Repair and Maintenance of Rettaimalai Srinivasan Pettai Community Toilet ward no 01 in Thirupathur Municipality

Dismanteling of Floor tiles in toilet portion etc.

Supplying and Filling of stone dust in foundation and basement in layers of 10cm thick including watering and ramming to consolidation etc.

C.C 1:4:8 mix (one cement and four sand and eight metal) using 40 mm Metal etc.incuding dewatering wherever etc..complete as per standard specification

Brickwork in Cement Mortor 1:5 (One cement five sand) mix using country burnt of standard size 8 3/4"x4 1/4"x2 1/4" including cost and conveyance of all materials and labour etc complete as per standard specifications

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white / colour glazed European water closet of best quality and approved make with 100mm "P" and "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC back seat and seat cover with CP brass hinges including cost of white cement for packing, spun yarn, teak wood plugs, brass screws etc. including supplyng and fixing 10 litres capacity PVC / 12.5 litres capacity poceiln low level flushing tank with a pair of CI brackets etc. complete with all fittings such as 15mm brass ball valve with polythene float wtih brass handle, union, coupling, connecting by means of 40mm white PVC flush hand using indian adoptor joint including all internal fittings.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Paving the floor with design joint free ceramic tiles (colour and shade as directed) of size 300 mm x 300mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc., Complete Complying with standard specification.

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil)

Supply and delivery of LED INDOOR FITTINGS (LIGHT EMITTING DIODE) 18W LED 3000K Round Type Recessed Fitting with LED

Supply and delivery of LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) 25W LED Street Light Fitting with LED

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point

White washing one coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers

Painting two coats for Exterior surface with approved Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supply of different designs of dustbins made of six layer bonding of glass fibre such as Fish Dustbin (2.75 Ft ht), Rabbit Dustbin (2.75 Ft ht), Monkey Dustbin (2.75 Ft ht), Cartoon Duck Dustbin (3.25 Ft ht), and Penguin Dustbin (2.75 Ft ht), including material cost conveyance charges as per the specifications directed by the department officers

Supply and fixing of 110 mm pvc pipe including cost and conveyance of all materials fixing charges etc complete as per standard specification

Supplying and fixing of NB 10 Wall mounting incinerator dimension of 235x235x430 mm weight of 15kg including cost and conveyance of materials and labour charges etc complete as per standard specification Burning Capacity 140 Nos per day

Supply and fixing of Sanitary Napkin Vending Machine (Capacity 35 Nos) including cost and conveyance of materials and labour charges etc complete as per standard specification

Supply and fixing of Hand dryer (SS Body) including cost and conveyance of materials and labour charges etc complete as per standard specification

Supplying and fixing mirror including all charges etc complete

Provision for Hand Rails to Disabale person supports including cost and conveyance of materials and labour charges etc complete as per standard specification

Provision for Rain Water Harvesting including Earth work, Metals, pipe & Rings including cost and conveyance of materials and labour charges etc complete as per standard specification

Please Enable Macros to View BoQ information