallel bar dips are made up to 50mm MS pipe of heavy gauge. Both the side handles are kept at different level so that everyone can use it at one end handle should be at 1041mm height from the base frame and other at 914mm height from the base frame, High tensile steel with galvanized nuts and bolts are used for assembly. The specialized powder coating of texture colour is used. The foundation used for fixing the one side of bottom frame is made form. the combination of 6 rod and the 2 thick plate (228.6mm&8mm) the rod is 760mm long and ’3/4" thick and at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded together with support 35mmX35mm MS angle of hmm thickness and the adjustment is done by the nuts.

ABDOMINAL BOARD Dimension:- 1930mm (length) X 1778 mm (Width) X 1498 mm (Height) Safe Area:- 2.5 Mm. X 2 Mtr. The ABDOMINAL BOARD equipment is made from MS PIPE of different NB.NB stands for nominal bore sizes i.e internal diameters of pipe in millimeters. The Central main frame in made up of combination of M.S pipe ( Ø90mm X 3mm) thick & (100 mm X 50mm) and CR sheet (20“X12") of 16 gauge for support and display. The frame of sit up board is having boundary of 25.4mm MS pipe and Capsule MS Pipe (63mm X25.4mm) placed horizontally though out the frame the sit up board is supported by (10Omm X50mm) MS pipe. The Remaining frame of sit up board is made up to combination of MS pipe (90 mm X 3mm thick) as pillars set up certain degree & (100 mm X 50mm) MS pipe for supporting the main frame and the sit up board frame the leg support is made up Of ( Ø90mm X 533mm) MS pipe long are joint together by capsule pipe (65mm) ends of the leg support should be covered with ABS covering The bottom Of central frame is supported by MS round plate of Ø228.6mM & 8mm thick. The foundalion used for fixing the main frame is made from the Combination of 6rod and the 2 thick plate ( Ø228.6mm & 8mm) the rod iS 76Omm long and 3/4" thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded together with support 35 mm X 35mm MS angle of 5mm thicknecs end the adjustment is done by the nuts and

LEG PRESS Dimension:- 2220mm (Length) X 685 mm (width) X 2311 mm (height) safe Area:- 3.15 Mtr X 1.5 Mtr. Leg press equipment is made from MS pipe of different NB. NB Stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. The main frame is of Ø90mm X 3mm thick & 100mm X 50mm MS PIPE and CR sheet (20“X12") of 16 gauge for support & display The bottom of central frame is welded a pair of support of MS round plate of 225mm & 8mm thick. For maintaining the posture the rubber handle is placed on the main sleeve frame on 25.4NB. The sleeve frame is made up of 63.5NB, this sleeve can be disassembled from main frame the sleeve frame is supported by 63.5NB from top and 50.8 NB from mid. There are holes of 25mm on base plate for the adjustment of level of the equipment. Foot rest in made up of combination of chakkar plate & flat (30.48mm) is welded on the border. The foot rest (150mm X 350mm) is fixed on the MS frame of (100mmx50mm) the MS frame is made little tapered. The bearing used are ball bearing 6205 permanent lubricated sealed bearing of reputed brand. The pins used are made up of 25mm SAE 8620 bring material. To build structure bushes are used which are made from MS seamless pipe of 80mm O.D and 10mm thickness Seat and back rest provided are made up of CR MS sheet the sheet is supported by the heavy gauge channel the sheet has uniform border with on joints. High tensile steel with galvanized nuts and bolts are used for assembly.The specialized powder coating of texture colour is used.

AIR WALKER dimension:- 2501 mm (Iength)X76 (Width) X2095 mm (Height) safe Area:- 2.5 mtr X 1.9 mtr. The air equipment is made from MS PIPE Of different NB. NB for nominal bore sizes. i.e. Internal diameter pf pipe in mm. the central main frame is made Up Of Combination of dia Ø90 mm x 3mm thick & 100 mm x 50 mm MS pipe and CR sheet (20" x 12") of 16 gauge for support and display. The pillars of main frame are made up of dia 90 mm x 3 mm thick MS pipe, To build structure Dushes are Msed which are made from MS seamless pipe of 63 mm OD and 10 mm thickness. the sleeve frame is made up of 63.5 NB, this sleeve can be disassembled from main frame, the sleeve is supported with flat & o 63 mm MS pipe from the top and at the other end foot rest is attached with two flat (254 mm x 63 mmm) The MS pipe of dia 50 mm is bended in "c" from to attech the main frame and pillars. The foot rest (152 mm x 368 mm) is fixed on the sleeve frame, foot rest is made up of combinalion of chakkar plate & flat (30.48mm) is welded on border. The main frame and pillars are attached with Supporting pillars dia 50 mm MS pipe. For safety and supporting reasons. the foundation used for fixing the main frame and the pillars is made from the combination of 12 rod and the 4 thick plate (dia 228.6 mm & 8 mm) the rod is 760 mm long and 3/4" thick & at the one end of the rod BSW threading is done for adjustment of the level of the main frame, these 12 rods are welded together with support 35 mm x 35 mm MS angle of 5 mm thickness and adjustment is done by the nuts & the supporting pillars.

Cross walker Dimension: - 1930 mm (length) x 990 mm (width) x 1778 (height). Safe area: - 2.5 mtr x 1.5 mtr. The cross walker equipment is made from MS pipe of different Ne. NB stands for nominal bore sizes. i.e. Internal diameter of pipe in millimeter. The main frame is made up of combination dia 90mm x 3mm thick M.S pipe, 100mm x 50mm MS PIPE and CR sheet (20"x 12") of 16 gauge for support and display & the Supporting frame is made up of combination 90mm x 3mm thick MS pipe & 100mm x 50mm MS PIPE, both the main frame and Supporting frame ar joined together through 100mm x 50mm MS PIPE. The Handte frame is made up to dia 50mm M.S pipe & 35mm M.S Pipe. To build structure bushes are used which are made from M.S Seamless pipe of 63 O.D and 10mm thickness. The linkage Frame consist of portion, Each portion is made up Of combination M.S pipe (50mm square) and M.S flat (50mm x 5mm thick) on both the side and The foot rest (152mm x 368mm) is fixed on the both the ends of each portion, foot rest is made up combination of chakkar plate & flat (30.48mm) is welded on the border. The linkage Frame and the handle are fixed on the 571mm X 6mm thi¢k plate, the bearing shaft of 25mm dia is fixed on the capsule hole on the ends of thick plate and covered with 70mm & 10mm thick plate, this cover is designed in such a way that it should cover the outer portion of the shaft and fixed by the spring lock and the high tensile steel with galvanized bolts. Same on each every linkage joint. The foundation used for fixing the frame and the pillars is made from the Combination of 12 rod and the 4 thick plate (dia 228.6mm & 8mm ) the rod is 760 mm long and 3/4" thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main

Khalsa Exports Pvt. Ltd.

Shreenath Trading Company

M/s NITIN CONSTRUCTION COMPANY AND SUPPLIERS

M/s Anand Construction Company