REPAIR REPLACEMENT TO JOINERY PLASTERING FLOORING ROOFING INTERNAL WATER SUPPLY AND CONNECTED WORKS OF CERTAIN MD ACCN UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Taking down brick tiles,terracing tiles, single layer from roof laid, bedded and pointed in any mortar all as specified & directed.

Demolition of mud phuska in roof any thickness, including plaster and leaping/whether full thickness removed on only a part thereof. all as specified & directed.

M&L Roughening surfaces of old concrete surfaces by picking sweeping, cleaning old surface and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately)

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (A) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (B) Laying APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (C) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by GE

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

Demolition of brick work including all quoins, arches, pillars, etc built in cement mortar.

M&L for brick work in CM (1:6) straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks all as specified.

All as per item above but except bricks complete all as specified & directed

M&L for Brick wor with sub-class "B' Bricks straight or curved on plan to any radius in half brick thick wall built in CM ( 14). complete all as specified & directed

Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified.

M&L for Reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded cdrushed stone aggregate) as in chajjas and the like, all as specified and directed by GE.

Use and waste of form work to soffits of suspended slab,chajja etc and like similar work horizontal or sloping, fair finished surface of concrete, all as specified .

M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L for TMT bars 6mm to 8mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

Taking down cement plaster of any description & thickness from brick/concrete sufaces of wall/ceiling etc including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed.

M&L 15 mm thick Ready mix plaster (Make:- Ultratech readiplast /Birla Aerocon RMP /ACC Suraksha RMP ) on brickwork or concrete surfaces of wall (internal surface )finished even and smooth complete all as specified and as directed by GE.

M&L 15 mm thick Ready mix plaster (Make:- Ultratech readiplast /Birla Aerocon RMP /ACC Suraksha RMP ) on brickwork or concrete surfaces of wall (external surface )finished even and smooth complete all as specified and as directed by GE.

M&L 5 mm thick Ready mix plaster (Make:- Ultratech readiplast /Birla Aerocon RMP /ACC Suraksha RMP ) on brickwork or concrete surfaces of wall (ceiling )finished even and smooth complete all as specified and as directed by GE.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting, scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunited surface of required thickness to give even, uniform and smooth finish conforming to proper gerometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified. (Note : Steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor).

Supply only PD proof 101 LW (+) of Dr Fixit or eqe.

M&L preparation of newly plastered surface on walls and applying 2 coat of OBD over a one coat of primer complete all as specified.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified.

M&L for preparing new plastered surfaces of ceilling and applying three coats of white wash complete all as specified.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint incl a coat of primer complete all as specified .

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

M&L Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified

M/L PCC 1:2:4, type B1 40mm thick fair finished surfaces .as in flooring using 20 mm graded stone aggregate finished cement concrete surface even and smooth using extra cement complete all as specified & directed

M&L for glass dividing strips , 3mm thic and width of strip 38mm inserted in position to confirm design complete all as specified & directed

Dismantling and taking down of water storage tank capacity 250 ltr to 500 ltrs of PVC complete all as specified & directed

S&F in repair PVC Water storage tank 200 ltrs rectangular shape complete all as specified & directed

Supply and fixed rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity hoisted and fixed in position and connecting up pipes securing access covers all as specified and directed

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 20mm bore pipe complete all as specified & directed

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 15 mm bore pipe complete all as specified & directed

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified & directed

M&L 20 mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified & directed

Refixing of old steel tubing and connections in new or old position (all/floor/ceilings etc ) of size 15 mm bore complete all as specified & directed

Refixing of old steel tubing and connections in new or old position (all/floor/ceilings etc ) of size 20 mm bore complete all as specified & directed

S&F 75 mm bore PVC (SWR) Pipes single socket or with rubber ring, fixed to walls or in any position including taking down old damaged pipes complete all as specified and directed.

S&F PVC(SWR) bends plain 75mm bore complete all as specifed and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Non skid, coloured ceramic joint free tiles 7 to 8 mm thick 400 x 400mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick 400 x 400mm size of approved colour as in skirting/dado,etc including 10mm thick bacing coat in CM (1:4) to receive tiles ,set and jointed in neat cement slurry and pointed in coloured cement to match including triangular filleting in CM 1:4 on top complete all as specified & directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (300x450x7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by GE.

M&L for 10 mm thick rendering as backing coat on brick /concrete surfaces in cement mortar 1:4 rough finished on vertical surfaces to receive tiles etc. complete all as specified.

S&F in repair 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.

Dismantling wall & ceiling boards incl frame of any description as in panelling ceiling, partition, cub boards etc incl cover fillets in any surfaces complete

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light and taking down old false ceiling complete all as specified and directed.

Dismantling boarding any descriptin , fixed in any position with screws.

M&L for 18/19 mm thick PVC Shutter provided one side with one coating of ultra voilet chemical glossy matt finish including 100 % termite/water proof , fireretardent eco friendly weight not less 12 Kg per sqm fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware complete all as specified including 0.8 mm thick PVC edge binding tape around the thickness of PVC shutter edge complete all as directed by Engr-in-Charge

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified & directed

Refixing of shutters of any description exc 1 sqm but n.exc 2 sqm each in the same opening door exc 1 Sqm and not exc 2 Sqm on same opening complete all as specified & directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel n.exc 1.5 sqm complete all as specified & directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel exc 1.5 sqm but n.exc 4 sqm each complete all as specified & directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II.complete all as specified & directed

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on other side and as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per product Drg given on Sl. Page No. 157 of SSR Part-II 2010 complete all as specified & directed

M&L Fe 410 -W(Gde-E-250 ) quality -A for framed work as in doors or gates of angle or other section with gusset plate rails, braces, etc., complete drilled for fixing of steel sheeting or other covering,doors,etc to be prepared for hanging or slidingwith and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides ) and hanging; also fastening and fixing complete. complete all as specified & directed

S&F 35mm thick 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) complete all as specified & directed

S&F 35mm thick 2nd class HW plain framed, panelled shutter factory made (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified & directed

S&F steel windows in ahmedabad section with double shutter on single frame side hung including projecting type hinges with steel handle, peg stay complete with glazing bars ( one side glazed shutter and other side fly proof shutter with and including 15x3 mm flat iron frame for fly proof shutter ), fixed in repairs complete all as specified & directed

M &L Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

S & F butt hinges 100mm size Medium weight cold rolled mild steel fixed complete all as specified.

M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified & directed

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm cut to required size and fixed to wooden door/ steel window shutter with aluminium wire staples complete all as specified and directed.

S&F mild steel sliding door bolt plate type 250 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

Supply and fixing of mild steel cold rolled butt hinges medium weight 100 mm log fixed to steel /angle iron frame by welding ,if required complete all as specified.

S&F aluminum handles cast type, anodised, 150mm size complete all as specified .

S&F mild steel pressed steel handle, oval type, stove enamelled black 150 mm long complete all as specified.

S&F 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified.

M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long. all as specified.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, Overall length of cover plate 140 mm long and fixed in floor complete all as specified & directed

M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified.

S&F sheet glass ordinary quality, 3mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified & directed

S & F 3 mm thick figured glass pin head type and glazing with oil putty n exc 0.5 Sqm in each pane complete all as specified & directed

M&L for PCC (1:2:4 ) type B-1 ( using 20 mm graded stone aggregate ) as in bed blocks for fixing hold fasts of doos and windows frame complete all as specified and directed by GE.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified & directed.

S&F in repair 15mm bore dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

M&L Indian type WC including demolittion of cement concrete (unreinforced) in sunken portion of WC, area n.exc 1.20 sqm including removing of unserviceable materials and Providing half brick surrounding walls , rendering 10 mm thick plaster in cement mortar ( 1:4 ) with WPC and laying lean concrete in bottom portion of WC and then applying 3mm thick APP membrane over bitumen primer surface of walls and bottom portion of WC with torch method , provide 32 mm dia GI tubing as spout of sunken portion 0.60 m long of approved quality , By filling Khanger / cinder and lean concrete, supply and fix vitreous china Squatting pan "Orissa pattern" size 580x440mm white, with integral foot rest & ' P' traps & jointing new 100 mm dia CI pipe with lead joints to WC ( excluding flushing cistern & flush pipe ) . Testing of sunken portion will be carried out by filling water for 24 Hrs in sunken area complete in all respect as specified and directed . Note : - ( i ) WPC, floor and dado tiles will be measured and paid separately. (ii) Guarantee for non leaking in 3 yrs shall be given by contractor and Rs. 1000/- for each job shall be kept from final bill are from RAR and shall be released after satisfactory completion of three years from the certified date of completion.

S&F in repair PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete all as specified & directed.

S&F in repair Viterous China wash hand basin white, flat back size 550 x 400 mm incl CI or Angle iron 50x50x6 mm brackets one No CP fancy Pillar tap 15mm bore , one No 32 mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed by GE.

M&L for mild steel clamps, bands straps, supports or stays for soil waste pipe & rain water pipes including fixing clamps with coach screws etc complete all as spd and directed.

Dismantling cast iron pipe , jointed in cement mortar of dia 75mm. all as specified.

Dismantling cast iron pipe , jointed in cement mortar of dia 100mm. all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches all as specified.

All as per srl item above but 75mm bore pipes.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door. all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door complete all as specified & directed

M&L in rep for 15mm bore stop cock fancy type, chromium plated with long shank and cup (concealed type) complete all as specified & directed

S&F in rep of Bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated complete all as specified & directed.

S&F in repair stainless steel plate rack of size 75 cm X 60 cm X 25 cm made of 1 mm thick sheets and as approved by GE.

M&L 20 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed in CM 1:4 including demolition of stone slabs and tiles of any description laid bedded and pointed in any mortar, rubbish off the premises, all as specified and directed.

Round chamfering, to the edges of granite n.exc 15mm wide on granite stone shelves complete all as specified & directed

S&F in rep sinks with drainage board made of stainless steel 01 mm thick kitchen or laboratory with plugs,washers and wastes coupling including bedding in cement mortar to dwarf wall, neccessary masonary work or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm . complete all as directed.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 85680.00

M/S AADI ENTERPRISES

Shri Balaji Construction

AMIT BROTHERS

ANSH VANSH CONSTRUCTION COMPANY

DOLMA ASSOCIATES

VED PRAKASH ARORA

Baljeet Builders & Interior Decorators

The new hut furnitures