PROVN OF TRAINING SHEDS AT INTEGRATED TRG AREA TRG BN-2 BEG AND CENTRE, DIGHI CAMP UNDER AGE B/R-II IN GE (CENTRAL) KHADKI.

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Excavating in trenches, n exc. 1.5 m wide and n.exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sq.m on plan and n.exc. 1.5 m in depth and getting out in any type any type of soil complete all as specified and as directed.

Excavating in trenches, n exc. 1.5 m wide and n.exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sq.m on plan and n.exc. 1.5 m in depth and getting out in hrad rock complete all as specified and as directed.

Excavating in trenches, n exc. 1.5 m wide and n.exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sq.m on plan and exc. 1.5 m but n. exc 3.00m in depth and getting out in any type any type of soil complete all as specified and as directed.

Excavating in trenches, n exc. 1.5 m wide and n.exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sq.m on plan and exc. 1.5 m but n. exc 3.00m in depth and getting out in hard rock complete all as specified and as directed.

Material and labour for plain cement concrete, (1:4:8), type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour form work to sides of concrete foundations, footings bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation plinth beam and similar work vertical or bottom rough finished surfaces of concrete in flat and curved surfaces complete all as specificed and as directed.

Material and labour form work to sides of pillars, posts, struts, piers, columns rough finished surfaces square, rectangular or polygonal complete all as specificed and as directed.

Material and labour form work to sides and soffits of floor or roof beams, beams haunching, girders, bressumers, lintels, cantilevers shelves including supports overhangs etc, also splays between floors and beams etc flat rough finished surface complete all as specificed and as directed.

Material and labour form work to chullah hoods, chajja, trough and similar items inlcuding edges complete all as specificed and as directed.

Material and labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

Material and labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in columns etc. complete all as specified and as directed.

Material and labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof beams & lintel beam, gable beam etc. complete all as specified and as directed.

Material and labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in Chajjas/canopy etc complete all as specified and as directed.

Material and labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to grade of steel Fe 500D complete all as specified and as directed.

Material and labour TMT bars 5mm dia and over up to and including 10 mm dia cut to length bend to shape required including cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups, spacers and binders confirming to grade of steel Fe 500D complete all as specified and as directed.

Material and labour for hard core of broken stone aggregates of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface including compacted with mechanical roller complete all as specified and as directed.

Material and labour for 100 mm thick plain cement concrete (1:4:8), type D2, using 40 mm graded stone aggregate under floors, as in sub base of floors complete all as specified and as directed.

Material and labour Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering including compacted with mechanical roller complete all as specified and as directed.

Material and labour 38 mm width glass dividing strips, 3mm thick complete all as specified and as directed.

Material and labour for 100mm thick plain cement concrete (1:2:4), type B1, using 20 mm graded stone aggregate as in flooring finished even and smooth using extra cement including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed by Engr-in-charge.

Material and labour 75mm thick Plain Cement concrete (1:3:6) Type C-2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement and providing necessary joints at every 3.00 interval and at corners complete all as as specified and as directed by Engr-in-Charge.

Returning and filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing of excavated material n.exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Supply and fix rolled mild steel structural sections as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming Fe-410- W(Gde- E-250) quality- A etc., complete all as secified and as directed.

Supply and fix rolled mild steel bolts with diameter of neck exc. 12 mm and n.exc. 20 mm with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut but length of bolts exc 5CM but n.exc 15 cm long of diameter of shank 11 to 15 mm complete all as secified and as directed.

Supply and fix rolled mild steel structural sections such as purlins, joist, channel, angle, tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) in available lengths of grade Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed. NOTE :- Truss Design Refer TD Drg No CEPZ/88/TD/14/STR Sheet No 1 to 3 dated 02 Sep 1988 )

Supply and fix rolled mild steel structural sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) confirming Fe-410- W(Gde- E-250) quality- A including distance pieces, cleats etc. complete all as secified and as directed. NOTE :- Truss Design Refer TD Drg No CEPZ/88/TD/14/STR Sheet No 1 to 3 dated 02 Sep 1988 )

Material and labour preparation of new or previously untreated surfaces of steel, over 10cm in width or girth, not otherwise described applying two coats of synthetic enamel (ordinary tint) paint over one coat of red oxide primer complete all as specified and as directed.

Supply and fix for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. NOTE :- Corrugated profile shall be approved by Garrison Engineer

Supply and fix for pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for providing, cement concrete type B-0 using 12.5 mm aggregate as in copings, kneelers, apex stones, bed plates, kerbs not provided for in Item water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Material and labour for precast cement concrete block masonry using type C1, (1:3:6), using 20 mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

Material and labour for rendering 15 mm thick on RCC surfaces or PCC block masonry wall in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on RCC surfaces /PCC block masonry wall using CM (1:4) mixed with and including integral water proofing compound @ 3% by weight of cement finished even and smooth (without using extra cement) etc complete all as specified and as directed. NOTE :- Rate for WPC deemed to be included in quoted rate.

Material and labour for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of alkali resistant primer etc complete all as specified and directed

Material and labour preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer etc complete all as specified and directed.

Material and labour for black granite work 18 to 20 mm thick (table rubbed and polished ) as jambs, pillars, and cladding to wall or vertical surface of wall, and like over newly plastered surfaces including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing, polishing and rounding to edges complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm dia SS wire mesh and fittings etc complete all as specified and as directed by Engr-in-Charge.

Supply and fix steel rolling shutters (Gear Operated), with thickness of laths 1.25mm complete with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete pull push or manual type complete all as specified and as directed.

Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm (nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volts grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly for one light point or one fan point controlled by one, one way switch including PVC switch board of required size for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and as directed.

Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm (nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volts grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly for one 5 Amps socket point independent including PVC switch board of required size for mounting of switch, socket all as specified and as directed.

Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 2.5 sq.mm (nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 2.5 sq.mm as earth lead and connected to earth dolly for one 16 Amps socket (power) point independent including PVC switch board of required size for mounting of switch, socket all as specified and as directed.

Material and labour for surface submain wiring with two single core PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 2.5 sq.mm (nominal area) drawn through in and including PVC casing caping / PVC conduit of suitable size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volts grade multi stranded FRLSH Copper conductor cable of size 2.5 sq,mm as earth lead and connected to earth dolly including dismantling / taking down old unserviceable wiring and making good to disturbed surfaces all as specified and as directed. NOTE:- Two runs of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Supply and fix switch piano type 5 Amps, single pole, one way all as specified and as directed.

Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 5 Amps, 230 volts all as specified and as directed.

Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 Amps and 3 pin 6 Amps, 230 volts all as specified and as directed.

Supply and fix ceiling rose surface bakelite three terminals all as specified and as directed.

Supply and fix flush type electronic fan regulator with 5 step type,100 Watts, AC, 240 Volts, 50 Hz all as specified and as directed.

Supply and fix MCB, single pole, 6 to 32 Amps, 240 Volts, 10 KA breaking capacity, ‘’C” curve all as specified and as directed.

Supply and fix MCB, four pole, 40 to 63 Amps, 415 Volts all as specified and as directed.

Supply and fix MCB distribution board, double door, metal enclosure, SPN, 230 Volts, 8 way all as specified and as directed.

Supply and fix VTPN DB double door type, 415 volts with MCCB 4 pole 63 Amps as incoming complete all as specified and as directed.

Supply and fix LED tube light fitting, 20 watts, integrated LED batten with aluminium housing , 230 Volts, 4 feet long, complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sq.mm three core copper flexible conductor cable all as specified and as directed. MAKE:- Wipro Cat No. LL20-281-XXX-65AL1 or techno commercially equivalent in Philips/C&S

Supply and fix Energy saving ceiling fans, 230 Volts, 26 Watts, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufacturers, with latest BEE five star rating and BLDC technology all as per Havells Model No :- Efficiencia Neo (BLDC 26W) or techno commercially equivalent models specified in Bajaj / Usha complete with down rod and GI hook with welding work, wire connections from ceiling rose to ceiling fans, with complete accessories including writing of MES No with unit name on ceiling fans using approved stencil with synthetic enamal paint complete all as specified and as directed.

Material and labour for bore type chemical earthing complete with GI electrode of 50mm bore buried in 3 mtr depth with ground enhancing backfill compound (Safe ground) , the compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and should have best moisture retaining quality including necessary returning filling in & removal all as specified and directed by Engr-in-charge. MAKE :- U-Protec or its equivalent.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq.mm 3.5 core complete all as specified and as directed.

Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth and getting out in soft / loose soil for cable trench / stay assembly etc., complete all as specified and as directed.

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5m in depth and getting out in soft disintegrated rock

Supply and lay reinforced precast cement concrete cable covers, class LV type 1, flat of size 250 mm x 150mm x 40 mm with ISI mark embosed on it, factory made, complete all as specified and as directed.

Suraj Sukhdev More

M/S SANDEEP CONSTRUCTION COMPANY

M/s DEVRATAN ENTERPRISES

UNIQUE ENGINEERS

GRACE CONSTRUCTIONS

Om Construction

Ajinkya Constructions