SPECIAL REPAIR TO ROAD BEHIND GSSI AREA AND QUARTER GUARD AND INTERNAL ROAD OF MT AREA FROM FUEL PUMP TO SHED NO 93 2 AT CME

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exceeding 400 Sqm and depth exc 50mm and n exc 100mm complete and removing unserviceable material outside MD land complete all as specified and as directed.

M & L for 75mm thick (compacted thickness) WBM, with coarse aggregates using granite, trap or basalt stone of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to required gradient and camber using 8 to 10 tonne power roller complete all as specified and as directed.

All as per item No 2 above but except materials. Note: Serviceable material obtained from item No 1 shall be used under this item.

M & L for repairs to pot holes any depth n,exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 25mm in depth, making good by applying tack coat @ 5Kg per 10Sqm of paving bitumen (VG-10), putting in premix bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm of paving bitumen (VG-30), blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm complete all as specified and as directed.

M & L for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and as directed.

M & L for applying evenly a tack coat with bituminous primer (Paving bitumen of grade VG-10 grade bitumen) @ 10 kg per 10 Sqm over water bound macadam complete all as specified and as directed.

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and as directed.

M & L for premixed bituminous macadam with binder content @ (VG-30) 4% by weight of total mix (Job Mix) laid / rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 75 mm or less as per site requirement of site) laid/ rolled and compacted to required gradient and camber complete all as specified and directed.

M & L for applying a tack coat with VG 10 grade bitumen @ 5kg/10sqm for laying semidense asphaltic concrete over existing black top surface all as specified and directed

M & L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- (i) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle Number.

M & L for preparation of new or previously treated road black top surfaces of road and applying 2.5 mm thick retro-reflective thermoplastic road marking paint @5kg/sqm, mixed with glass beads @250gm/sqm as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm width, by mechanical machine ie dispenser machine , white or golden yellow as per IRC pattern including cleaning of road surface free from dust & moisture complete all as specified and as directed. Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi) as approved by GE

S & F ABS speed breaker rumbler model No OS-792 including fixing with epoxy compound and anchoring with nails complete all as directed by Engineer-in-Charge including taking down old unserviceable one. Make : 3M or equivalent as approved by GE.

S & F in repair caution / informatory sign board (Speed limit sign board, Stop and Yeild sign board, Speed breaker sign board) of 3mm thick aluminium composite panel of size 600mmx600mmx600mm in equilateral triangle / circular shape (as per IRC-67-2001) comprising one side high intensity prismatic grade retro reflective sheeting as base and cut out cautionary sign with high intensity prismatic grade retro reflective sheeting, other side of board shall be treated with epoxy powder coating board of any size and shape fixed using screws to MS pipe 40mm bore with one leg of 1.8 mtr including painting of legs in zebra pattern using two coats of synthetic enamel paint complete including excavation in post holes in hard/dense soil, filling mass concrete (1:4:8) type D2 using 20mm graded stone aggregate as in foundation (0.45mx0.45mx0.6m), removal of surplus soil and making good existing surfaces complete all as specified and directed.

M/s ESS KAY Construction

MOHANLAL MATHRANI CONS. PVT. LTD.

Sunshine Ventures