PROVN OF TOILET BLOCK NEAR UNIT EXCHANGE AND NEAR DUTY POST AT WESTERN BOUNDARY AT KLP LOC OF 172 INF BN (TA) MADRAS AND OTHER SANCTIONED WORKS UNDER GE BRICHGUNJ SRI VIJAYAPURAM

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified.

M&L for PCC in foundation filling and mass concrete type C2 1:3:6 (40mm graded stone aggregate) all as specified.

S&F MS steel work in tubular, trusses incl purlins, special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade 240 all as specified.

S&F MS works as in wind ties for roof including securing bolts etc complete all as specified.

M&L for plates of plain or chequered, square cut or notched of steel welded to steel structure for base plate etc.

M&L for prepainted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of colour having tesile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified.

M&L for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of colour having tesile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surfaces over 10cm width or girth all as specified.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil all as specified.

M&L for PCC 1:4:8, type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type Cl (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:6 complete all as specified and directed

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L Removing excavated soil to a distance n.exc 50 m and depositing as specified.

M&L rendering 10 mm thick on fair faces of concrete/block masonry surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

Supply only Integral water proofing compound

M&L preparing newly plastered surfaces and tractor 2 coats of Oil Bound Distemper over a coat of alkali resistent primer incl putty with smooth finish on walls. Complete all as specified and directed.

All as per item no 16 above but on Ceiling surfaces

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including prepartion and applying priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M&L for hard core of guage n.exc.63mm using broken stone aggregate spread, levelled, watered and rammed to a true surface.

M&L 75 mm thick PCC1:3:6 Type C-2 for Plinth Protection Complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out in hard/ dense soil Complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B2 as in base to floor. Complete all as specified and directed.

M&L Removing excavated soil to a distance n.exc 50 m and depositing as specified.

Material and labour for Machine pressed precast concrete interlocking paver block with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, over and including 50mm consolidated thick sand cushioning including watering and consolidation for base/ bed all as specified a complete all as specified.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 sq mm.

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

S&F tube light grade galvanised with all fittings laid in trenches of following size. 50 mm bore.

Material and Labour for cutting bituminous road at a width not more than 30cm and a depth not exceeding 60 cm for laying of pipes on road crossing for cable protection and making good with cement concrete 1:2:4, type, B-2 to match the existing surfaces of the road all as specified and as directed by Engineer in charge.

M&L for RCC M-30 Design Mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed

M&L for RCC- M-30 Design Mix as in columns, pillars, piers,posts and struts as specified and directed

M&L for RCC- M -30 Design Mix as in beams, cantilevers,bressummers, lintels over 1.5m span as specified and directed

M&L for RCC- M-30 Design Mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed

M&L for RCC- M-30 Design Mix as in chajjas etc complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Form work to sides of pillars, posts, struts, piers, columns and stanchions

Form work to sides and sofit of Beams for fair finished surfaces.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping)

Formwork to chullah hoods, chajjas, troughs and similar items including edges

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in benching to manholes and finishing of exposed surfaces of concrete etc complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping including necessary formwork and finishing of exposed surfacs of concrete etc complete all as directed.

M&L for precast concrete 1:2:4 type B-1 (20mm graded stone aggregate)in manholes covers set in CM 1:4 including necessary form work etc complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, 100mm internal dia of pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L Mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia.

All as per item No 45 above but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders

M&L Rendering 5mm thick in CM 1:3 on soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like finished even and smooth without using extra cement. Complete all as specified and directed.

M&L 15mm thick rendering in two layers of 10mm thick backing coat in CM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound 3% by wt of cement on all external wall surfaces finished even and smooth without using extra cement. (Note : Water proofing compound shall be measured and paid seperately)

M&L 10mm thick bedding layer in CM 1:4 on roof top surfaces mixed with integral WPC 2% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as directed.

M&L for water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 Kg/Sqm and laying APP modified five layer polymeric membrane of minimum wt 3.50 kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gm/sqm) laid by torch application as per the manufacture instructions with side overlap of 100mm & end overlap of 150mm & tucked into the chases on vertical surfaces to a height of 300mm and finally finished with bituminuos aluminium paint @0.10 kg/sqm complete all as specified and as directed.

Surface dressing n.exc 15cm deep in soft/loose soil etc complete all as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 100mm thick as in sub base.

M&L PCC 1:3:6 type C1 using 20mm graded aggregate of 75 mm thick as in Plinth Protection.

M&L for glazed ceramic coloured tiles glossy finish in vertical surface 300x450x7-8mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed.

M & L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.06 sqm but n.exc 0.11 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

M&L Chequered cement concrete tiles, with grey cement and pigment 30cm x 30cm x 20mm thick set, jointed and pointed in neat cement slurrry in floors including 20mm thick screed bed in Cm 1:4 all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Complete all as specified and directed.

S&F powder coated (min thickness for powder coating 50 micron) aluminium frame for doors, windows, ventilators and partitions (fixed portions) with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F 4mm thick figured glass, pin headed type in squares n.exc 0.50 sq.m in each pane. Complete all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections, with cast or sheet barrel and rolled or cast bolts etc complete all as directed.

All as per item No 61 above but 100mm size

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, length of bolt 300 mm etc complete all as directed.

S&F 100mm size butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed etc complete all as directed.

S&F 150 mm size extruded aluminium handles fabricated type, anodised and polished etc complete all as directed.

All as per item No 65 above but 100mm size Complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed in any length, with rubber joints, laid in trenches or in floors Complete all as specified and directed

all as per item no 67 above but fixed to walls Complete all as specified and directed

S&F 75mm bore PVC (SWR) pipes single socketed in any length, with rubber joints, laid in trenches or in floors Complete all as specified and directed

All as per item no 69 above but fixed to walls Complete all as specified and directed

S&F Cast iron Nahani trap with diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed.

S&F PVC (SWR) 110mm dia bend of any radius. Complete all as specified and directed.

S&F PVC (SWR) 110mm dia double T equal or unequal at Junctions of any radius. Complete all as specified and directed.

S&F PVC (SWR) 75mm dia bend of any radius. Complete all as specified and directed.

S&F PVC (SWR) 75mm dia double T equal or unequal at Junctions of any radius. Complete all as specified and directed.

S&F PVC (SWR) 75mm dia vent cowls. Complete all as specified and directed.

S&F PVC (SWR) 110mm dia vent cowls. Complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia pipe etc complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed.

Supplying & laying of 20mm dia CPVC Pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifed and as directed.

Supplying & laying of 25mm dia CPVC Pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifed and as directed.

Supplying & laying of 40mm dia CPVC Pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifed and as directed.

S&F glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including seat cover, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device and flushing pipe including connection to trap and to flushing pipe, anti syphonage pipe etc complete all as directed.

S&F glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm with and including CI brackets, PVC waste pipe, 32 mm bore brass CP waste couplings with long screwed shanks and fly nuts etc complete all as specified and as directed.

S&F Vitreous China Urinal, Half stall type, white including flush pipe and waste pipe fixing with long brass screws on wall and bedding in CM 1:2 etc complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed

S&F chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook, complete all as specified and as directed by Engineer-in-Charge.

S&F chromium plated two way bib cock 15 mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F Brass chromium plated tubular towel rail, 600mm long between flanges fixed with screws and wooden/plastic cleats etc complete all as directed.

S&F 15mm size fancy type chromum plated Stop valves/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as directed.

S&F 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed.

S&F soap dish fixed with chromium plated brass screws and wooden/plastic cleats etc complete all as directed.

S&F 15mm size fancy type Bib taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

S&F 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engineer-in-Charge.

S&F Rotational moulded polythylene water storage tanks 500ltr (Cylinderical vertical with closed top ) hoisted and fixed in position all as per specified in SSR Pt-1. Complete all as specified and directed.

S&F 40mm bore gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

S&F 40mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified.

Supply and fix On site LDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. in conventional type, complete for 10 users complete all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed forthe following:-(a) One light point controlled by one switch

One fan point controlled by one switch and one regulator

One 3 pin switch socket outlet point 5 amps on independent board

All as per item No here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed.

Supply and fix switch piano flush button single pole oneway 5 amp complete all as specified and as directed.

Supply and fix switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed.

Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed.

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge

Supply and fix ceiling fan suitable for working on AC 230 volts, 50 Hz,1200 mm sweep 5 star rating with down rod and canopy colour of milky white including suitable fan hook anchor flashner for fixing of fan on ceiling complete all as specified and as directed.

Supply and fix energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

S & F LED mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant complete with IP 65/66 protection complete all as specified and directed.

Supply and fix exhaust fan steel body suitable for on working of AC 230 V ,50 Hz 300 mm sweep 1400 RPM,with heavy duty motor ,incl louvers complete all as specified

Supply and fix metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as as specified and as directed by Engineer-in-Charge

Supply and fix metal enclosure distribution board SPN, 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, complete all as as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix 25 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and directed

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed

M&L for cutting existing 40mm GI line and making branch connection of 25 mm dia GI line including fittings required for connection complete all as specified and directed

Supply and fix 25 mm bore Gun Metal gate valve with iron wheel head ISI Marked screwed both ends suitable for GI tubing complete all as specifed and directed

Supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of 1000 Litre capacity etc complete all as specified and directed.

M/s Saina Enterprises (BID ID -3410213)

RS ENGINEERING WORK (BID ID -3408973)

M/s Harjas Construction & Waterproofing Co (BID ID -3410382)

DEEPAK AGENCIES (BID ID -3410083)

M/s Kamal Electrical (BID ID -3408956)

SIMONS CONSTRUCTION (BID ID -3410179)

M/s Gurunath Construction (BID ID -3410012)

Bismi Builders & Enterprises (BID ID -3410035)

ABR Construction (BID ID -3411626)